Abstract:AlGaN-based deep-ultraviolet (DUV) LEDs could realize higher optical power output when adopting a p-AlGaN contact layer instead of a p-GaN contact layer. However, this new type DUV LEDs exhibit poor reliability. Thus, this study thoroughly investigates the degradation behaviors of AlGaN-based DUV LEDs with a p-AlGaN contact layer through different aging tests, including single thermal stress, single electrical stress with air-cooling, single electrical stress, and thermoelectric complex stress. It can be found that both high temperature and large working current play crucial roles in accelerating the degradation of optoelectronic properties of the DUV LEDs, and the single high thermal stress without electrical stress can also bring obvious performance degradation to the DUV LEDs, which is a significantly different finding from previous studies. This is because thermal stress on DUV LED could bring some metal electrode elements entering the p-AlGaN layer. Thus, the degradation of optical and electrical properties under the thermal and electrical stress could be not only attributed to the degradation of the device's ohmic contacts, but also due to the metal electrode elements entering the p-AlGaN layer through thermal diffusion, leading to the generation of tunneling current and the generation of defects within or around the active region. Despite that the peak wavelengths of the DUV LEDs remained stable, the turn-on voltage and series resistance increased. Particularly worth mentioning is that the value of the optical power degradation under thermoelectric conditions is larger than the sum of the single thermal and single electrical optical power degradation, which is a result of the mutual reinforcement of thermal and electrical stresses to exacerbate the defect generation and ohmic contact degradation. Based on the study above, preparing p-AlGaN layers with hyperfine gradient aluminum fractions and reducing the junction temperature may help to improve the reliability of AlGaN-based DUV LEDs with the p-AlGaN contact layer.

Heat Dissipation Enhancement of High-Power Deep-Ultraviolet LEDs Through Plated Copper on Thick Film Diamond Substrates

Enhanced Optical–Thermal Performances of High-Power LED by Plated Copper on Thick Film Ceramic Substrate

Thermal enhancement of optical-thermal-electrical isolation package structure for UVA LEDs

Heat Dissipation Enhancement of High-Power LEDs Through Compact Ceramic Substrate Integrated With Microchannel

Thermal behavior of AlGaN-based deep-UV LEDs

High Thermal Conductive AlN Substrate for Heat Dissipation in High-Power LEDs

Enhancement of the light extraction characteristics and wide-angle emissive behavior of deep-ultraviolet flip-chip light-emitting diodes by using optimized optical films

Study on Thermal Conductivity of Micro-arc Alumina Substrate for High Power LED

Thermal Management of Micro-Scale Inorganic Light-Emittng Diodes on an Orthotropic Substrate for Biointegrated Applications

In-depth Investigation of Deep Ultraviolet MicroLED Geometry for Enhanced Performance

Improved light extraction efficiency of AlGaN DUV light emitting diodes using Al/MgF 2 -based highly reflective film

Enhanced light extraction efficiency for the inclined-sidewall-shaped AlGaN-based DUV LED by using an omni-directional reflector with a thin hybrid dielectric layer

Enhanced external quantum efficiencies of AlGaN-based deep-UV LEDs using reflective passivation layer

Heat Dissipation for LED Lighting: Vapor Chamber Substrate Printed Circuit Board

Study on the Degradation Performance of AlGaN-Based Deep Ultraviolet LEDs under Thermal and Electrical Stress

Diamond single crystal-polycrystalline hybrid microchannel heat sink strategy for directional heat dissipation of hot spots in power devices

Enhancement of Heat Dissipation in Ultraviolet Light‐Emitting Diodes by a Vertically Oriented Graphene Nanowall Buffer Layer

Impacts of p-GaN layer thickness on the photoelectric and thermal performance of AlGaN-based deep-UV LEDs

Influence on temperature distribution of COB deep UV LED due to different packaging density and substrate type

Thermal Simulations of a UV LED Module with Nanosilver Sintered Die Attach Process on Graphene-Coated Copper Substrates

Surface treatment of an applied novel all-diamond microchannel heat sink for heat transfer performance enhancement