Abstract:Ba0.8Sr0.2CuSi2O6 ceramics have a low dielectric constant, which is useful for low-latency 5G communication. To enable the preparation of Ba0.8Sr0.2CuSi2O6 low-temperature co-fired ceramic (LTCC) materials, LBSCA and LBBS were used in this paper to reduce the sintering temperature of Ba0.8Sr0.2CuSi2O6. The effects of LBSCA and LBBS on the phase composition, densification, microscopic morphology, and vibrational characteristics of the ceramics were investigated by X-ray diffraction, scanning electron microscopy, density measurements, and Raman spectroscopy, and the causal factors influencing the microwave dielectric properties with the addition of glass were analyzed. It was found that 0.4 wt% LBSCA glass and 1 wt% LBBS glass reduced the sintering temperature to 925 °C, and these prepared ceramics had excellent microwave dielectric properties. The ceramic prepared with 0.4 wt% LBSCA glass had an ε r value of 7.672, Q × f value of 37193 GHz, and τ f value of −14.93 ppm/°C, while the ceramic prepared with 1 wt% LBBS glass had an ε r value of 7.512, Q × f value of 32136 GHz, and τ f value of −13.92 ppm/°C. The phase composition of the ceramics did not significantly change, indicating that neither glass reacted with the ceramics. The ε r value was affected by both density and Raman shift, the trend in the Q × f values was consistent with the density, and the τ f value decreased with increasing glass content, which was attributed to the liquid phase generated by the glass in the ceramic. In addition, co-firing these glass-doped ceramics with Ag at a low temperature resulted in good chemical compatibility. Combined with the near-zero τ f, these results demonstrate the excellent promise of these two ceramics as alternative materials for LTCC microwave devices and their application in 5G communication.

Effect of lanthanum substrates on the structural, optical and electrical properties of copper selenide thin films designed for 5G technologies

Effect of Temperature on the Emission Properties of Quasi 2D Glass-Like Carbon Placed on Silicon and Silicon Dioxide Substrates

Impact of film thickness on optical properties and optoelectrical parameters of novel CuGaGeSe4 thin films synthesized by electron beam deposition

Effect of Annealing Conditions on the Physio-Chemical Properties of Spin-Coated As2se3 Chalcogenide Glass Films

Synthesis of Copper Nanosheets Coatings onto Glass and Glass/CrSe2 Substrates Using Ion Coating Technique for Terahertz Technology

Enhanced Optical and Electrical Interactions at the Pt/MgSe Interfaces Designed for 6G Communication Technology

Preparation of P-type LaSe2 Films with Conductivity and Mid-Infrared Transparency by Combining Magnetron Sputtering and Selenized Annealing

Assessing the Electronic and Optical Properties of Lanathanum Diselenide: a computational study

Cu role in the optical constants of Cu2xGe40−xS60−x films for optoelectronics and photovoltaic applications

The effects of sputtering power on optical and electrical properties of copper selenide thin films deposited by magnetron sputtering

Electrical Properties of Laser Evaporated CuGaSe2 Thin Films

Preparation and properties of laser evaporated CuGaSe2 thin films

Insight on the optoelectronic properties of novel quaternary Ge–Se–Tl–Sb non-crystalline glassy alloy films for optical fiber sensing devices

Optical Transparency, Carrier Mobility, and Electrical Conductivity of La-based Copper Layered Oxychalcogenides: A Density Functional Theory Study

Fabrication and Electrochemical Characterization of Copper Selenide Thin Films by Pulsed Laser Deposition

Effects of Amorphous Si Substrates on the Optoelectronic Properties of Zinc Phthalocyanine Thin Films

Effect of Substrate Temperature on CIGS Thin Films Prepared by Quarternary Laminating Selenization Proces

A review of the properties, synthesis and applications of lanthanum copper oxychalcogenides

Study on the performance of thin-film VCSELs on composite metal substrate

Temperature-stable Ba0.8Sr0.2CuSi2O6 microwave dielectric ceramics for LTCC application achieved with the addition of LBSCA and LBBS glass

Optical absorption in laser-evaporated thin films of CuGaSe<Subscript>2</Subscript>