Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Microstructural and mechanical properties of the plantain fiber/local clay filled hybrid polystyrene composites

Morphological and Thermal Properties of Polystyrene Composite Reinforced with Biochar from Plantain Stalk Fibre

Impact of filler type and proportion on the performance of rubberized coconut fiber-polystyrene composites

Effect of hybridization of novel African teff and snake grass fibers reinforced epoxy composites with bio castor seed shell filler: Experimental investigation

Banana and plantain fiber-reinforced polymer composites

Exploring the impact of hybridization on green composites: pineapple leaf and sisal fiber reinforcement using poly(furfuryl alcohol) bioresin

Mechanical, microstructure, and dynamic mechanical analysis of nano-shell and plant fiber hybrid biocomposite

Statistical analysis of the substitution of inorganic fibers and fillers with vegetable fibers and fillers in polystyrene composites

Influence of stacking sequence on mechanical properties of areca-kenaf fiber- reinforced polymer hybrid composite

A study of the mechanical, thermal and rheological properties of sisal fiber-reinforced polylactic acid bio-composites with tributyl 2-acetylcitrate as a plasticizer

Influence of layering variation with addition of bio-fillers on mechanical and thermal performances of hybrid polyester composites

Development of epoxy-based sandwich composite panel with hollow glass microspheres/clay hybrid core and banana fiber facesheet for structural applications

Biocomposites based on polypropylene and Agave fibers (Agave Americana L): investigation on physical, thermal and mechanical properties

Evaluation of the Physical and Mechanical Properties of Short Entada mannii-Glass Fiber Hybrid Composites

Interactive Influence of Biofiber Composition and Elastomer on Physico-Mechanical Properties of PLA Green Composites

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Physical, Mechanical and Morphological Properties of Sugar Palm Fiber Reinforced Polylactic Acid Composites

Influence of fish-scale powder addition and stacking order on mechanical and thermal properties of hybrid kenaf/glass polyester composites

A polymer resin matrix modified by coconut filler and its effect on structural behavior of glass fiber-reinforced polymer composites

Effect of alumina fillers on physical and mechanical properties of luffa/groundnut shell natural fiber reinforced polymer composites

Hybrid polymer composites of Terminalia chebula filler reinforced thermal and mechanical characterization of bagasse/tamarind seed