Abstract:Due to the increasing demand for clean and sustainable energy, wind turbine technology has also witnessed significant developments in terms of its output capacity which is proportional to its size (length of wind turbine blades). The only limitation to this scaling is the availability of applicable materials with expected strength and low weight which can support a longer span wind turbine blade. Although studies have been carried out on alternate materials for the development of wind turbine blades, the use of Grey Relational Analysis for the optimization of natural fiber-reinforced composites for this application is rare. Also, pineapple leaf fiber, having considerable mechanical properties and low density has not been optimally considered as reinforcement in this regard. This is a robust study concerned with developing more eco-friendly materials for application in the manufacture of wind turbine blades. In this study, a material P x G y E z , a natural fiber/synthetic fiber polymer composite was developed and optimized based on the major criteria for selecting materials for wind turbine blades which are high tensile strength, high flexural strength, and low density. Grey relational analysis coupled with the Taguchi robust optimization technique was used for the optimization process and statistical analysis was employed to know the percentage contribution of each of the variable parameters (PALF volume percentage, glass fiber volume percentage, and fiber length) to the grey relational grades. The material P 10 G 20 E 15 was the optimum having a grey relational grade of 0.7977 at experimentation and tensile strength of 95.3144 MPa, a flexural strength of 92.818 MPa, and a density of 1.3274 g/cm 3 . SEM analysis showed microstructural formations that explained the mechanical and physical behavior of the optimized hybrid composite. Simulation of an NREL 5 MW wind turbine blade developed with the optimized material P 10 G 20 E 15 proved reliable for service with a 64% reduction in weight. Graphical

Reliability Analysis of a Composite Wind Turbine Blade Section Using the Model Correction Factor Method: Numerical Study and Validation

THE STRUCTURAL ANALYSIS METHOD OF WIND TURBINE BLADE BASED ON MECHANICS OF COMPOSITE MATERIALS

Structural Optimization and Influence Factors on Reliability for Composite Wind Turbine Blade

Reliability analysis of composite wind turbine blades considering material degradation of blades

Risk-based maintenance strategy selection for wind turbine composite blades

Progressive Failure Analysis for 5MW-Class Wind Turbine Composite Blades with Debonding Damage based on CZM Method

Integrating variable wind load, aerodynamic, and structural analyses towards accurate fatigue life prediction in composite wind turbine blades

Quick Method for Aeroelastic and Finite Element Modeling of Wind Turbine Blades

Numerical Modeling and Analysis of a Horizontal Axis RM1 NACA-4415 Wind Turbine

Finite Element Analysis for Composite Blade Structure of Large Wind Turbine

State of the art in fatigue modelling of composite wind turbine blades

Validation of a modeling methodology for wind turbine rotor blades based on a full-scale blade test

Multi-objective optimization and modeling of a natural fiber hybrid reinforced composite (PxGyEz) for wind turbine blade development using grey relational analysis and regression analysis

Monitoring Based Fatigue Damage Prognosis of Wind Turbine Composite Blades under Uncertain Wind Loads

Development of a Reliability-Mechanical: Numerical Model of Mechanical Behavior of a Multilayer Composite Plate

Updating Finite Element Model of a Wind Turbine Blade Section Using Experimental Modal Analysis Results

Comparison of different cross-sectional approaches for the structural design and optimization of composite wind turbine blades based on beam models

Prediction of the Damage Effect on Fiberglass-Reinforced Polymer Matrix Composites for Wind Turbine Blades

Reliability-based Low-Cycle Fatigue Damage Analysis for Turbine Blade with Thermo-Structural Interaction

Structural analysis of offshore wind turbine blades using finite element method