Abstract:Traditional electric power systems are designed in large part to utilize large baseload power plants, with limited ability to rapidly ramp output or reduce output below a certain level. The increase in demand variability created by intermittent sources such as photovoltaic (PV) presents new challenges to increase system flexibility. This paper aims to investigate and emphasize the importance of the grid-connected PV system regarding the intermittent nature of renewable generation, and the characterization of PV generation with regard to grid code compliance. The investigation was conducted to critically review the literature on expected potential problems associated with high penetration levels and islanding prevention methods of grid tied PV. According to the survey, PV grid connection inverters have fairly good performance. They have high conversion efficiency and power factor exceeding 90% for wide operating range, while maintaining current harmonics THD less than 5%. Numerous large-scale projects are currently being commissioned, with more planned for the near future. Prices of both PV and balance of system components (BOS) are decreasing which will lead to further increase in use. The technical requirements from the utility power system side need to be satisfied to ensure the safety of the PV installer and the reliability of the utility grid. Identifying the technical requirements for grid interconnection and solving the interconnect problems such as islanding detection, harmonic distortion requirements and electromagnetic interference are therefore very important issues for widespread application of PV systems. The control circuit also provides sufficient control and protection functions like maximum power tracking, inverter current control and power factor control. Reliability, life span and maintenance needs should be certified through the long-term operation of PV system. Further reduction of cost, size and weight is required for more utilization of PV systems. Using PV inverters with a variable power factor at high penetration levels may increase the number of balanced conditions and subsequently increase the probability of islanding. It is strongly recommended that PV inverters should be operated at unity power factor. (C) 2009 Elsevier Ltd. All rights reserved.

PV Systems Installed in Marine Vessels: Technologies and Specifications

Application of Solar Photovoltaic Power Generation System in Maritime Vessels and Development of Maritime Tourism

Power Quality Analysis for Ship-Photovoltaic Power System: A Case Study

Modelling and solar PV contribution to marine electric propulsion

Comprehensive analysis of offshore wind-photovoltaic hybrid systems: unveiling state-of-the-art autonomous components for maritime applications

Study of Photovoltaic Double-Skin Façade Windows in Passenger Ships

Optimal sizing of hybrid PV/diesel/battery in ship power system

Technical design aspects of harbour area grid for shore to ship power: State of the art and future solutions

Status and Challenges of Marine Current Turbines: A Global Review

The design of power management system for solar ship

Performance of photovoltaic systems supported by twin-hull floating structures in offshore and coastal regions

Experimental Research of the Impact of Ship’s Rolling on the Performance of PV Panels

Modeling and Simulation of Marine PV Inverter System Based on MPPT Algorithm

A Novel BEM for the Hydrodynamic Analysis of Twin-Hull Vessels with Application to Solar Ships

Grid-Connected Photovoltaic Power Systems: Technical and Potential Problems-A Review

Review of Recent Offshore Photovoltaics Development

A Comprehensive Review of Shipboard Power Systems with New Energy Sources

Comparative study based on techno-economics analysis of different shipboard microgrid systems comprising PV/wind/fuel cell/battery/diesel generator with two battery technologies: A step toward green maritime transportation

Experimental characterization of a PEM fuel cell for marine power generation

Ship electric propulsion systems transformers: specific aspects of development

Hybrid energy saving performance of translucent CdTe photovoltaic window on small ship under sailing condition