Abstract:Due to the escalating demands for computational power, coupled with a continuous reduction in the size of electronic packaging, thermal management for electronic devices has become increasingly critical in recent years. Ensuring that the temperature of electronic chips remains below a certain threshold is essential, since overheating can result in a decline in performance and chip breakdowns. To address the intensive cooling needs of heat-emitting chips, a variety of devices and methods have been explored, such as heat pipes, vapor chambers, pool boiling, spray cooling, and jet impingement cooling. Tailoring thermal and chemical characteristics of the target heated surface is one of the key factors in enhancing heat removal efficiency. This study highlights the critical role of employing advanced surface engineering techniques which particularly focuses on the integration of a novel semi-layered microporous copper structure, developed in conformity with a multi-level micro-cubic pin fin silicon substrate. The semi-layered microporous copper structure is fabricated using polystyrene sphere as the template to assist the electrodeposition of copper, with a low current density being employed to ensure meticulous fabrication. The initial gradient of the muti-level substrate is defined using silicon dioxide as the mask, setting the depth to encapsulate the PS template effectively. This foundational layer is crucial for confining the PS template securely in place. The second gradient is defined using photoresist as the mask to etch micro pin fin structures into the substrate, aimed at enhancing the adhesion between the substrate and the PS template and expand the heat exchange area. This meticulous structuring prevents the template from detaching during large-scale electroplating operations, ensuring the integrity of the micro fabrication process. The semi-layered microporous copper and the multi-level micro-cubic pin fin silicon substrate are both strategically designed to augment nucleation sites and enlarge the heat exchange surface area during the boiling heat transfer process within a pool boiling system. Further enhanced by the jet flow disturbances aimed directly at the heat transfer surface, facilitating rapid bubble removal and liquid replenishment, which contributes to delaying the onset of dry out. By employing Novec 649 as the coolant under a jet flow rate of 2.5L/min, we've reached a critical heat flux of 90/Wcm2 on a semi-layered microporous copper structure over a large heated area of 1.5 x 1.5 cm. This research provides valuable knowledge that can inform the development of highly effective surface engineering designs in high heat flux management systems.

Experimental parametric study of hierarchical micro/nano electrodeposited (six-step) pattern with respect to volcano-shape morphology in pool boiling performance augmentation

An experimental investigation of pool boiling augmentation using four-step electrodeposited micro/nanostructured porous surface in distilled water

Surface Modification Utilizing Photolithography Process for Pool Boiling Enhancement: An Experimental Study

Experimental study of electrospray deposition method parameters on TiO_2 coating structure in pool boiling performance enhancement

Experimental Study on Pool Boiling on Hydrophilic Micro/Nanotextured Surfaces with Hydrophobic Patterns

Recent Advances in the Critical Heat Flux Amelioration of Pool Boiling Surfaces Using Metal Oxide Nanoparticle Deposition

Pool Boiling Enhancement Via Surface Engineering for Thermal Management

Boiling performance enhancement and self-recovery of nucleate boiling regime on micro- and nanostructured porous surfaces

Influence of material properties of electrodeposited copper by different modes of electrodeposition on pool boiling heat transfer

Ultrascalable Three-Tier Hierarchical Nanoengineered Surfaces for Optimized Boiling

Development of micro/nanostructured-Cu-TiO2-nanocomposite surfaces to improve pool boiling heat transfer performance

Experimental study of pool boiling enhancement for surface structuring with inclined intersected mesochannels using WEDM method on copper surfaces

Experimental Study of Contact Angle and Active Nuleation Site Distribution on Nanostructure Modified Copper Surface in Pool Boiling Heat Transfer Enhancement

Three-Tier Hierarchical Structures for Extreme Pool Boiling Heat Transfer Performance

Pool boiling simulation using molecular dynamics approach: Comparing the effectiveness of adding nanoparticles versus creating porous nanostructures

Experimental investigation of pool boiling on Ti-Cu composite coated surfaces prepared using Electric Discharge Coating

Experimental and parametric study in pool boiling enhancement with self-induced jet impingement on the microporous copper surface using R1336mzz(Z)

Enhanced Boiling Heat Transfer on Composite Porous Surface

Review of surface modification in pool boiling application: Coating manufacturing process and heat transfer enhancement mechanism

Enhanced pool boiling heat transfer characteristics on microstructured copper surfaces coated with hybrid nanofluid

Progress in enhanced pool boiling heat transfer on macro- and micro-structured surfaces