Abstract:Tongling and Nanling region is abundant in copper ore resources. From the 1980s, a large number of the sites of mining and smelting have been found in this region, the earliest of which could date back to the Erlitou period. Slags, furnace walls and other smelting remains from the sites of mining and smelting provided a good deal of archaeological materials for the study of the smelting technology of copper ore in ancient China. Slag samples collected from the smelting sites in Tongling and Nanling region, Anhui Province were analyzed by means of X-ray diffractometer (XRD), X-ray fluorescence spectrometer (XRF) and scanning electron microscope with energy-dispersive X-ray spectrometer (SEM-EDS) to understand the smelting process of copper ore. The results of XRD showed that the main phase compositions in the slag samples included fayalite, augite and hedenbergite, accompanied with quartz, cristobalite and magnetite, et al., which corresponded with the phase characteristics of copper smelting slag. From the contents of SiO2, CaO and Fe2O3, all slag samples were divided into three groups; Type I, Type II and Type III. The Type I was Iron-Silicon-Calcium slag, which was high in the contents of calcium, iron and silicon. The calcium contents of the Type I slag were much higher than those of the Type II and the Type slag. The Type II was iron-rich slag, and its Fe2O3 contents were higher than those of the Type I and the Type fill slags. The Type III was silicon-rich slag which was higher in SiO2 contents and lower in the calcium and iron contents. The Fe2O3 contents in all slags were higher than the common melting slags. Combined with the results of XRD, it was concluded that all slag samples are from the smelting process of copper ores. Calcium and iron levels in the Type I and Type II slags vary obviously and show the significant negative correlation, which indicated that calcium and iron in the slags was not controlled artificially and it is very possible that the calcium and iron in the slags were from the copper ores. Based on the contents of calcium and iron, it could be inferred that the early craftsmen in the Tongling and Nanling region didn't seem to understand the effects of calcium-bearing flux and iron-bearing flux and master the technology of matching ore of different kinds of copper ore. According to the results of SEM-EDS, the metal prills in the slags mainly included matte, copper and arsenic bronze, which showed that the smelting activities of copper and arsenic bronze coexisted in Tongling and Nanling area. The matte prills in the slags were mainly from different sites of mining and smelting, and the matte prills with the increasing copper content in turn were not extensively found in the same sites of mining and smelting. Therefore it was difficult to certify the existence of the matte smelting process, and it was not verified whether the smelting process of "copper sulfide ore-matte-copper" has been widely used in this area in the Pre-Qin Period. The matte prills in this work were possibly produced by the dead roasting process of copper sulfide ores or cosmelting process of the copper sulfide-oxide ore. On the basis of the arsenic bronze prills in the slag of Xiajiadun site, we could draw a conclusion perhaps that the ancient craftsman in this area mastered the cosmelting technology of arsenic copper in the Western Zhou period. The research results have an important significance for the study on the origin, the development and production mode of early smelting process in ancient China.

Silver Mines of the Northern Lake Titicaca Basin

The Escaramayu Complex: A Prehispanic Metallurgical Establishment in the South Andean Altiplano (Escara, Potosi, Bolivia), Ninth to Fifteenth Centuries AD

Heavy Metal Distribution in Rocks, Sediments, Mine Tailings, Leaching Experiments, and Groundwater from the Mineral de Pozos Historical Mining Site, North-Central Mexico

A Deposit of Silver Aquillas from the Site of Punrun Llacta de Soloco, Amazonas, Peru

Locations of Cinnabar-Mercury Occurrences in Peru: Implications for Pre-Contact Gold Production

The Textual Research of Copper and Silver Mining and Melting in Ancient Zhejiang,China and its Resource Significance and Environmental Risk

Characteristics and evolution of quartz-calcite-sulfide veins in the Nazca-Ocoña belt, Peru

The industrial heritage of two sacrifice zones and the geopolitics of memory in Northern Chile. The cases of Gatico and Ollagüe

Chronostratigraphy elucidates environmental changes in lacustrine sedimentation rates and metal accumulation

Spatio-temporal evaluation of metals and metalloids in the water of high Andean livestock micro-watersheds, Amazonas, Peru

Exhalative red-bed copper mineralization in travertine, Puna Plateau, northwest Argentina

Research of the Metallurgical Remains in the Xitugou Site at Dunhuang

Study on the Slags from the Sites of Mining and Smelting in Tongling and Nanling Region

Heavy Metal Enrichment Factors in Fluvial Sediments of an Amazonian Basin Impacted by Gold Mining

Economy of a Prehistoric Urban Context: Commodity and Labor Flow at Moche V Pampa Grande, Peru

Tracking the long-term limnological impacts of silver mining near Keno City (Yukon, subarctic Canada)

Overlooked Silver: Reassessing Ming–Qing Silver Supplies

Spatio-temporal trends of mercury levels in alluvial gold mining spoils areas monitored between rainy and dry seasons in the Peruvian Amazon

Aquatic community structure as sentinel of recent environmental changes unraveled from lake sedimentary records from the Atacama Desert, Chile

Geology and genesis of the Shalipayco evaporite-related Mississippi Valley-type Zn–Pb deposit, Central Peru: 3D geological modeling and C–O–S–Sr isotope constraints

The toxic legacy of artisanal and informal mining: XRF and gis analysis of soil contamination by Hg, Pb and As in the Secocha annex, Camaná, Peru