Abstract:2,4-dichlorophenol (2,4-DCP) is a toxic and harmful organic intermediate widely used in industrial production. Recently, the utilization of nano-zero-valent iron (NZVI) for 2,4-DCP treatment has gained significant popularity, but the deactivation and agglomeration of NZVI always appear and continue to present challenges. To address these issues, sodium carboxymethyl cellulose (CMC) and noble metal catalyst Pd are used as stabilizers to improve the removal efficiency of NZVI on 2,4-DCP. The CMC-modified nanoscale Pd/Fe bimetal (CMC-Pd/Fe) particles were prepared by the liquid phase reduction method and characterized by scanning electron microscopy (SEM), Fourier infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The results showed that the addition of Pd and CMC succeeded in ameliorating the aggregation of NZVI. A five-level-four-factor central composite design (CCD) of response surface methodology (RSM) was used to optimize the removal of 2,4-DCP by CMC-Pd/Fe and explored the factors influencing the removal of 2,4-DCP, including the amount of catalyst, the initial pH of the system, the time of reaction, and the initial concentration of 2,4-DCP. A statistically significant and well-fitting quadratic regression model was successfully constructed to predict 2,4-DCP removal efficiency. The high F-value of 14.35, very low p-value (<0.0001), nonsignificant Lack of Fit, and appropriate coefficient of determination of 0.9399 demonstrate a good correlation between the experimental and predicted values of the proposed model. The analyses of variance reveal catalyst amount and reaction time have a positive effect on the removal efficiency of 2,4-DCP and the CMC-Pd/Fe catalyst amount shows the most apparent significance, with PC (percent contribution) greater than 26. Conversely, pH and 2,4-DCP concentration have a negative impact on the removal process. The optimum condition is 1.10g/L of catalyst amount, 5.63 of pH, 2.31h of reaction time, and 20mg/L of initial 2,4-DCP concentration. The validation results from parallel experiments showed that the average removal efficiency of 2,4-DCP reached 96.32% under the optimal conditions.

Efficient Removal of 2,4-DCP by Nano Zero-Valent Iron-Reduced Graphene Oxide: Statistical Modeling and Process Optimization Using RSM-BBD Approach

Comprehensive Understanding of Adsorption and Reduction on 2,4-DCP and Cr(VI) Removal Process by NZVI-rGO: Performance and Mechanism

Optimization on Removal of 2,4-Dichlorophenol by Sodium Carboxymethyl Cellulose Modified Nanoscale Pd/Fe Bimetal with Response Surface Methodology

Influence Factors on Removal of 2, 4-DCP by Sulfided Nanoscale Zerovalent Iron

Mechanism and Influence Factors of 2,4‐D Dechlorination by Sodium Citrate‐activated Bimetallic Palladium‐zero Valent Iron Nanoparticles

Reduced Graphene Oxide Supported Fe/Ni Bimetallic Nanoparticles for the Rapid Adsorption and Dechlorination of 2,4-Dichlorophenol

[Removal of 2,4-Dichlorophenol in Underground Water by Stabilized Nano Zero-valent Iron].

Graphene Oxide-Supported Nanoscale Zero-Valent Iron Composites for the Removal of Atrazine from Aqueous Solution

Activation of Persulfate by Stability-Enhanced Magnetic Graphene Oxide for the Removal of 2,4-Dichlorophenol

The Influence of Pluronic F-127 Modification on Nano Zero-Valent Iron (NZVI): Sedimentation and Reactivity with 2,4-Dichlorophenol in Water Using Response Surface Methodology

Optimizing the Removal of Rhodamine B in Aqueous Solutions by Reduced Graphene Oxide-Supported Nanoscale Zerovalent Iron (nzvi/rgo) Using an Artificial Neural Network-Genetic Algorithm (ANN-GA)

Removal of Crystal Violet by Using Reduced-Graphene-Oxide-Supported Bimetallic Fe/Ni Nanoparticles (rGO/Fe/Ni): Application of Artificial Intelligence Modeling for the Optimization Process

Artificial Neural Network Modeling and Genetic Algorithm Optimization for Cadmium Removal from Aqueous Solutions by Reduced Graphene Oxide-Supported Nanoscale Zero-Valent Iron (nzvi/rgo) Composites

Synthesis and Characterization of Reduced Graphene Oxide-Supported Nanoscale Zero-Valent Iron (nzvi/rgo) Composites Used for Pb(II) Removal

The Reaction Pathway and Mechanism of 2,4-Dichlorophenol Removal by Modified Fly Ash-Loaded Nzvi/ni Particles

Adsorption and Dechlorination of 2,4-Dichlorophenol (2,4-DCP) on a Multi-Functional Organo-Smectite Templated Zero-Valent Iron Composite

Highly Efficient Removal of Ionic Dyes in Aqueous Solutions Using Magnetic 3D Reduced Graphene Oxide Aerogel Supported Nano Zero-Valent Iron

One-step Synthesis of Fe2O3 Nano-Rod Modified Reduced Graphene Oxide Composites for Effective Cr(vi) Removal: Removal Capability and Mechanism

Enhanced adsorption-coupled reduction of hexavalent chromium by 2D poly(m-phenylenediamine)-functionalized reduction graphene oxide

Enhanced simultaneous removal of direct red 81 and bisphenol A from aqueous media by coupling nano zero-valent iron (nZVI) particles with graphene oxide and copper: Isotherm and kinetic adsorption studies

Removal of Polybrominated Diphenyl Ethers by Biomass Carbon-Supported Nanoscale Zerovalent Iron Particles: Influencing Factors, Kinetics, and Mechanism.