Abstract:The upcoming BIOMASS mission will provide P-band repeat-pass PolInSAR data from space for the improved mapping of global biomass. PolInSAR technique has been widely validated with the potential to invert forest height and estimate forest aboveground biomass (AGB). However, the robustness of PolInSAR-based AGB estimation across different sites still lacks full evaluation, especially for those with a varied forest type, heterogeneity (varied growth ratio between cover and height), and topographic relief. In this study, we concentrated on backscatter decomposition and forest height inversion, and developed a robust AGB estimation method that can be applied to different sites. Two dense and closed tropical forest sites (Paracou and Nouragues) and one open and heterogeneous boreal forest site (Krycklan) were selected as the study areas, and the corresponding airborne PolInSAR, LiDAR, and ground measured AGB data were used for validation and analysis. Results show that ground backscatter has the strongest correlation with AGB in boreal forests, but this correlation cannot be transferred to the tropical forests. Only canopy volume backscatter is almost free from topographic influence, and its relationship with AGB across three sites can be formulated using one exponential equation, producing the best estimation accuracy, with R 2 of 0.79 and RMSE of 61.5 tons/ha (relative RMSE of 20.0 %). Multi-baseline PolInSAR retrieved forest height with little bias in spite of the presence of temporal decorrelation. One power equation can be used to correlate PolInSAR forest height with AGB across three different sites, and LOO (leave-one-out) validation shows the R 2 of 0.85 and RMSE of 51.8 tons/ha (relative RMSE of 16.9 %). However, the RVoG-inverted PolInSAR FH was found to mainly represent the top forest height for open and heterogeneous forests, which means PolInSAR FH (forest height) lacks consideration for forest horizontal structure (e.g. forest density). In contrast, volume backscatter better captured forest density, and the proposed AGB model that combines PolInSAR FH and volume backscatter further improved the AGB estimation accuracy, especially for open forests: the plot-scale validation from all three sites shows R 2 was improved from 0.79 (volume backscatter) and 0.85 (PolInSAR FH) to 0.89, and RMSE decreased from 61.5 and 51.8 to 45.2 (relative RMSE of 14.7 %) tons/ha; for region-scale validation, R 2 was improved from 0.77 and 0.83 to 0.89, and RMSE decreased from 64.2 (relative RMSE of 39.0 %) and 54.5 (34.5 %) to 48.1 (29.4 %) tons/ha.

Estimating Forest Stand Height in Savannakhet, Lao PDR Using InSAR and Backscatter Methods with L-Band SAR Data

Forest Height Estimation Approach Combining P-Band and X-Band Interferometric SAR Data

Combining L-band Synthetic Aperture Radar backscatter and TanDEM-X canopy height for forest aboveground biomass estimation

Tomographic SAR Reconstruction for Forest Height Estimation

Forest Height Extraction from PolInSAR Image Using a Hybrid Method

Forest height retrieval using P-band airborne multi-baseline SAR data: A novel phase compensation method

ALOS PALSAR L-band polarimetric SAR data and in situ measurements for leaf area index assessment

Improving Forest Above-Ground Biomass Retrieval Using Multi-Sensor L- and C- Band SAR Data and Multi-Temporal Spaceborne LiDAR Data

Forest Aboveground Biomass and Forest Height Estimation Over a Sub-tropical Forest Using Machine Learning Algorithm and Synthetic Aperture Radar Data

3D-SAR Tomography and Machine Learning for High-Resolution Tree Height Estimation

Collaborative Estimation of Aboveground Forest Biomass Using P-Band and X-Band Interferometric Synthetic Aperture Radar Based on Feature Optimization

Forest parameter mapping based on lidar and SAR data

L-Band Synthetic Aperture Radar and Its Application for Forest Parameter Estimation, 1972 to 2024: A Review

Digital terrain, surface, and canopy height model generation with dual-baseline low-frequency InSAR over forest areas

Dual-Frequency Four-Stage Polarimetric SAR Interferometry for Forest Height Estimation

Forest Canopy Height Estimation Using Polarimetric Interferometric Synthetic Aperture Radar (PolInSAR) Technology Based on Full-Polarized ALOS/PALSAR Data

Estimation of leaf area index and crop height of sunflowers using multi-temporal optical and SAR satellite data

Enhancing Hyrcanian Forest Height and Aboveground Biomass Predictions: A Synergistic Use of TanDEM-X InSAR Coherence, Sentinel-1, and Sentinel-2 Data

Improved forest biomass estimation based on P-band repeat-pass PolInSAR data across different forest sites

Retrieval of Boreal Forest Heights Using an Improved Random Volume over Ground (RVoG) Model Based on Repeat-Pass Spaceborne Polarimetric SAR Interferometry: The Case Study of Saihanba, China

Combination of PolInSAR and LiDAR Techniques for Forest Height Estimation