Experiments and Modeling of Machined Spring Rotary Actuators with Shape Memory Alloys
Tiegang Chen,Yuhang Zhang,Shengbin Qiu,Jun Jiang,Qiang Zhang,Xiaoyong Zhang
DOI: https://doi.org/10.3390/ma15196674
IF: 3.4
2022-09-27
Materials
Abstract:This paper presents a novel rotary actuator using an NiTi shape memory alloy machined spring (SMAMS). An analytical model is put forward to describe the relationship between the twist angle and temperature of SMAMSs under different applied torques. Following that, a numerical model is developed to analyze the stress distributions and twist angle-torque responses of the SMAMS, tube, and spring of the circular cross-section. Thus, the advantages of the SMAMS over the other two rotary actuators are obtained. Moreover, experiments with SMAMSs are conducted to validate these models and study their mechanical responses. Results show that the SMAMS can be designed to have a larger twist angle than the cylindrical-type rotary actuators and to bear a larger torque than the wire-based-type rotary actuators, provided that the inner and outer diameter remains unchanged. Specifically, the maximum actuating twist angle of SMAMSs reaches 278.5°, and their maximum actuating torque is 0.312 N·m. The maximum two-way twist angle of SMAMSs reaches 171° at the pre-applied torque of 0.12 N·m. Moreover, the geometry is found to have a significant influence on the actuating capacity of SMAMSs. When the moments of inertia of SMAMS are 0.82 and 4.69, the corresponding torsion angles are 185.3° and 29.8°, respectively. In general, the SMAMSs with a larger moment of inertia can withstand a larger load. This work fills the gap between wire-based-type rotary actuators and cylindrical-type rotary actuators and is expected to expand the use for SMAs in the rotary actuator.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering