Abstract:Cr(VI) as a toxic heavy metal can endanger human physical and mental health. The adsorption method has been widely used for Cr(VI) removal due to its advantages of cost-effectiveness and simplicity of operation. However, the key to Cr(VI) removal by adsorption lies in the construction of adsorption active sites. In this study, Fe 3 O 4 @COF-MT@PPy magnetic composites were prepared by the Schiff base method and in situ polymerisation to construct adsorbents with high specific surface area and abundant amino active sites for the removal of Cr(VI) from wastewater. The TEM and BET results showed that PPy was successfully encapsulated on the Fe 3 O 4 @COF-MT material, and the COF layer provided sites for the polymerisation of PPy, which resulted in a large specific surface area (400.93 m 2 /g) for Fe 3 O 4 @COF-MT@PPy, thus providing more adsorption sites. The VSM results showed that the prepared composites have good magnetic properties (13.8 emu/g) and are easy to separate from aqueous solutions. Encouragingly, the Fe 3 O 4 @COF-MT@PPy composites showed excellent adsorption performance for Cr(VI) in aqueous solution. The maximum adsorption capacity of the material for Cr(VI) was 429.18 mg/g at 298 K, which was much higher than Fe 3 O 4 @COF-MT with Fe 3 O 4 @PPy. Adsorption kinetics and isotherm analyses showed that the adsorption process was more in line with the pseudo-second-order and Langmuir models. The Fe 3 O 4 @COF-MT@PPy composites were able to maintain high adsorption capacity of Cr(VI) after five regenerations, which showed good reusability. In addition, interfering ion experiments demonstrated the selective adsorption of Fe 3 O 4 @COF-MT@PPy on Cr(VI). Using XPS for the analysis, it can be speculated that the adsorption mechanism is due to the abundant amino groups on the surface of the adsorbent firstly exerting electrostatic attraction and ion-exchange effect on the anion Cr(VI), and then the protonated amino groups reduce part of the Cr(VI) to Cr(III), and finally adsorb the Cr(III) on the surface of the material by chelation. Therefore, the recyclable Fe 3 O 4 @COF-MT@PPy has a good potential for adsorption of Cr-containing wastewater.

Preparation of a polyelectrolyte-coated magnetic attapulgite composite for the adsorption of precious metals

Highly Selective Adsorption for Palladium Removal by Impregnation Preparation of a Macroporous N-based Functional Composite

Preparation of EDTA-modified Magnetic Attapulgite Chitosan Gel Bead Adsorbent for the Removal of Cu(II), Pb(II), and Ni(II).

Novel environmental-friendly nano-composite magnetic attapulgite functionalized by chitosan and EDTA for cadmium (II) removal

Magnetic Fe3O4/attapulgite hybrids for Cd(II) adsorption: Performance, mechanism and recovery

Fe3O4 Nanoparticles Functionalized with Poly(ethylene Glycol) for the Selective Separation and Enrichment of Au(iii)

Design of Magnetic Nanoparticles with High Magnetic Separation Efficiencies and Durability for Cu2+ Adsorption

Preparation of Attapulgite/CoFe2O4 Magnetic Composites for Efficient Adsorption of Tannic Acid from Aqueous Solution

Adsorption Properties of Fe_3O_4/Poly(acrylate-methyl-ester) Magnetic Microspheres for Metal Ions

Efficient Adsorption of Cu(II), Pb(II) and Ni(II) from Waste Water by PANI@APTS-magnetic Attapulgite Composites

Magnetic phosphorylated chitosan composite as a novel adsorbent for highly effective and selective capture of lead from aqueous solution

Synthesis of novel magnetic pitch-based hypercrosslinked polymers as adsorbents for effective recovery of Ag + with high selectivity

Preparation and adsorption of Cd2+ of attapulgite modified by AMPS

Recyclable Fe3O4@UiO-66-PDA core–shell nanomaterials for extensive metal ion adsorption: Batch experiments and theoretical analysis

Magnetic Core@Shell Fe 3 O 4 @Polypyrrole@Sodium Dodecyl Sulfate Composite for Enhanced Selective Removal of Dyestuffs and Heavy Metal Ions from Complex Wastewater

Dispersive solid phase extraction of precious metal ions from electronic wastes using magnetic multiwalled carbon nanotubes composite

Fabrication of Kaolin Loaded Chitosan Hybrid Nanofibers for Recovery of Precious Palladium Cations from Aqueous Solution

Selective adsorption of heavy metals from water by a hyper-branched magnetic composite material: Characterization, performance, and mechanism

Adsorption and enrichment of low-concentration heavy metal complexes by retractable claws made of polyelectrolyte brushes

Structural selective regulation of Fe3O4@C composite as adsorbent for removing different organic pollutants

Effective adsorption and removal of Cr(VI) from wastewater using magnetic composites prepared by synergistic effect of polypyrrole and covalent organic frameworks