Abstract:China has abundant shale gas resources with good exploration value and development potential, making it a recent hotspot for exploration and development. It is widely agreed that large-scale hydraulic fracturing is essential for reservoir enhancement in shale formations. However, the evolution of fractures during hydraulic fracturing is highly complex, necessitating research on the influence of various factors on the vertical propagation of hydraulic fractures. Based on geological and engineering parameters from the Luzhou block in southern Sichuan, this study employed the finite element method (FEM) and the cohesive element method to establish a coupled fluid-solid model for the vertical propagation of hydraulic fractures. Numerical simulations were conducted to investigate the interaction between hydraulic fractures and natural weak planes, clarifying the mechanisms involved. This study elucidates how different rock and natural weak plane properties affect the vertical propagation of hydraulic fractures and draws diagrams illustrating these interactions. The research indicated three fracture distribution patterns after the intersection of hydraulic fractures with natural weak planes: passive fractures, 'I'-shaped fractures, and crossing fractures. The main fractures in these patterns exhibit initial damage and damage evolution characterized by tensile failure. Specifically, in passive fractures, the initial damage and damage evolution of natural weak planes manifest as shear failure. In 'I'-shaped fractures, the initial damage in natural weak planes is characterized by shear failure, with damage evolution showing tensile failure. Crossing fractures show minimal damage in the weak planes. Under conditions of high natural weak plane cohesive strength, high Young's modulus, low interlayer rock cohesive strength, high vertical stress difference, low interlayer stress difference, and high intersection angles, crossing fractures tend to form. Conversely, conditions of low natural weak plane cohesive strength, low Young's modulus, high interlayer rock cohesive strength, low vertical stress difference, high interlayer stress difference, and low intersection angles favor the formation of 'I'-shaped fractures. Passive fractures form under conditions of low natural weak plane cohesive strength and high vertical stress difference. This study found that Poisson's ratio has a minimal effect on the vertical expansion of hydraulic fractures under the studied conditions, with natural weak plane strength being the primary control factor for fracture patterns. These findings enhance the theoretical foundation for the vertical propagation of hydraulic fractures in deep shale formations, facilitating the development and implementation of strategies for enhancing production in shale reservoirs with natural weak planes and better optimizing production in different types of shale reservoirs.

Integration research of seismic data and logging for hydraulic fracturing in ultra-deep carbonate reservoirs with faults

Fracturing scheme design for unconventional reservoirs based on geology-engineering integration method

An Integrated quantitative modeling approach for fault-related fractures in tight sandstone reservoirs

Parameter Sensitivity Analysis of the Hydraulic Fracture Growth Geometry in a Deep Shale Oil Formation: an Experimental Study

Geomechanical modeling of ultradeep fault‐controlled carbonate reservoirs and its application, a case of the Fuman Oilfield in Tarim Basin

The Study and Application of In-situ stress Distribution in Ultra-deep Fractured-caved Carbonate Reservoirs

Numerical study of hydraulic fractures propagation in deep fracture-cavity reservoir based on continuous damage theory

The Influence of Rock and Natural Weak Plane Properties on the Vertical Propagation of Hydraulic Fractures

Integrated Simulation for Hydraulic Fracturing, Productivity Prediction, and Optimization in Tight Conglomerate Reservoirs

A 3-D Hydraulic Fracture Propagation Model Applied for Shale Gas Reservoirs with Multiple Bedding Planes

The Analysis of Hydraulic Fracture Morphology and Connectivity under the Effect of Well Interference and Natural Fracture in Shale Reservoirs

Main Controlling Factors and Prediction Model of Fracture Scale in Tight Sandstone: Insights from Dynamic Reservoir Data and Geomechanical Model Analysis

Dynamic Evolution Mechanism of the Fracturing Fracture System—enlightenments from Hydraulic Fracturing Physical Experiments and Finite Element Numerical Simulation

Study on the Vertical Propagation Behavior of Hydraulic Fractures in Thin Interbedded Tight Sandstone

Tectonic fracture prediction and its implication for hydrocarbon development with a case study in ultra-deep reservoirs of Kuqa Depression, Tarim Basin, NW China

Effects of Geo-Stress and Natural Fracture Strength on Hydraulic Fracture Propagation in a Deep Fractured Tight Sandstone Reservoir

Logging fracturing evaluation for tight clastic gas reservoir and its application:a case from Denglouku Formation in Wangfu fault depression,Songliao Basin

Physical Simulation Experiments of Hydraulic Fracture Initiation and Propagation under the Influence of Deep Shale Natural Fractures

Simulation of Key Influencing Factors of Hydraulic Fracturing Fracture Propagation in a Shale Reservoir Based on the Displacement Discontinuity Method (DDM)

Quantitative prediction of the drilling azimuth of horizontal wells in fractured tight sandstone based on reservoir geomechanics in the Ordos Basin, central China

A fracture modeling method for ultra-deep reservoirs based on geologic information fusion: an application to a low porosity sandstone reservoirs in X gas field of a basin in western China