Abstract:Purpose This paper aims to investigate the effect of alternating current (AC) on corrosion, it is not yet clear about the exact mechanism of the corrosion induced by AC. Previous reports indicated that AC corrosion was similar to the effect of continuous cathodic and anodic polarization on the corrosion process of the metals. Wan et al. studied the effect of negative half-wave AC on stress corrosion cracking behavior and mechanism of X80 pipeline steel in near-neutral solution. Design/methodology/approach This study attempted to understand the AC-induced corrosion by imposing the half-cycle AC on the X80 pipeline steel in an acid bicarbonate solution. The AC corrosion mechanism was determined by weight loss and potentiodynamic polarization curve measurements, as well as surface characterization. Findings The results show that the positive half-cycle AC accelerated the uniform corrosion in the NaHCO3 solution, the negative half-cycle AC would decrease the uniform corrosion and local corrosion was increased and some Ca and Mg deposited on the surface of X80 steel, so the corrosion rate decreased by negative half-cycle AC. The corrosion product was composed of α -FeOOH under the application of positive half-cycle AC. The oxygen reduction led to a local increase of pH near the electrode surface and led to the formation of α -FeOOH, which enhanced the protectability of corrosion products. Originality/value Researchers studied the effect of negative half-wave AC on stress corrosion cracking behavior and mechanism of X80 pipeline steel in near-neutral solution. However, the AC behavior and corrosion mechanism in acid solution are unknown. So to make clear about the corrosion behavior of metals in different polarization states and the mechanism involved, diode technology was used to research the AC corrosion, half-wave AC was applied on the metals after the full-wave rectified.

Corrosion of Metals by Applied Alternating Currents

Effect of pH value on corrosion of carbon steel under an applied alternating current

Study on the Corrosion Behavior and Mechanism of 6061 Aluminum Alloy under Alternating Current Interference in 3.5% NaCl Solution

CORROSION BEHAVIOR OF RUSTED MILD STEEL UNDER MEANS OF WET/DRY ALTERNATE CONDITIONS

Corrosion of Copper, Cupronickel, Nickel Aluminium Bronze and Super-Duplex Stainless Steel Rotating Cylinder Electrodes in Seawater under Turbulent Flow Conditions

Electrochemical and Stress Corrosion Mechanism of Submarine Pipeline in Simulated Seawater in Presence of Different Alternating Current Densities

Galvanic Effect and Alternating Current Corrosion of Steel in Acidic Red Soil

X80 Steel Corrosion Induced by Alternating Current in Water-Saturated Acidic Soil

Galvanic Corrosion of Brass/Steel 907a Couple in Artificial Seawater

Electrochemical studies of the galvanic coupling zinc/pipeline steel in the presence of an applied alternating current

Effects of Alternating Magnetic Field on the Corrosion Rate and Corrosion Products of Copper

The influence of half-cycle rectified sinusoidal alternating current (AC) on corrosion of X80 pipeline steel in an acid bicarbonate solution

Wavelet Analysis of Electrochemical Noise Measurements During Atmospheric Corrosion of Mild Steel in the Simulated Marine Environment

Discussion on “determination of the Fate of the Current in the SCC of Sensitized Type 304 SS in High Temperature Aqueous Systems”

Atmospheric Corrosion Behavior of Tin under an Alternating Current Electric Field

Calculations of the Cathodic Current Delivery Capacity and Stability of Crevice Corrosion under Atmospheric Environments

Corrosion Behavior of Mild Steel in the Presence of Urea, Sodium Chloride, Potassium Chloride, and Glycine: A Kinetic and Potentiodynamic Polarization Study Approach

Low power electrocorrosion for sample preparation: identification of metals in alloys

Corrosion behavior of high- and low-chromium steel grinding balls in chloride solution

A Comparative Study of the Corrosion Behavior of 30CrMnSiNi2A in Artificial Seawater and Salt Spray Environments

Study on the Microstructure and Alternating Current Corrosion Behavior of SAF2507 Super-Duplex Stainless Steel in 3.5%NaCl Solution