Abstract:The symmetrical optical waveguide structures are fabricated in Er3+-doped aluminosilicate glass using 800 nm femtosecond laser writing in kHz repetition frequency regime. The impact of writing parameters on the waveguide preparation with a 10× microscope objective in the longitudinal writing scheme was studied in detail. The experimental results show that, under a fixed pulse energy value of 20 μJ, the waveguides can be realized with the scan speed from 20 to 160 μm/s, and with a fixed scan speed value of 160 μm/s, the waveguide can be prepared under an inscription energy range of 5–30 μJ, indicating that the waveguide can be realized in a wide range of writing parameters. The near-field mode intensity image shows that the waveguide region possesses excellent light guiding properties. Based on the refractive index profile reconstruction method, the maximum refractive index increase in the waveguide region is estimated to be about 5.5 × 10–4. The lowest propagation loss of the waveguide was measured to be about 1.51 dB/cm by the waveguide side scattering method. The microfluorescence spectra show that the gain characteristics of the waveguide region are well maintained after laser processing. This work shows that the fabrication of embedded optical waveguides using ultrashort pulse laser in Er3+-doped aluminosilicate glass has strong feasibility and great potential to create active gain devices in the field of integrated photonics and all-optical communication.

Laser action from a femtosecond laser written Yb: phosphate glass waveguide

1550-Nm Light Amplification from Erbium-Doped Silica Glass Waveguide Written by Femtosecond Laser Pulses

A 100 mW monolithic Yb waveguide laser fabricated using the femtosecond laser direct-write technique

Guided-Wave Up-Conversion Luminescence in Er3+/Yb3+ Co-doped Phosphate Glass Waveguide Produced by Direct Femtosecond Laser Writing

Planar waveguide nanolaser configured by dye-doped hybrid nanofilm on substrate

Direct Writing of Channel Optical Waveguides in Er 3+ -Doped Aluminosilicate Glass by Low Repetition Rate Femtosecond Laser

Near-Infrared, Mode-Locked Waveguide Lasers with Multi-Ghz Repetition Rates

Femtosecond-laser-written Microstructured Waveguides in BK7 Glass

Femtosecond laser direct writing of multiwavelength Bragg grating waveguides in glass

Femtosecond laser direct writing of compact Tm:YLF waveguide lasers

Direct writing waveguides inside YAG crystal by femtosecond laser

1.8-µm laser operation based on femtosecond-laser direct written Tm:YVO4 cladding waveguides

Transparent Ho,Yb:YAG crystal waveguide inscribed by direct femtosecond laser writing

~1 µm laser output based on heterogeneous fiber with Yb3+-doped fluorophosphate core and phosphate cladding

Tm,Ho:YLF waveguide lasers at 2.05 µm

From near-UV to long-wave infrared waveguides inscribed in barium fluoride using a femtosecond laser

Optical ridge waveguides in Nd3+‐doped fluorophosphate glasses fabricated by carbon ion implantation and femtosecond laser ablation

A Directly-Written Monolithic Waveguide-Laser Incorporating a DFB Waveguide-Bragg Grating

Laser emission from buried depressed-cladding waveguides inscribed in Nd:YAG ceramics by picosecond-laser beam writing

Ultrafast Laser Inscription of High Performance Mid-Infrared Waveguides in Chalcogenide Glass

Y-branch waveguide splitters inscribed in Nd:KGW crystal by femtosecond laser writing: realization and laser emission