Abstract:At present, the degree of industrialization in China is deepening, and various types of production equipment appear. However, during the startup and operation of mechanical equipment, fracture and wear will occur due to various factors. Therefore, once the mechanical equipment fails, it must be diagnosed as soon as possible to avoid serious economic losses and casualties. Rotating machinery is an important power device, so it is necessary to regularly detect and monitor equipment signals to avoid the consequences of wrong control methods. In this study, the fault diagnosis of rotating machine based on adaptive vibration signal processing is studied under the safe environmental conditions. The fault diagnosis process of rotating machinery is to first collect vibration signals, then process signal noise reduction, and then extract fault characteristic signals to further identify and classify fault status and diagnose fault degree. This study briefly introduces several rotating machinery vibration signal processing methods and identifies the fault state of the rotating machine based on the high-order cumulant. By building a DDS fault diagnosis test bench, the chaotic particle swarm parameter optimization algorithm is used to calculate the accurate stochastic resonance parameters. After noise processing, the high-frequency part is significantly reduced. The results show that, after stochastic resonance wavelet decomposition and denoising processing, the number of intrinsic functions can be significantly reduced, the fault frequency can be increased, the high-frequency noise can be reduced, and the fault analysis accuracy can be improved. We identify the fault state of rotating machinery based on the high-order cumulant, train the four states of the bearing, and compare the four types of faults, no fault, inner ring fault, rolling element fault, and outer ring fault through the comparison of the actual test set and the predicted test set. It is concluded that the rotating machinery fault belongs to the rolling element fault and the identification accuracy rate is 95%. Finally, based on the LMD morphological filtering, the rotating machinery fault diagnosis is carried out, and the feature extraction is carried out based on the LMD algorithm to decompose the bearing fault signal. Finally, the result after the morphological filtering and LMD decomposition and extraction can avoid noise interference.

Fault Diagnosis of Rotating Machineries and its Development Trend

Application of fault diagnosis technologies in coal mine machinery

Fault Diagnosis of Rotating Machinery Based on an Improved Support Vector Machines Model

A Review of Fault Diagnosis Methods for Rotating Machinery Using Infrared Thermography

Survey of Fault Predication Methods for Rotating Machinery

Fault Diagnosis for Rotating Machinery: A Method based on Image Processing

Fault Diagnosis of Rotating Machinery: A Review and Bibliometric Analysis

Deep Learning-Based Intelligent Fault Diagnosis Methods Toward Rotating Machinery

A Survey on Fault Diagnosis of Rotating Machinery Based on Machine Learning

An Embedded Fault Diagnosis System for Rotating Machinery

Rotating Machinery Fault Diagnosis Based on Adaptive Vibration Signal Processing under Safety Environment Conditions

Fault Identification of Rotor Machine Based on Optimized Method

An Approach to Performance Assessment and Fault Diagnosis for Rotating Machinery Equipment.

Trends in Fault Diagnosis for Electrical Machines: A Review of Diagnostic Techniques

A Review of Modeling and Diagnostic Techniques for Eccentricity Fault in Electric Machines

Rotating Machine Fault Diagnostics Using Vibration and Acoustic Emission Sensors

Rotating Machinery Fault Diagnosis Based on Improved Multiscale Amplitude-Aware Permutation Entropy and Multiclass Relevance Vector Machine

A fault diagnosis method for rotating machinery based on improved variational mode decomposition and a hybrid artificial sheep algorithm

Improved High Resolution Estimation Approach for Rotor Fault Diagnosis

Fault Diagnosis Based on Multi-channel Vibration Signal for Port Machine Trolley Wheel Bearings

Fault Diagnosis Approach for Rotating Machinery Based on Feature Importance Ranking and Selection