Abstract:The sorption curve is an essential feature for the modelling of heat and mass transfer in porous building materials. Several models have been proposed in the literature to represent the amount of moisture content in the material according to the water activity (or capillary pressure) level. These models are based on analytical expressions and few parameters that need to be estimated by inverse analysis. This article investigates the reliability of eight models through the accuracy of the estimated parameters. For this, experimental data for a wood fibre material are generated with special attention to the stop criterion to capture long time kinetic constants. Among five sets of measurements, the best estimate is computed. The reliability of the models is then discussed. After proving the theoretical identifiability of the unknown parameters for each model, the primary identifiability is analysed. It evaluates whether the parameters influence on the model output is sufficient to proceed the parameter estimation with accuracy. For this, a continuous derivative-based approach is adopted. Seven models have a low primary identifiability for at least one parameter. Indeed, when estimating the unknown parameters using the experimental observations, the parameters with low primary identifiability exhibit large uncertainties. Finally, an Approximation Bayesian Computation algorithm is used to simultaneously select the best model and estimate the parameters that best represent the experimental data. The thermodynamic and \textsc{Feng}--\textsc{Xing} models, together with a proposed model in this work, were the best ones selected by this algorithm.

Kinetic Models for the Sorption of Dye from Aqueous Solution by Wood

Kinetics and diffusion processes in colour removal from effluent using wood as an adsorbent

Kinetic study and sorption mechanism of methylene blue and methyl violet onto mansonia (Mansonia altissima) wood sawdust

KINETICS AND PROCESS MODELS FOR DEGRADATION OF AZO DYE CARPLON RED BY LIGNIN PEROXIDASES

Fractional Kinetic Strategy toward the Adsorption of Organic Dyes: Finding a Way Out of the Dilemma Relating to Pseudo-First- and Pseudo-Second-Order Rate Laws

Biosorption of Acid Black 172 and Congo Red from aqueous solution by nonviable Penicillium YW 01: kinetic study, equilibrium isotherm and artificial neural network modeling.

Intraparticle diffusion in single and multicomponent acid dye adsorption from wastewater onto carbon

Adsorption of Dyes and Phenol from Water on Resin Adsorbents: Effect of Adsorbate Size and Pore Size Distribution

A Comparison of Chemisorption Kinetic Models Applied to Pollutant Removal on Various Sorbents

Passive Sampler Exchange Kinetics in Large and Small Water Volumes Under Mixed Rate Control by Sorbent and Water Boundary Layer

A Revised Pseudo-Second Order Kinetic Model for Adsorption, Sensitive to Changes in Sorbate and Sorbent Concentrations

Adsorption of Water-Soluble Dye onto Functionalized Resin

Computational Identification and Analysis of the Key Biosorbent Characteristics for the Biosorption Process of Reactive Black 5 Onto Fungal Biomass

Kinetics region and model for mass transfer in carbon dioxide absorption into aqueous solution of 2-amino-2-methyl-1-propanol

A General Kinetic Model for Adsorption: Theoretical Analysis and Modeling

Biosorption of the metal-complex dye Acid Black 172 by live and heat-treated biomass of Pseudomonas sp. strain DY1: kinetics and sorption mechanisms.

Batch Kinetics of Metal Biosorption: Application of the Bohart-Adams Rate Law

Intraparticle diffusion processes during acid dye adsorption onto chitosan

Parameter estimation and model selection for water sorption in a wood fibre material

Adsorption of azo dye by biomass and immobilized Yarrowia lipolytica; equilibrium, kinetic and thermodynamic studies

Kinetics, mechanism, isotherms, and design analysis on the removal of toxic dye from water using surface-modified agro-waste biomass