Machining Of Inconel-825 Superalloy With Magnetic Field Assisted Electrical Discharge Turning: A Optimization Approach Using Response Surface Methodology And Multi-Objective Genetic Algorithm
ROOPAK VARSHNEY,PARAM SINGH
DOI: https://doi.org/10.1142/s0218625x25500477
2024-10-01
Surface Review and Letters
Abstract:Surface Review and Letters, Ahead of Print. The aim of this study is to highlight the importance of optimizing machining parameters to improve the performance and surface integrity of Inconel-825 superalloy using the Electrical Discharge Turning (EDT) process, an important configuration of Electrical Discharge Machining (EDM). The study uses a Face-Centered Central Composite Design (FCCCD) to conduct experiments and applies the Response Surface Methodology (RSM) and multi-objective genetic algorithm (MOGA) to optimize input parameters. Various factors like Gap Current (Ig), pulse on time (Ton), rotational speed (N), and Magnetic field assistance (B) are adjusted at different levels, while outcomes such as Material Removal Rate (MRR), Tool Wear Rate (TWR), Overcut (OC), and Surface Roughness (Ra) are measured. Analysis of Variance (ANOVA) is used to understand the impact of each input factor on the outcomes. The results demonstrate that both RSM and MOGA provide accurate predictions closely aligned with experimental results, with MOGA showing a slight advantage in predicting tool wear and surface roughness. Specifically, the RSM solution achieved a desirability of 0.693 with parameters Ig at 8 A, Ton at 48.082[math][math]s, speed at 1399.988[math]RPM, and magnetic field at 0.3[math]T, achieving MRR of 5.182[math]mg/min, TWR of 3.138[math]mg/min, OC of 166.716[math][math]m, and Ra of 2.047[math][math]m. The MOGA solution featured parameters Ig at 8.045 A, Ton at 48.557[math][math]s, speed at 1360.3 RPM, and magnetic field at 0.3[math]T, yielding an MRR of 5.169[math]mg/min, TWR of 2.983[math]mg/min, OC of 170.037[math][math]m, and Ra of 2.060[math][math]m. SEM analysis confirmed improved surface quality under optimized conditions, while XRD analysis showed significant grain refinement and increased dislocation density.
chemistry, physical,physics, condensed matter