Abstract:The long-term stagnation in metal water supply pipes, usually caused by intermittent consumption patterns, will cause significant iron release and water quality deterioration, especially at the terminus of pipelines. Another common phenomenon at the terminus of pipelines is leakage, which is considered helpful by allowing seepage of low-quality drinking water resulting from long-term stagnation. In this study, the effect of laminar flow on alleviating water quality deterioration under different leakage conditions was investigated, and the potential thresholds of the flow rate, which can affect the iron release process, were discussed. Based on a galvanized pipe and ductile cast iron pipe pilot platform, which was established at the terminus of pipelines, this research was carried out by setting a series of leakage rate gradients to analyze the influence of different leakage flow rates on iron release, as well as the relationship with chemical and biological parameters. The results showed that the water quality parameters were obviously influenced by the change in flow velocity. Water quality was gradually improved with an increase in flow velocity, but its change regularity reflected a diversity under different flow rates (p < 0.05). The iron release was remarkably correlated to the redox potential, dissolved oxygen, pH, iron-oxidized bacteria and sulfate-reducing bacteria. The cumulative total iron release (r = 0.587, p < 0.05) and total iron release rate (r = 0.71, p < 0.022) were significantly influenced by the changes in flow velocity. In short, they tended first to increase and then to decrease with an increasing flow velocity with the threshold as approximately 40% of the critical laminar flow velocity (1.16 × 10−3 m/s). For the pipes at the terminus of the drinking water distribution system, when the bulk water was at the critical laminar flow velocity, the concentration of total iron, the quantity and rate of total iron release remain relatively in an ideal and safe situation.

An Overview of the Evolution of Degradation Mechanisms for Leaks in Metal Pipes and Joints and the Effectiveness of LLM and LMD Methods

Efficient Leak Localization in Water Distribution Systems Using Multistage Optimal Valve Operations and Smart Demand Metering

Change regularity of water quality parameters in leakage flow conditions and their relationship with iron release.

Experimental Study of External Pipe Wall Erosion Due to Water Pipe Leakage

A review of methods for leakage management in pipe networks

A review of leakage detection strategies for pressurised pipeline in steady-state

Leakage Quantification in Metallic Pipes under Different Corrosion Exposure Times

Recent Advances in Pipeline Monitoring and Oil Leakage Detection Technologies: Principles and Approaches

A Comprehensive Review of Polyethylene Pipes: Failure Mechanisms, Performance Models, Inspection Methods, and Repair Solutions

Estimation of leak area-pressure relationship for cracks on water pipes using models based on linear-elastic fracture mechanics

Evaluating Fitness-for-Service of Corroded Metal Pipelines: Structural Reliability Bases

Role of welding residual stress in stainless steel piping with application of the leak-before-break technology

Leakage Management influence on Water Age of Water Distribution Networks

Towards more realistic stochastic modelling of leakage in water distribution systems

An Integrated Bottom-Up Approach for Leak Detection in Water Distribution Networks Based on Assessing Parameters of Water Balance Model

Analysis of Leakage in a Sustainable Water Pipeline Based on a Magnetic Flux Leakage Technique

Permeation Damage of Polymer Liner in Oil and Gas Pipelines: A Review

Recent Developments of Subsurface Small-Leak Detection Techniques in Water Distribution Networks: A Review

Uncertainties in different leak localization methods for water distribution networks: a review

The monitoring approaches and non-destructive testing technologies for sewer pipelines