Abstract:Repeatable measurements with detachable transducers such as phased arrays have much potential for enhancing the sensitivity of nondestructive evaluation (NDE), as baseline subtraction can be employed. This paper aims to develop post-processing methods to overcome the variation between inspections which leads to poor subtraction performance. In this paper, ultrasonic immersion inspections are performed on a brass sample and a steel sample with a corroded backwall. Reference measurements are taken, and then small defects are machined to simulate defect growth in industrial applications. Defect types include two 1 mm diameter flat bottom holes (FBH) extending from 15 mm to 17 mm in the brass sample and two 2 mm diameter holes drilled to 1 mm depth from the corroded surface of the steel sample to represent the growth of localised pits. Although FMC/TFM is used in this paper, the defects have similar response amplitudes to the structural noise, and they cannot be detected or characterized directly from the images by the conventional 6 dB drop method. This paper demonstrates the utilization of ultrasonic measurements, together with cross-correlation, to obtain inspection variables which include array position and couplant wave velocity. By knowing the variations between inspection conditions, compensation is made in post-processing to improve image repeatability, and hence the performance of baseline subtraction. The SNR is improved by approximately 10–25 dB depending on how great the actual variations are. It is shown that these previously undetectable defects can be seen and accurately sized after conducting baseline subtraction with compensation.

Relationship of Gaussian Beam Theory to Scanned Ultrasonic Measurements with Commercial Transducers

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

Research of the Beam Steering Theory Based on Acousto-optic Effect

A Study of Inner Crack Testing with the Laser Phased Array Method.

Validation of Theoretical Diffraction Correction Functions for Strongly Focused High Frequency Ultrasonic Transducers

The dependence of transverse and longitudinal resolutions on incident Gaussian beam widths in the illumination part of optical scanning microscopy

A Novel Approach to Correct Diffraction Effect in Measurement of Ultrasonic Velocity and Attenuation at High Frequencies

Theory of Gaussian Beam Z Scan with Simultaneous Third- and Fifth-Order Nonlinear Refraction Based on a Gaussian Decomposition Method

Ultrasonic imaging with limited-diffraction beams

Finite-element and Experimental Study of Ultrasonic Beam Pattern Characterization

A new method for researching the acoustic field of a gas ultrasonic flowmeter based on a Gaussian beam

Improvement of SAFT based on multi-Gaussian beam modeling

Ultrasound field measurement using a binary lens

Efficient Double-beam Characterization for Fractured Reservoir

Spot size estimation of flat-top beams in space-based gravitational wave detectors

Grain Size Estimation using phased array ultrasound attenuation

Theory of Z -Scan Technique Using Gaussian-Bessel Beams with a Phase Object

Diffraction Effects in the Ultrasonic Field of a Piston Source

Ultrasonic imaging algorithms with limited transmission cycles for rapid nondestructive evaluation

Laser-induced Ultrasonic Measurements for the Detection and Reconstruction of Surface Defects

High fidelity ultrasonic measurements for defect detection and characterization