The simultaneous effect of a fairing tower and increased blade flexibility on a downwind mounted rotor

M. Reiso,M. Muskulus
DOI: https://doi.org/10.1063/1.4803749
IF: 2.847
2013-05-01
Journal of Renewable and Sustainable Energy
Abstract:This is a parametric study on how blade and tower loads for a prototypical downwind offshore wind turbine are affected as the tower geometry and blade properties are changed. Downwind turbines have the potential to reduce the cost of energy, as blades can be more flexible and lighter, but the tower shadow induces additional structural vibrations. In order to reduce the latter, a fairing around the tower has been introduced. The length of the fairing is varied, adjusting the rotor overhang accordingly. Additionally, the blade weight and stiffness are adjusted. The blade and tower fatigue loads are, thereby, significantly decreased. In the first case, a maximum reduction of 8% and 28% (for the blade root bending and tower bottom moment, respectively) was achieved, compared to a downwind version of the National Renewable Energy Laboratory (NREL) 5 MW reference wind turbine on a monopile tower. Using softer and lighter blades resulted in loads even lower than for the conventional upwind rotor of the NREL turbine, up to 5% and 13% less for the blade and tower fatigue loads, respectively. The increased overhang increased the mean tower bending moments, suggesting that an optimal downwind turbine needs to be designed with a compromise between these fatigue and ultimate loads. The power production stayed approximately the same as that of a conventional wind turbine or was slightly higher.
energy & fuels,green & sustainable science & technology
What problem does this paper attempt to address?