Study on the turbulent diffusion coefficients of contaminants in an underground limestone mine with large cross section using tracer gas

Doo Young Kim,Seung Ho Lee,Kyu Hong Jeong,Chang Woo Lee

DOI: https://doi.org/10.1080/12269328.2013.806051

2013-06-01

Geosystem Engineering

Abstract:Turbulent diffusion coefficients were estimated using sulfur hexafloride (SF6) as a tracer gas in an underground limestone mine with large cross-sectional area driven by the room-and-pillar mining method. In the case of a large underground airway showing very low air velocity of < 0.1 m/s, turbulent diffusion is more influential than convective diffusion. This suggests that turbulent diffusion has to be understood prior to estimating the concentration of distribution of contaminants in the working area. SF6 concentrations were measured at a point downstream of the release point and turbulent diffusion coefficients were determined along with the average air velocity from the measured concentration profiles including multiple modes. The well-known Taylor equation was found to be inappropriate as the estimation method for turbulent diffusion coefficient in underground mines. A curve-fitting method assuming the existence of multiple modes associated with individual concentration distributions was used to estimate the diffusion coefficients. The study results show that the turbulent diffusion coefficients range from 0.01 to 1.80 m2/s in the airway with large cross-sectional area of 84 m2 and low velocity of < 1.0 m/s.