Abstract:With the rapid development of global civil engineering construction, the intelligent structural system of civil engineering has evolved into one of the current global frontier disciplines. The research on the intelligent structural system of civil engineering and the current development situation are analyzed, and the main problems are combined. Giving reasonable suggestions is of great significance to the country's vigorous development of civil engineering intelligent structure system. This paper designs a new type of three-dimensional fiber grating sensor, including the design of the matrix model and the design of fiber grating strain gauges. This new sensor can effectively measure three-dimensional space, greatly expanding the application range of fiber grating sensors. In this paper, the design lighting area of each light pipe is taken as a unit. Each unit is set with 4 measuring points at the center and the edge. Each measuring point reads 3 illuminance value parameters and records the average value. Based on the results and comprehensive consideration of the short board situation, the research conclusions and recommendations are put forward. The foundation wall with aerated concrete blocks as the wall material can meet the requirements of 50% energy saving for exterior wall buildings with external decoration and internal insulation mortar. Compared with the benchmark wall of 50% energy saving of external wall buildings, the heat transfer coefficient is reduced by 50.1%, and the actual energy-saving effect of the wall can reach 75%. Meet the requirements of 65% for the energy-saving effect of exterior wall buildings. This paper considers economic parameters, such as the investment cost of building insulation materials, energy-saving income, and investment recovery period, and establishes a calculation model for analyzing the economics of insulation materials. Based on the heat transfer model of the composite wall and the fuel energy combustion equation, greenhouse gas is an established calculation model for CO2 and SO2 emissions. Studies have shown that when considering the room temperature insulation performance of insulation materials, the time required for the side of the concrete slab with glass fiber felt and aerogel insulation materials is about 2022 and 3363 s, respectively, indicating the fire resistance of aerogel insulation materials significantly better than fiberglass.

Research and Design of Installation Device for Building Exterior Wall Insulation Board

The research for new material and new technology of exterior walls thermal insulation

A Practical Shear Wall Layout Optimization Framework For The Design Of High-Rise Buildings

Size Optimization Design of Members for Shear Wall High-Rise Buildings

Design of a Mobile Manipulator for Curtain Wall Installation

The system design of external cladding installation robot

Mechanical performance of prefabricated lightweight steel-foamed ceramsite concrete wall panels: Experimental and theoretical investigations

Flexural Experiment and Design Method of Steel-Wire-Enhanced Insulation Panels

Research and Development of Civil Engineering Intelligent Structure System

Analysis on Reinforce Concrete Sandwich Wall-Panel Using Nonlinear Finite Element Method

Optimization design and experimental research on magnetic components for wall-climbing robot

Comparative Experiment on Adaptive Reuse of Wood Stud Partition Walls: Integrating the DfD Concept into Building Component Design

Building External Wall Thermal Insulation Construction Quality Safety Measures Analysis

The Development of EPS Exterior Wall Thermal Insulation System and Discussion of Engineering Quality

Design and dynamic analysis of a new type of extended intelligent folding window device

Investigation of the Thermal Performance of Lightweight Assembled Exterior Wall Panel (LAEWP) with Stud Connections

Weathering resistance of novel sustainable prefabricated thermal insulation wall

Preparation and Experimental Study on A New Type of Exterior Wall Putty

Study on the Performance of Active Embedded Steel Wire Knot Form in Silicone Graphene Composite Thermal Insulation Structure Integrated System

DESIGN METHOD OF DISCRETE CONNECTOR SYSTEM FOR SANDWICH THERMAL INSULATION WALL PANELS

Study on Thermal Performance Measurement and Construction of Passive Exterior Wall with Low Energy: Teaching and Laboratory Building of Shandong Jianzhu University