Abstract:Purification of wastewater before it is discharged into the aquatic environment is important in order to prevent pollution of clean water. This study investigated the applicability of functionalized multi-walled carbon nanotubes (MWCNTs) decorated with gold-iron oxide nanoparticles for the adsorptive removal of Pb2+ from synthetic wastewater. CNTs were commercially obtained and functionalized with a mixture of H2SO4/HNO3 acids. The CNTs were coated with gold-iron oxide nanoparticles, to enhance the adsorption of heavy metals. The gold-iron oxide nanoparticles were synthesized by reacting green tea leaf extract with iron chloride (FeCl2) and gold (III) chloride (HAuCl4) precursors. The composite was cross-linked using N, N-dimethylformadide (DMF). The adsorbents were characterized using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) to assess their surface morphology, Fourier transform infrared (FTIR) spectroscopy to identify the functional groups present, X-ray diffraction (XRD) to ascertain the crystallographic structure of the green adsorbent and Raman spectroscopy to determine the sample purity. SEM results showed highly agglomerated and polydispersed nanoparticles, owing to the presence of phytochemicals in the tea extract and magnetic interaction between the individual particles indicating the successful synthesis of Au/Fe3O4 adsorbent. Furthermore, an increase in the amount of Pb2+ removed per unit mass (qe) of adsorbent from 1.233 to 7.266 mg‧g-1 at 298 K was observed. A high sorption capacity was noticed for MWCNT-Au/Fe3O4 as compared to the MWCNT-COOH. The Pb2+ removal percentage increased from 50% to 78% with an increase in MWCNT-Au/Fe3O4 dosage from 0.02 g to 0.1 g. Adsorption isotherm data fitted well to the Freundlich and Langmuir isotherm models for MWCNT-COOH and MWCNT-Au/Fe3O4 adsorbents and the rate of Pb(II) adsorption by MWCNT-Au/Fe3O4 encountered an increase with increasing solution temperature and followed the pseudo-second-order model. The synthesized MWCNT-Au/Fe3O4 has good potential in removing heavy metals from wastewater.

Removal of heavy metals from industrial wastewaters using amine-functionalized nanoporous carbon as a novel sorbent

A new nano-sorbent for fast and efficient removal of heavy metals from aqueous solutions based on modification of magnetic mesoporous silica nanospheres

Al nanoparticles coated with polyaniline and functionalized modified multi-walled carbon nanotubes (MWCNT) for removal of Ni2+ and Zn2+ from a simulated industrial effluent

Selected Heavy Metals Removal From Electroplating Wastewater by Purified and Polyhydroxylbutyrate Functionalized Carbon Nanotubes Adsorbents

Facile adsorption-electroflotation method for the removal of heavy metal ions from water using carbon nanomaterials

Magnetic Multiwall Carbon Nanotube Decorated with Novel Functionalities: Synthesis and Application as Adsorbents for Lead Removal from Aqueous Medium

Highly Efficient Co-Removal of Heavy Metals in Wastewater from Chemical Oxygen Demand Testing Instrument by Cysteine-Functionalized Magnetic Nanoparticles

Fabrication of amino-functionalized silica hollow nanofibers for removal of heavy metal ions

Removal of Cu(II) from aqueous solutions by novel EDA-functionalized clay nanocomposite fabricated as nanoadsorbents

Facile Preparation of Multiphosphonic Acid Functionalised Multi-Walled Carbon Nanotubes for Enhanced Adsorption Properties for Heavy Metal Ions from Wastewaters

Study of Kinetics and the Working Mechanism of Silica-Coated Amino-Functionalized CoFe 2 O 4 Ferrite Nanoparticles to Treat Wastewater for Heavy Metals

Recent Progress on the Adsorption of Heavy Metal Ions Pb(II) and Cu(II) from Wastewater

Preparation of cast chitosan/polyether sulfone/Fe3O4 modified with mercapto and amine groups as a novel nanohybrid adsorbent for heavy metal removal from single and binary aqueous systems

Fabrication of Amino-Functionalized CoFe2O4-SiO2 Magnetic Composites and Their Adsorption Performance for Removal of Heavy Metal Ions from Water

Removal of Pb2+, CrT, and Hg2+ Ions from Aqueous Solutions Using Amino-Functionalized Magnetic Nanoparticles

Adsorbents from rice husk and shrimp shell for effective removal of heavy metals and reactive dyes in water

Preparation and characterization of nanoporous resin for heavy metal removal from aqueous solution

Synthesis and Adsorption Characteristics of Grafted Hydrazinyl Amine Magnetite-Chitosan for Ni(II) and Pb(II) Recovery

Removal of Pb2+ ions from synthetic wastewater using functionalized multi-walled carbon nanotubes decorated with green synthesized iron oxide–gold nanocomposite

Recent Developments in the Adsorption of Heavy Metal Ions from Aqueous Solutions Using Various Nanomaterials

Functionalized Metal-Organic Framework UIO-66 Nanocomposites with Ultra-High Stability for Efficient Adsorption of Heavy Metals: Kinetics, Thermodynamics, and Isothermal Adsorption