Abstract:Microneedle (MN)-based electrochemical biosensors hold promising potential for noninvasive continuous monitoring of interstitial fluid biomarkers. However, challenges, such as instability and biofouling, exist. This study proposes a design employing hollow MN to encapsulate a zwitterionic polymer hydrogel sensing layer with excellent biocompatibility and antifouling properties to address these issues. MN shell isolates the internal microporous sensing layer from subcutaneous friction, and the hydrogel filling leverages the MNs' three-dimensional structures, enabling high-dense loading of biorecognition elements. The hollow MNs are successfully fabricated from high-molecular-weight polylactic acid via drawing lithography, exhibiting sufficient strength for effective epidermis penetration. Additionally, a high-performance gold nanoconductive layer is successfully deposited inside the MN hollow channel, establishing a stable electrical connection between the polymer MN and the hydrogel sensing layer. To support the design, numerical simulations of position-based diffusive analyte solutes reveal fast-responsive electrochemical signals attributed to the high diffusion coefficient of the hydrogel and the concentrated structure of the hollow channel encapsulation. Experimental results and numerical simulations underscore the advantages of this design, showcasing rapid response, high sensitivity, long-term stability, and excellent antifouling properties. Fabricated MN sensors exhibited biosafety, feasibility, and effectiveness, with accurate and rapid in vivo glucose monitoring ability. This study emphasizes the significance of rational design, structural utilization, and micro-nanofabrication to unlock the untapped potential of MN biosensors.

Microfluidic chip connected to porous microneedle array for continuous ISF sampling

Microfluidic chip to interface porous microneedles for ISF collection

A Swellable Microneedle Patch to Rapidly Extract Skin Interstitial Fluid for Timely Metabolic Analysis.

Porous Microneedles Through Direct Ink Drawing with Nanocomposite Inks for Transdermal Collection of Interstitial Fluid.

Interstitial Fluid Biomarkers' Minimally Invasive Monitoring Using Microneedle Sensor Arrays.

Microneedle Arrays for Sampling and Sensing Skin Interstitial Fluid

PDMS porous microneedles used as engineered tool in advanced microfluidic devices and their proof-of-concept for biomarker detection

Biocompatible Core-Shell Microneedle Sensor Filled with Zwitterionic Polymer Hydrogel for Rapid Continuous Transdermal Monitoring

Sampling Dermal Interstitial Fluid Using Microneedles: A Review of Recent Developments in Sampling Methods and Microneedle‐Based Biosensors

An Integrated Wearable Differential Microneedle Array for Continuous Glucose Monitoring in Interstitial Fluids

Microneedle sensors for dermal interstitial fluid analysis

Fabrication of sponge-forming microneedle patch for rapidly sampling interstitial fluid for analysis

Enhanced Interstitial Fluid Extraction and Rapid Analysis via Vacuum Tube-Integrated Microneedle Array Device

Hydrogel Microneedle-Assisted Assay Integrating Aptamer Probes and Fluorescence Detection for Reagentless Biomarker Quantification

Microneedle-Integrated Sensors for Extraction of Skin Interstitial Fluid and Metabolic Analysis

Opportunities and Challenges of Microneedle Electrochemical Sensors for Interstitial Fluid Detection

Wearable Sensor Patch with Hydrogel Microneedles for In Situ Analysis of Interstitial Fluid.

Micromachined biosensor system for interstitial fluid sampling and glucose monitoring

A Wearable Touch‐Activated Device Integrated with Hollow Microneedles for Continuous Sampling and Sensing of Dermal Interstitial Fluid (Adv. Mater. 2/2024)

3D printing by two-photon polymerization of hollow microneedles for interstitial fluid extraction

Fabrication of Antibacterial Sponge Microneedles for Sampling Skin Interstitial Fluid