PENERAPAN METODE SIX SIGMA DMAIC: KASUS PROSES BAG MAKING KEMASAN PLASTIK LENTUR STANDING POUCH ALU-FOIL PADA PT. PJL
Muhammad Ardiansyah
2019-05-07
Abstract:PT. PJL is a company that manufactures flexible plastic packaging having
problems with the quality of their products which results in high complaints from
customers, especially on Alu-foil standing pouch products which have 38%
complaints from total complaints per January-September 2018. Research is
conducted to reduce the number of defects that appear so that the level of
complaints decreases and profit increases. The Six Sigma DMAIC method is
applied in this study to see what are the dominant defects and improve solutions.
It is known that the bag making process has a high number of defects of 4.65%
and is at the sigma level of 3.18. Wrinkle defects (42.27%), setting defects
(13.38%), blashing defects (9.64%), line defects (5.85%) and stretch defects
(5.69%) became the dominant defects that appeared in bag making process of
standing pouch Alu-foil. Wrinkle defects are then selected for improves. Using
Quick-win, FMEA and Why-why analysis found a improve solution and managed
to eliminate wrinkle defects to 0.00% which resulted in an increase in sigma level
to 3.20 and cost savings of 10.91%.
Keyword: Six Sigma, Flexible Packaging, DMAIC, Pareto Analysis, FMEA
PT. PJL merupakan perusahan yang memproduksi kemasan plastik lentur (flexible
packaging) mengalami masalah pada kualitas produk mereka yang berakibat
tingginya komplain dari pelanggan terutama pada produk standing pouch alu-foil
yang memiliki 38% komplain dari total komplain per Januari-September 2018.
Penelitian kemudian dilakukan untuk menurunkan jumlah defect yang muncul
agar tingkat komplain menurun serta profit meningkat. Metode Six sigma DMAIC
kemudian diterapkan pada penelitian ini untuk melihat apa saja defect yang
dominan serta solusi perbaikanya. Kemudian diketahui bahwa proses bag making
terdapat jumlah defect yang tinggi sebesar 4,65% dan berada pada level sigma
3,18. Defect Keriput (42,27%), defect setting (13,38%), defect blashing (9,64%),
defect garis (5,85%) dan defect mulur (5,69%) menjadi defect dominan yang
muncul pada proses bag making standing pouch alu-foil. Defect keriput kemudian
dipilih untuk dilakukan perbaikan. Dengan menggunakan Quick-win, FMEA serta
Why-why analysis ditemukan solusi perbaikan dan berhasil menghilangkan defect
keriput menjadi 0,00% yang berdampak pada peningkatan level sigma menjadi
3,20 serta penghematan biaya sebesar 10,91%.
Kata Kunci: Six Sigma, Flexible Packaging, DMAIC, Analisis Pareto, FMEA.
Mathematics,Business,Engineering