Abstract:This paper presents the design of a strain-sensitive, dual ball-shaped tunable zone (DBT) taper structure for light intensity modulation. Unlike conventional tapered optical fibers, the DBT incorporates a central light field modulation zone within the taper. By precisely controlling the fusion parameters between single-mode fiber (SMF) and polarization-maintaining fiber (PMF), the ellipticity of the modulation zone can be finely adjusted, thereby optimizing spectral characteristics. Theoretical analysis based on polarization mode interference (PMI) coupling confirms that the DBT structure achieves a more uniform spectral response. In cantilever beam strain tests, the DBT exhibits high sensitivity and a highly linear intensity–strain response (R2 = 0.99), with orthogonal linear polarization mode interference yielding sensitivities of 0.049 dB/με and 0.023 dB/με over the 0–244.33 με strain range. Leveraging the DBT's light intensity sensitivity, a temperature-compensated intensity difference and ratio calculation method is proposed, effectively minimizing the influence of light source fluctuations on sensor performance and enabling high-precision strain measurements with errors as low as ±6 με under minor temperature variations. The DBT fiber device, combined with this innovative demodulation technique, is particularly suitable for precision optical sensing applications. The DBT structure, combined with the novel demodulation method, is particularly well-suited for high-precision and stable measurements in industrial monitoring, aerospace, civil engineering, and precision instruments for micro-deformation sensing.

Investigation of strain-induced effects on microwave signals from an PM-EDF based short cavity DBR laser

Investigation of Axial Strain Effects on Microwave Signals from a PM-EDF Short Cavity DBR Laser for Sensing Applications

On the Propagation and Pulsation of Portevin-Le Chatelier Deformation Bands: an Experimental Study with Digital Speckle Pattern Metrology

Frequency Difference Distribution on Cross Section of Nd:YAG Microchip Laser Force Sensors

Field/stress Tunable Behaviour of Composites Containing the Combined Current-Modulation Annealed Ferromagnetic Microwires

A Parametric Study of R-M Transition Laser and Recombination Laser in Strontium Ions

High-Resolution Strain Fiber Laser-Sensor Based on Core-Offset Mach-Zehnder Interferometer

Theoretical investigation of piezo-optic effect in photonic crystal nanocavity for nanostrain detection

Experimental Research on the Stability and the Multi-Longitudinal Mode Interference of Bidirectional Outputs of Ld-Pumped Solid-State Ring Laser

Strain Sensing in Cantilever Beams Using a Tapered PMF with Embedded Optical Modulation Region

Narrow Linewidth Half-Open-Cavity Random Laser Assisted by a Three-Grating Ring Resonator for Strain Detection

Research on strain sensing based on passively mode-locked fiber laser using saturable absorber

Multilongitudinal Mode Fiber Laser for Strain Measurement

EDF sigma laser using double-pass cascaded-chirped long-period fiber grating with birefringence compensation effect and its application for strain measurement

Self-curable Solid-State Elastic Dye Lasers Capable of Mechanical Stress Probing.

Strain Induced Exciton Fine-Structure Splitting and Shift in Bent ZnO Microwires

Effects of molecular vibration on the formation of transient defects during high-power UV laser excitation

Molecular Dynamics Simulation of Thermal and Thermomechanical Phenomena in Picosecond Laser Material Interaction

Effects of a Prestrained InGaN Interlayer on the Emission Properties of InGaN/GaN Multiple Quantum Wells in a Laser Diode Structure

Investigation of Thermomechanical Stress Characteristics in High-Power 808-Nm AlGaAs/GaAs Laser Diode Bars