Abstract:This paper investigates the optimization of an unmanned aerial vehicle (UAV) network serving multiple downlink users equipped with single antennas. The network is enhanced by the deployment of either a passive reconfigurable intelligent surface (RIS) or an active RIS. The objective is to jointly design the UAV's trajectory and the low-bit, quantized, RIS-programmable coefficients to maximize the minimum user rate in a multi-user scenario. To address this optimization challenge, an alternating optimization framework is employed, leveraging the successive convex approximation (SCA) method. Specifically, for the UAV trajectory design, the original non-convex optimization problem is reformulated into an equivalent convex problem through the introduction of slack variables and appropriate approximations. On the other hand, for the RIS-programmable coefficient design, an efficient algorithm is developed using a penalty-based approximation approach. To solve the problems with the proposed optimization, high-performance optimization tools such as CVX are utilized, despite their associated high time complexity. To mitigate this complexity, a low-complexity algorithm is specifically tailored for the optimization of passive RIS-programmable reflecting elements. This algorithm relies solely on closed-form expressions to generate improved feasible points, thereby reducing the computational burden while maintaining reasonable performance. Extensive simulations are created to validate the performance of the proposed algorithms. The results demonstrate that the active RIS-based approach outperforms the passive RIS-based approach. Additionally, for the passive RIS-based algorithms, the low-complexity variant achieves a reduced time complexity with a moderate loss in performance.

Learning from UAV Experimental Results for Performance Modeling of Reconfigurable Intelligent Surface Flying Platform

Active Reconfigurable Intelligent Surface Enhanced Secure and Energy-Efficient Communication of Jittering UAV

Reconfigurable Intelligent Surface Assisted UAV Communication: Joint Trajectory Design and Passive Beamforming

Performance Analysis of Aerial RIS Auxiliary mmWave Mobile Communications With UAV Fluctuation

Active Intelligent Reflecting Surface Assisted Secure Air-to-Ground Communication with UAV Jittering

Penalized Reinforcement Learning-Based Energy-Efficient UAV-RIS Assisted Maritime Uplink Communications Against Jamming

Joint Deployment and Resource Management for VLC-Enabled RISs-Assisted UAV Networks

Reconfigurable Intelligent Surface-Assisted mmWave multi-UAV Wireless Cellular Networks

Joint Trajectory and Passive Beamforming Design for Secure UAV Networks with RIS

Leveraging UAV-RIS Reflects to Improve the Security Performance of Wireless Network Systems

Reconfigurable Intelligent Surface Equipped UAV in Emergency Wireless Communications: A New Fading-Shadowing Model and Performance Analysis

A 3D Non-Stationary MIMO Channel Model for Reconfigurable Intelligent Surface Auxiliary UAV-to-Ground mmWave Communications

Reconfigurable Wireless Relaying With Multi-UAV-Carried Intelligent Reflecting Surfaces

Intelligent Reflecting Surface-Enhanced UAV Communications: Advances, Challenges, and Prospects

UAV-Assisted Communications With RIS: A Shadowing-Based Stochastic Analysis

On the Performance of the UAV RIS-Assisted Dual-Hop PLC-RF Systems

Low-Resolution Optimization for an Unmanned Aerial Vehicle Communication Network under a Passive Reconfigurable Intelligent Surface and Active Reconfigurable Intelligent Surface

UAV Jitter May Have Merit: A Fading Analysis in Air-to-Sea Two Ray Channels

RIS-Assisted UAV-Enabled Wireless Powered Communications: System Modeling and Optimization

Modeling and Analysis of Data Harvesting Architecture based on Unmanned Aerial Vehicles

Robust Secure UAV Communications with the Aid of Reconfigurable Intelligent Surfaces