Latest Advances in Modified/Functionalized Carbon Nanotube- Based Gas Sensors

Enid Contés-de Jesús,Jing Li,Carlos R. Cabrera,Enid Conts-de,Carlos R.

DOI: https://doi.org/10.5772/52173

2013-05-09

Abstract:Latest Advances in Modified/Functionalized Carbon Nanotube- Based Gas Sensors | InTechOpen, Published on: 2013-05-09. Authors: Enid Contés-de Jesús, Jing Li and Carlos R. Cabrera

What problem does this paper attempt to address?

Preparation of CNTs/PANi core/shell-structured nanowires and improvement of sensitivity of chemical sensors

Xingfa Ma,Shujuan Niu,Mingjun Gao,Xiaochun He,Guang Li

DOI: https://doi.org/10.4028/www.scientific.net/MSF.686.438

2011-01-01

Abstract:In order to improve the sensing-properties of carbon nanotube based composite for potential applications in chemical sensors, CNTs/PANi core/shell-structured nanowires were prepared with in-situ polymerization approach. A series of characterizations was carried out by TEM (transmission electron microscopy), the Fourier-Transform Infrared (FTIR) spectra, and so on. A chemical prototype sensor was constructed based on CNTs/PANi core/shell-structured nanowires and interdigital-structured electrodes on flexible polymer substrate. The gas-sensing behaviors of the sensor to some gases operating at room temperature were examined. Results showed that the sensitivity of CNTs/PANi core/shell-structured nanowires was increased dramaticly compared with pure carbon nanotube materials. This provides a carbon nanotube based composite materials with enhanced gas-sensitivity, which would have potential applications in some chemical sensors.
Nanocarbon-Based Gas Sensors: Progress and Challenges

Shun Mao,Ganhua Lu,Junhong Chen

DOI: https://doi.org/10.1039/c3ta13823b

IF: 11.9

2014-01-01

Journal of Materials Chemistry A

Abstract:Novel materials based on nanocarbons (e.g., carbon nanotubes (CNTs) and graphene) have attracted much attention as sensing elements in miniaturized, low-power consumption, and ubiquitous electronic gas sensors due to their unique structural and electronic properties. This highlight discusses some recent progress in the research on nanocarbon-based electronic gas sensors, including CNTs, graphene, and their composites (i.e., nanocarbon-nanocrystal hybrids), identifies the technological barriers that impair their commercialization, and presents an outlook of the challenges and opportunities for the use of nanocarbon-based materials in next generation gas sensors.
Research Advances of Carbon Nanotube-based Gas Sensors

王仁慧,牛婉婷,杨昊,潘敏

DOI: https://doi.org/10.3321/j.issn:1000-7857.2009.21.023

2009-01-01

Abstract:Carbon nanatubes (CNTs) have potential applications in the selective and rapid detection of various gas species due to their special electrical, mechanical, physical, chemical performance . In recent years, researches on the application of CNTs in gas sensing have made a great progress. CNTs-based gas sensors enjoy many good features, such as small size, the capability of working at room temperature, high sensitivity, and short response time. This paper reviews the recent progress on the development of intrinsic CNTs-based gas sensors, the functionalization of CNTs-based gas sensors and the applications in human breath, with the focus on how to improve the sensing performance (sensitivity,selectivity ,response time and reproducibility) and increase the gas species of detecting through the rational functionalization of CNTs with different materials (organic polymers ,metals and metal oxides) .The new desorption method besides heating and ultraviolet radiation, the selective detection for specific gas in the complex surroundings, the technology of CNTs-based gas sensor arrays, and the implementation of commercial gas sensor devices will be issues for future reseaches.
Carbon Materials for Gas and Bio-Sensing Applications Beyond Graphene

DOI: https://doi.org/10.21741/9781644901175-2

2021-02-15

Abstract:The development of technology in the area of material science and nanotechnology is a worldwide concern to researchers for generating a substance by synthesizing nanoparticles with required properties. Carbonaceous materials have gained numerous interests because of their direct electron or charge transfer capacity between active site reception and functionalized nanoparticles without involvement of a mediator. However, among all existing materials, carbon nanotubes have been proven to elite beyond graphene. Carbon nanotubes (CNTs) possess extraordinary electrochemical biosensing and gas sensing due to their specific properties. This encourages researchers to gain new ideas about construction and development of immunosensors, genosensors, enzymatic biosensors and specific gas sensors based on above nanoparticles. Qualification of working electrode via incorporation of two or more of these nanoparticles gives enhanced stability, better sensitivity and functionality to the sensor. This chapter reviews basic information about sensors, their types, functionalization, fabrication mechanisms and applications for future prospective.
Gas sensors using carbon nanomaterials: A review

Eduard Llobet

DOI: https://doi.org/10.1016/j.snb.2012.11.014

2013-03-01

Abstract:Carbon nanomaterials have been attracting a great deal of research interest in the last few years. Their unique electrical, optical and mechanical properties make them very interesting for developing the new generation of miniaturised, low-power, ubiquitous sensors. In the particular case of gas sensing, some carbon nanomaterials such as nanofibres, nanotubes and graphene are threatening the dominance position of other well established (nano)materials, yet the commercial exploitation of carbon nanomaterials is still a way off. This paper reviews the state of the art for electrical gas sensors employing carbon nanomaterials, identifies the bottlenecks that impair their commercialisation and also some recent breakthroughs. Finally an outlook in which challenges and opportunities are identified is given.
Recent Advances in Nanostructured Materials for Application as Gas Sensors

Pravas Kumar Panigrahi,Basavaiah Chandu,Nagaprasad Puvvada

DOI: https://doi.org/10.1021/acsomega.3c06533

IF: 4.1

2024-01-30

ACS Omega

Abstract:Many different industries, including the pharmaceutical, medical engineering, clinical diagnostic, public safety, and food monitoring industries, use gas sensors. The inherent qualities of nanomaterials, such as their capacity to chemically or physically adsorb gas, and their great ratio of surface to volume make them excellent candidates for use in gas sensing technology. Additionally, the nanomaterial-based gas sensors have excellent selectivity, reproducibility, durability, and...

chemistry, multidisciplinary
Carbon nano materials as gas sensors

Hanan Elhaes,Ahmed Fakhry,Medhat Ibrahim

DOI: https://doi.org/10.1016/j.matpr.2016.04.166

2016-01-01

Materials Today: Proceedings

Abstract:The present paper reports the applications of carbon nano materials in the field of sensing with special interest toward gas sensing. The paper will report general introduction about carbon nano materials, then specify to some extent some applications of each type of carbon nano materials. Of course not all types will be included, but the following sections will be covered such that1.General introduction2. Carbon nano materials3. Gas Sensing with Carbon nanomaterials3-1. Carbon nanotubes3-2.Multi-walled carbon nanotubes3-3.Single-walled carbon nanotubes3-4. Carbon Fibers3-5. Grapheme and reduced grapheme oxide4. ConclusionAfter surveying these classes of materials and describing its role as gas sensor one can conclude the unique physical, chemical and morphological properties of carbon nano materials dedicating it as gas senor even if it applied itself and/or when it blended or fabricated with other materials.
Flexible Gas Sensors Based on Carbon Nanotube Hybrid Films: A Review

Xinguang Huang,Rui Pang,Mengdan Yang,Shipeng Zhang,Fengmei Guo,Jie Xu,Yingjiu Zhang,Anyuan Cao,Yuanyuan Shang

DOI: https://doi.org/10.1002/admt.202300616

IF: 6.8

2023-09-21

Advanced Materials Technologies

Abstract:Recent progresses in flexible gas sensors based on carbon nanotube (CNT) films are thoroughly summarized, including the introduction of preparation, compounds, performance, and applications. Different types of sensitive materials loaded on CNT films and their gas sensing mechanism, preparation method, and response are reviewed. The sensitivity, selectivity, and flexibility of flexible gas sensors based on CNT films are also discussed. Flexible gas sensors, which can detect gas markers from the human body and hazardous gases from the environment, are attracting tremendous attention recently. Carbon nanotube (CNT) films are explored for flexible gas sensors due to its sensing ability at room temperature, strong adsorption for foreign molecules, mechanical robustness, and remarkable flexibility, and providing nanoscale surfaces with large surface area for various functional materials, etc. In this paper, recent advances in flexible gas sensors based on CNT films are reviewed. It discusses various strategies to design the structure of flexible CNT films and improve flexibility/stretchability performance. It generalizes different types of sensitive materials loaded for detected gases and analyzes the sensing mechanism of CNT films, with interface interactions and synergistic effects leading to an improvement in gas sensing. In addition, it discusses the preparation of CNT self‐standing films and the use of flexible substrates in transformation and assembly, in order to enable CNT films with improved flexible properties. CNT films show remarkable response and flexibility to hazard or greenhouse gases, such as ammonia, nitrogen dioxide, hydrogen, nitric oxide, carbon dioxide, and others. Summary and perspectives toward the future development of flexible gas sensors based on CNT films are proposed.

materials science, multidisciplinary
Computational Design of Chemical Nanosensors: Metal Doped Carbon Nanotubes

J. M. García-Lastra,D. J. Mowbray,K. S. Thygesen,A. Rubio,K. W. Jacobsen

DOI: https://doi.org/10.48550/arXiv.1001.2538

2010-01-14

Mesoscale and Nanoscale Physics

Abstract:We use computational screening to systematically investigate the use of transition metal doped carbon nanotubes for chemical gas sensing. For a set of relevant target molecules (CO, NH3, H2S) and the main components of air (N2, O2, H2O), we calculate the binding energy and change in conductance upon adsorption on a metal atom occupying a vacancy of a (6,6) carbon nanotube. Based on these descriptors, we identify the most promising dopant candidates for detection of a given target molecule. From the fractional coverage of the metal sites in thermal equilibrium with air, we estimate the change in the nanotube resistance per doping site as a function of the target molecule concentration assuming charge transport in the diffusive regime. Our analysis points to Ni-doped nanotubes as candidates for CO sensors working under typical atmospheric conditions.
Toward Practical Gas Sensing with Rapid Recovery Semiconducting Carbon Nanotube Film Sensors

Liu Fangfang,Xiao Mengmeng,Ning Yongkai,Zhou Shaoyuan,He Jianping,Lin Yanxia,Zhang Zhiyong

DOI: https://doi.org/10.1007/s11432-021-3286-3

2022-01-01

Science China Information Sciences

Abstract:Nanomaterials have been considered as promising materials to construct highly sensitive and miniaturized gas sensors due to their high ratio of surface to volume, but almost all of the reported nanomaterials based resistive gas sensors are difficult to use in the practical system mainly owing to the long recovery time and non-equilibrium state at room temperature. Here, we demonstrate a gate assistant technology to realize the rapid recovery to an equilibrium state in semiconducting carbon nanotube(CNT) thin-film gas sensors and promote the CNT-based gas sensors to reach the practical application level. Specifically, we construct highly uniform gas sensors based on semiconducting solution-derived CNT film and accelerate the gas molecules desorption by applying a voltage on the back gate(substrate), which is named gate-assistant recovery technology. By combining the gate-assistant recovery technology and a modified concentration calculation method, highly reproducible detection systems have been realized by using a custom-built printed circuit board(PCB) based data acquisition circuits to execute a real-time rapid detection of H2 in the air at room temperature, and especially exhibits a record response time of 9 s and recovery time of 50 s under a resolution of 10 ppm, which outperformed previous low dimensional nanomaterials based portable H2 detection systems. The gate-assistant rapid recovery and related concentration calculation technologies are helpful to promote the nanomaterials-based gas sensors to practical application for highly sensitive online gas detection.
Carbon Nanotube Gas Sensor Based on Corona Discharge

Hui Guohua,Wu Lili,Pan Min,Chen Yuquan,Li Ting,Zhang Xiaobin

DOI: https://doi.org/10.1016/s1872-2040(07)60022-x

2006-01-01

Abstract:A novel gas sensor based on aligned carbon nanotubes (CNTs) was developed for gas detection at normal temperature and atmosphere pressure. Controlled DC power supply is gradually applied between anode (AAO of aligned carbon nanotubes film) and cathode (Al plate), and the experimental data are measured through detecting circuit, which consists of HITACHI oscilloscope and amperemeter. Different types of gases have particular breakdown voltages and discharge current, so it is possible to detect one gas or a gaseous mixture. The results show that carbon nanotubes gas sensor based on corona discharge is effective, convenient, and can be prepared easily. The gas sensor is practical due to its particular characteristics.
Special Issue "Advanced Nanomaterials Based Gas Sensors"

Xavier Vilanova

DOI: https://doi.org/10.3390/s20051373

2020-03-02

Abstract:During the last several years, according to the works published in research journals, many nanostructured materials have been tested as sensing materials for gas-sensing applications. This trend has been observed for both metal oxides as well as carbon-based nanomaterials. More recently, it has also been extended to other materials based on chalcogenides. The field of applications for these sensors is very wide, including air quality, industrial safety and medical diagnosis, using different transducing mechanisms. Therefore, in this Special Issue, we have put together recent advances in this area.
Fabrication of Carbon-Nanotube Sheet Based Hydrogen Sensor

Keyi YAN,Yuhki TOKU,Yasuyuki MORITA,Yang JU

DOI: https://doi.org/10.1299/jsmemp.2016.24.406

2016-01-01

The Proceedings of the Materials and processing conference

Abstract:Due to their high specific surface area and measurable change in conductance according to the chemical environment changes, carbon nanotubes (CNTs) have been proved to be an ideal material for next generation of gas sensor. However, before CNTs-based sensor can become a candidate for commercial implementation, there are still challenges including mass production of sensor arrays and improvement of sensor reproducibility. In this research, a high sensitivity CNT sheet-based gas sensor was fabricated, which can push forward the commercialization of CNT-based sensor. By controlling the reaction conditions during chemical vapor deposition (CVD) process, a spinnable CNT array was synthesized reproducibly. The CNT sheets were drawn from a sidewall of spinnable CNT array. CNT sheets were directly fixed onto Au electrodes and were heated up to 300°C for 2 h to oxidize amorphous carbon. Gas detection toward hydrogen gas was operated in a quartz tube chamber. With the change of gas concentration, the change in sensor resistances as response and recovery behavior was measured using a programmable electrometer. A sensitivity of 5% for 4% H2 was achieved at 200°C for pure CNT sheet and a sensitivity of 2.5% towards H2 gas at room temperature was achieved by Pd functionalization.
Carbon Nanomaterials: Synthesis, Functionalization and Sensing Applications

Giorgio Speranza

DOI: https://doi.org/10.3390/nano11040967

IF: 5.3

2021-04-09

Nanomaterials

Abstract:Recent advances in nanomaterial design and synthesis has resulted in robust sensing systems that display superior analytical performance. The use of nanomaterials within sensors has accelerated new routes and opportunities for the detection of analytes or target molecules. Among others, carbon-based sensors have reported biocompatibility, better sensitivity, better selectivity and lower limits of detection to reveal a wide range of organic and inorganic molecules. Carbon nanomaterials are among the most extensively studied materials because of their unique properties spanning from the high specific surface area, high carrier mobility, high electrical conductivity, flexibility, and optical transparency fostering their use in sensing applications. In this paper, a comprehensive review has been made to cover recent developments in the field of carbon-based nanomaterials for sensing applications. The review describes nanomaterials like fullerenes, carbon onions, carbon quantum dots, nanodiamonds, carbon nanotubes, and graphene. Synthesis of these nanostructures has been discussed along with their functionalization methods. The recent application of all these nanomaterials in sensing applications has been highlighted for the principal applicative field and the future prospects and possibilities have been outlined.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Recent Advances in Integrating 1D Nanomaterials into Chemiresistive Gas Sensor Devices

Jiancheng Lin,Mohamed Kilani,Guangzhao Mao

DOI: https://doi.org/10.1002/admt.202202038

IF: 6.8

2023-04-08

Advanced Materials Technologies

Abstract:1D nanomaterials are promising sensor materials for healthcare, industrial and residential environment monitoring, aerospace, defense, food quality control, and agriculture applications. Recent advances in addressing the challenges of 1D nanosensor scale up and real‐world use are reviewed. The material types include both the common ones in R&D development such as metal oxides and carbon nanotubes as well as metal and charge‐transfer complex nanowires. There is rapid growth in the global gas sensor market driven by new regulations for industrial emission control and residential environments and increasing demand for portable devices. Nanosensors promise to be the next generation gas sensors for the direct detection of chemical species due to their ultrahigh sensitivity, fast response, ultralow weight, and low power consumption. However, transitioning nanosensors from basic research or prototype projects to commercial products encounters two major technical challenges: difficulty in scale up and inability to demonstrate real‐world use in changing humidity and temperature conditions. The advances in addressing these two technical challenges in recent literature are surveyed. The most common 1D nanomaterials in R&D for gas sensing, metal oxides, and carbon nanotubes, as well as less common metal nanowires and psudo‐1D crystals made from charge‐transfer complexes (CTCs) are included. This review delves into the specifics of each of these 1D nanomaterials for gas sensing applications, their synthesis and deposition, sensing performance, and commercial development in the last 5 years. It highlights the scalability of one‐step electrodeposition of CTC nanowires on prefabricated electrodes, at room temperature, and from solution in making gas nanosensors.

materials science, multidisciplinary
Recent Advances in Ammonia Gas Sensors Based on Carbon Nanomaterials

Alexander G. Bannov,Maxim V. Popov,Andrei E. Brester,Pavel B. Kurmashov

DOI: https://doi.org/10.3390/mi12020186

IF: 3.4

2021-02-12

Micromachines

Abstract:This review paper is devoted to an extended analysis of ammonia gas sensors based on carbon nanomaterials. It provides a detailed comparison of various types of active materials used for the detection of ammonia, e.g., carbon nanotubes, carbon nanofibers, graphene, graphene oxide, and related materials. Different parameters that can affect the performance of chemiresistive gas sensors are discussed. The paper also gives a comparison of the sensing characteristics (response, response time, recovery time, operating temperature) of gas sensors based on carbon nanomaterials. The results of our tests on ammonia gas sensors using various techniques are analyzed. The problems related to the recovery of sensors using various approaches are also considered. Finally, the impact of relative humidity on the sensing behavior of carbon nanomaterials of various different natures was estimated.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Carbon Nanofiber-Based Functional Nanomaterials for Sensor Applications

Zhuqing Wang,Shasha Wu,Jian Wang,Along Yu,Gang Wei

DOI: https://doi.org/10.3390/nano9071045

IF: 5.3

2019-07-22

Nanomaterials

Abstract:Carbon nanofibers (CNFs) exhibit great potentials in the fields of materials science, biomedicine, tissue engineering, catalysis, energy, environmental science, and analytical science due to their unique physical and chemical properties. Usually, CNFs with flat, mesoporous, and porous surfaces can be synthesized by chemical vapor deposition and electrospinning techniques with subsequent chemical treatment. Meanwhile, the surfaces of CNFs are easy to modify with various materials to extend the applications of CNF-based hybrid nanomaterials in multiple fields. In this review, we focus on the design, synthesis, and sensor applications of CNF-based functional nanomaterials. The fabrication strategies of CNF-based functional nanomaterials by adding metallic nanoparticles (NPs), metal oxide NPs, alloy, silica, polymers, and others into CNFs are introduced and discussed. In addition, the sensor applications of CNF-based nanomaterials for detecting gas, strain, pressure, small molecule, and biomacromolecules are demonstrated in detail. This work will be beneficial for the readers to understand the strategies for fabricating various CNF-based nanomaterials, and explore new applications in energy, catalysis, and environmental science.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
A Flexible Gas Sensor Based on Single-Walled Carbon Nanotube-Fe2o3 Composite Film

Chunfei Hua,Yuanyuan Shang,Ying Wang,Jie Xu,Yingjiu Zhang,Xinjian Li,Anyuan Cao

DOI: https://doi.org/10.1016/j.apsusc.2017.01.301

IF: 6.7

2017-01-01

Applied Surface Science

Abstract:Single-walled carbon nanotubes (SWNTs) have potential for creating high performance gas sensors, but the number of gases that can be detected is still limited and the sensitivity needs further improvement. Here, large-area SWNT films directly synthesized by chemical vapor deposition are configured into gas sensors for a range of toxic gases such as NH3, NO, and NO2. In particular, a SWNT-Fe2O3 composite film obtained via a simple annealing process produces a stable response to H2S and shows enhanced sensitivity to NO2 and at room temperature, compared with pristine SWNT films. Formation of uniform Fe2O3 nanoparticles throughout the porous film is responsible for improved performance and enabling sensing to more gases, and removes conventional steps such as chemical functionalization or doping. Flexible sensors that can be bent to large angles repeatedly are also demonstrated. SWNT films containing a large amount of residual catalyst can be directly manufactured into large-area, flexible or wearable, thin film or textile-configured sensors for various toxic gases. (C) 2017 Elsevier B.V. All rights reserved.
Recent Progress on Functionalized Graphene Quantum Dots and Their Nanocomposites for Enhanced Gas Sensing Applications

Thivyah Balakrishnan,Suresh Sagadevan,Minh-Vien Le,Tetsuo Soga,Won-Chun Oh

DOI: https://doi.org/10.3390/nano14010011

2023-12-19

Abstract:Gas-sensing technology has witnessed significant advancements that have been driven by the emergence of graphene quantum dots (GQDs) and their tailored nanocomposites. This comprehensive review surveys the recent progress made in the construction methods and applications of functionalized GQDs and GQD-based nanocomposites for gas sensing. The gas-sensing mechanisms, based on the Fermi-level control and charge carrier depletion layer theory, are briefly explained through the formation of heterojunctions and the adsorption/desorption principle. Furthermore, this review explores the enhancements achieved through the incorporation of GQDs into nanocomposites with diverse matrices, including polymers, metal oxides, and 2D materials. We also provide an overview of the key progress in various hazardous gas sensing applications using functionalized GQDs and GQD-based nanocomposites, focusing on key detection parameters such as sensitivity, selectivity, stability, response and recovery time, repeatability, and limit of detection (LOD). According to the most recent data, the normally reported values for the LOD of various toxic gases using GQD-based sensors are in the range of 1-10 ppm. Remarkably, some GQD-based sensors exhibit extremely low detection limits, such as N-GQDs/SnO2 (0.01 ppb for formaldehyde) and GQD@SnO2 (0.10 ppb for NO2). This review provides an up-to-date perspective on the evolving landscape of functionalized GQDs and their nanocomposites as pivotal components in the development of advanced gas sensors.

Latest Advances in Modified/Functionalized Carbon Nanotube- Based Gas Sensors

Preparation of CNTs/PANi core/shell-structured nanowires and improvement of sensitivity of chemical sensors

Nanocarbon-Based Gas Sensors: Progress and Challenges

Research Advances of Carbon Nanotube-based Gas Sensors

Carbon Materials for Gas and Bio-Sensing Applications Beyond Graphene

Gas sensors using carbon nanomaterials: A review

Recent Advances in Nanostructured Materials for Application as Gas Sensors

Carbon nano materials as gas sensors

Flexible Gas Sensors Based on Carbon Nanotube Hybrid Films: A Review

Computational Design of Chemical Nanosensors: Metal Doped Carbon Nanotubes

Toward Practical Gas Sensing with Rapid Recovery Semiconducting Carbon Nanotube Film Sensors

Carbon Nanotube Gas Sensor Based on Corona Discharge

Special Issue "Advanced Nanomaterials Based Gas Sensors"

Fabrication of Carbon-Nanotube Sheet Based Hydrogen Sensor

Carbon Nanomaterials: Synthesis, Functionalization and Sensing Applications

Recent Advances in Integrating 1D Nanomaterials into Chemiresistive Gas Sensor Devices

Recent Advances in Ammonia Gas Sensors Based on Carbon Nanomaterials

Carbon Nanofiber-Based Functional Nanomaterials for Sensor Applications

A Flexible Gas Sensor Based on Single-Walled Carbon Nanotube-Fe2o3 Composite Film

Recent Progress on Functionalized Graphene Quantum Dots and Their Nanocomposites for Enhanced Gas Sensing Applications