Abstract:The production of small to medium-size aluminum gearbox housings at large quantities and high rates is commonly carried out by die casting. The manufactured parts are characterized by a very good surface finish and dimensional accuracy. However, a certain amount of gas porosity and shrinkage holes are to be expected. Since defects affect the mechanical properties of the housing, their reduction is also a main goal in the enhancement of the process. Improved material properties lead to higher strength and better gear performance. Despite die casting being cheap in comparison to sand casting, the costs of the casting equipment, whose main components are two hardened steel dies with the desired shape, are very high. Based on one particular gearbox housing, the objective of the present development project was to improve the quality of the gearbox housing by reducing its casting defects, while achieving simultaneously an overall improvement of the casting process. To this end, a new kind of die with integrated cooling channels was designed and evaluated using additive manufacturing technologies. First, the usual defects like cold casting sprue, sticking due to overheating, and solidification cavities of the cast part as well as the cooling behavior of the standard die were analyzed. Thus, the areas to be cooled down in a controlled way were identified and the corresponding cooling system was developed. Afterwards, an FEM analysis was carried out to check the die’s integrity during the casting process. The model was built according to given operating conditions. The stress analysis was efficiently studied on a variety of cooling channel designs. The results led to new and improved knowledge concerning the die’s stability. 3D metal printing was suitable for the manufacturing, because a clear additional benefit compared to the standard die was expected. Selective laser melting (SLM) was chosen because this technology allows the cooling system to be printed without a supporting structure. The material chosen was the tool steel 1.2709 (X3NiCoMoTi18-9-5). The die was printed and machined to its final dimensions using this material. Finally, the die casting mold was assembled and 15,000 casting rounds were executed by varying the temperature of the cooling oil. The type, number, and distribution of failures of the cast parts as well as the cycle duration were analyzed. As a result of the present work, the quality of the gearbox housing was improved concerning porosity and shrinkage holes. Furthermore, due to the targeted solidification, the casting process was shortened by about 11% per casting cycle.

Quality improvement of an aluminum gearbox housing by implementing additive manufacturing

Die Casting Die Design and Process Optimization of Aluminum Alloy Gearbox Shell

Design, Simulation and Optimization of an Additive Laser-Based Manufacturing Process for Gearbox Housing with Reduced Weight Made from AlSi10Mg Alloy

Reinventing quality in foundry castings through gearbox housing optimization: A case study approach

Increasing Performances in High Pressure Casting Process of Aluminium Alloys

Manufacturing of High Pressure Die Casting Die Inserts Using SLM

Optimizing the Gating System for Rapid Investment Casting of Shape Memory Alloys: Computational Numerical Analysis for Defect Minimization in a Simple-Cubic Cell Structure

Integration of Additive Fabrication with High-Pressure Die Casting for Quality Structural Castings of Aluminium Alloys; Optimising Energy Consumption

Design and simulation of a bearing housing aerospace component from titanium alloy (Ti6Al4V) for additive manufacturing

Innovative Post-Processing for Complex Geometries and Inner Parts of 3D-Printed AlSi10Mg Devices

Innovative Hybrid High-Pressure Die-Casting Process for Load-Bearing Body-In-White Structural Components

Casting Process Design of Automobile Clutch Gear Die Castings

Optimization of squeeze casting process of gearbox cover based on FEM and Box-Behnken design

Simulation Study on the Investment Casting Process of a Low-Cost Titanium Alloy Gearbox based on ProCAST

Casting Design Optimization Using Numerical Simulation of Precision Forging Die for Large Titanium Alloy Integral Bulkhead

A novel process for manufacturing spur gear with uniform microstructure and excellent strength-ductility synergy by warm mold continuous casting

Development of a New Cold Metal Transfer Arc Additive Die Manufacturing Process

Influence of High-Pressure Die Casting Process Parameters on the Compound Strength of Hybrid Components with Undercut Sheet Metal

A method for yield and cycle time improvements in Al alloy casting with enhanced conductivity steel for die construction

On the effect of post-processing techniques of the additively manufactured aluminum alloy parts