Abstract:Vacuum ultraviolet irradiation coupled with photocatalytic oxidation (VUV-PCO) is an efficient and promising method for eliminating pollutants at room temperature; it involves three processes: vacuum ultraviolet (VUV) photolysis, photocatalytic oxidation (PCO), and ozone catalytic oxidation. Herein, toluene was chosen as the representative volatile organic compound (VOC), which is one of the most important precursors to form fine particulate matter and photochemical smog, because of its high toxicity and extensive existence in industries. All experiments were performed in a fixed-bed continuous-flow reactor that contained units for VUV photolysis and PCO. Mesoporous P-Mn-TiO2 was prepared by one-step hydrolysis and used as a catalyst for the oxidation of gaseous toluene under VUV irradiation through the VUV-PCO process. The as-prepared P-Mn-TiO2 samples were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), ultraviolet-visible light (UV-Vis) spectroscopy, and X-ray diffraction (XRD) analysis to determine the physicochemical properties of the catalysts and to determine the mechanisms of Mn doping and phosphoric acid modification and the effects of these processes on photocatalytic activity, ozone catalytic activity, and adsorption performance. The results indicated that the synergistic effect of phosphoric acid modification and Mn doping can improve the ozone catalytic activity and photocatalytic performance by increasing the number of oxygen active sites, completely eliminating the outlet ozone, and simultaneously promoting the efficient degradation of toluene. Moreover, doping TiO2 with Mn3+ significantly enhanced light harvesting, and numerous oxygen vacancies can be generated on the catalyst surface because of the presence of doped Mn3+ in the lattice, which adsorbs and transforms the oxygen species for toluene degradation. In addition, modification with an appropriate amount of phosphate groups can facilitate O-2 and O-3 adsorption on the TiO2 surface that can favor photo-induced charge carrier separation, thereby significantly improving the photocatalytic and ozone catalytic activities. The excellent catalytic performance of mesoporous P-Mn-TiO2 for toluene degradation and outlet ozone elimination was ascribed to the formation of highly reactive oxidizing species such as O(1D), O(3P), and center dot OH via the catalytic decomposition of O-3 adsorbed on the oxygen vacancy sites containing Mn and phosphate groups on the catalyst surface. In the VUV-PCO process, toluene was first destructed via VUV photolysis and oxidized by residual O-3 generated from VUV photolysis and the active oxygen species formed in the presence of the catalyst. Finally, toluene and the generated intermediate products were oxidized and degraded to CO2 and H2O through VUV-PCO. In addition, the outlet ozone byproduct was simultaneously eliminated by the multifunctional catalyst.

Influence of palladium content dispersed in the TiO2 photocatalyst for degradation of volatile organic compounds in gas emission

TiO 2 -based Pd/Fe bimetallic modification for the efficient photothermal catalytic degradation of toluene: The synergistic effect of ∙O 2 – and ∙OH species

Tuning the metal-support interactions in titanium dioxide-supported palladium photocatalysts against toluene in air

Regulation of Electron Density in Pt Nanoparticles Via Bimetallic Metal-Organic Frameworks for Enhancing Photothermal Catalysis of Toluene Decomposition

Insights into the surface Structure-Sensitive photocatalytic oxidation of gaseous toluene on Pd/TiO2 catalysts

A Facile Route for Spraying Preparation of Pt/TiO2 Monolithic Catalysts Toward VOCs Combustion

Robust Photocatalytic Performance of Tio2/Bi2wo6 Photocatalysts with Trace Fe Dopant for Gaseous Toluene Decomposition

Photocatalytic degradation of gaseous toluene and ozone under UV254+185 nm irradiation using a Pd-deposited TiO2 film

PdPty/V2O5-TiO2: Highly Active Catalysts with Good Moisture- and Sulfur Dioxide-Resistant Performance in Toluene Oxidation

Influence of Pd, Pt and Au nanoparticles in the photocatalytic performance of N-TiO2 support under visible light

Gas-Phase Photocatalytic Oxidation of No over Palladium Modified Tio2 Catalysts

Enhanced performance of photocatalytic oxidation of indoor toluene over Pd/TiO2 catalyst by tuning surface defect concentrations

Efficient catalytic oxidation of VOCs by a Pd-Pt/SiO 2 catalyst: The cooperative catalysis of dual metal sites

Isolated Pt Single Atomic Sites Anchored on Nanoporous TiO2 Film for Highly Efficient Photocatalytic Degradation of Low Concentration Toluene.

Enhanced Photocatalytic Performance Toward CO2 Hydrogenation over Nanosized TiO2-Loaded Pd under UV Irradiation

Phosphate- and Mn-Modified Mesoporous TiO2 for Efficient Catalytic Oxidation of Toluene in VUV-PCO System

Characterization and activity of Pd-modified TiO2 catalysts for photocatalytic oxidation of NO in gas phase.

Enhanced visible light photocatalytic VOC oxidation via Ag-loaded TiO2/SiO2 materials

Toluene Degradation over Mn-TiO2/CeO2 Composite Catalyst under Vacuum Ultraviolet (VUV) Irradiation

TiO2 Modification with Transition Metallic Species (Cr, Co, Ni, and Cu) for Photocatalytic Abatement of Acetic Acid in Liquid Phase and Propene in Gas Phase

Enhanced activity for catalytic combustion of ethylene by the Pt nanoparticles confined in TiO2 nanotube with surface oxygen vacancy