Abstract:Currently, there is a demand in the aerospace industry for a more effective and non-invasive milling technique for powder metallurgy γ-TiAl alloy. The primary objective of this research is to examine the surface milling process of a γ-TiAl alloy generated by powder metallurgy. The primary objective of this study is to examine the impact of process parameters on the surface roughness and cutting force of the alloy, with the aim of optimizing both surface roughness and cutting force. The response surface method was implemented to examine the milling process, and the NSGA II algorithm was employed to optimise surface roughness, cutting force, and material removal rate. The findings indicate that the cutting depth exerts a significant impact on both the surface morphology and surface roughness. The available data indicates a clear correlation between the depth of cutting and the rate of feed, as well as the resulting assessment of surface roughness. Nevertheless, the first rise in spindle speed is associated with a subsequent increase in surface roughness, followed by a subsequent drop of a lesser magnitude. A minimal threshold for surface roughness has been established at 0.203μm. The spindle speed exerts the primary impact on the cutting force. There exists a positive link between the cutting force value and both the cutting depth and feed speed, as the cutting force value has a positive correlation with the incremental changes in these variables. Nevertheless, the relationship between cutting force and the observed trend is non-linear, exhibiting an initial decrease followed by a rise when cutting force is augmented. The minimal cutting force necessary was quantified as 112.3 N. Subsequently, a regression analysis was employed to develop a correlation model between surface roughness and cutting force. and machining parameters. The confirmation of the coefficients' validity in the model was achieved via the utilisation of analysis of variance (ANOVA) and residual analysis. The main goal of developing a machining parameter optimisation model is to limit surface roughness and cutting force, thereby improving operational efficiency. The NSGA-II method is utilised to tackle the problem of multi-objective optimisation, leading to the attainment of the optimal parameter solution. The purpose of the verification test is to evaluate the precision of the forecasts generated by the optimised model. The work holds importance in its analysis and juxtaposition of diverse processing factors, alongside the use of multi-objective optimization methodologies.

Double optimization of the mesoscopic geometric parameters of ball-end milling cutters based on interactive experiment

Support vector regression and genetic-algorithm-based multiobjective optimization of mesoscopic geometric characteristic parameters of ball-end milling tool

Wear optimization of titanium alloy cutter milled with microtextured ball-end milling cutter

Accurate preparation of mesoscopic geometric characteristics of ball end milling cutter and optimization of cutting performance

Optimizing the micro-texture and cutting parameters of ball-end milling cutters to achieve milling stability

Study on Multi-Objective Optimization of Milling Process of Powder Metallurgy Titanium Aluminum Alloys

Research on micro-texture placement position and cutting performance of negative chamfering ball-end milling cutter

Parameter optimization of ball-end milling cutter with blunt-round edge and micro-texture on flank

Micro-texture design criteria for cemented carbide ball-end milling cutters

Ball-end Milling Cutter Design Method Towards the Maximum Material Removal Rate under Surface Roughness Constraints

Study on the Properties of Sinusoidal Micro-Textured Ball End Milling Cutter for Milling Titanium Alloy

Analysis of Surface Characteristics of Titanium Alloy Milling with Ball-End Milling Cutters Based on Mesoscopic Geometric Features

High Efficiency Orientated Milling Parameter Optimization with Tool Wear Monitoring in Roughing Operation

Tool segmentation design method of hybrid optimization framework with geometric modeling-finite element-genetic algorithm

Analysis and optimization of cutter geometric parameters for surface integrity in milling titanium alloy using a modified grey–Taguchi method

An Experimental Study into the Effect of Micro-Textures on the Performance of Cutting Tool

The Experiment Research of Cutting Parameters Optimization in High-speed Micro-milling Hard Processing Materials

Examination of Surface Milling Performance of Micro-Textured Ball Milling Cutter

Suppressing the burr of high aspect ratio structure by optimizing the cutting parameters in the micro-milling process

Optimization of Cutter Geometric Parameters in End Milling of Titanium Alloy Using the Grey-Taguchi Method

Effect of laser texturing process on properties of composite coated cemented carbide ball-end milling cutter milling titanium alloy