Abstract:The poses of base station antennas play an important role in cellular network optimization. Existing methods of pose estimation are based on physical measurements performed either by tower climbers or using additional sensors attached to antennas. In this paper, we present a novel non-contact method of antenna pose measurement based on multi-view images of the antenna and inertial measurement unit (IMU) data captured by a mobile phone. Given a known 3D model of the antenna, we first estimate the antenna pose relative to the phone camera from the multi-view images and then employ the corresponding IMU data to transform the pose from the camera coordinate frame into the Earth coordinate frame. To enhance the resulting accuracy, we improve existing camera-IMU calibration models by introducing additional degrees of freedom between the IMU sensors and defining a new error metric based on both the downtilt and azimuth angles, instead of a unified rotational error metric, to refine the calibration. In comparison with existing camera-IMU calibration methods, our method achieves an improvement in azimuth accuracy of approximately 1.0 degree on average while maintaining the same level of downtilt accuracy. For the pose estimation in the camera coordinate frame, we propose an automatic method of initializing the optimization solver and generating bounding constraints on the resulting pose to achieve better accuracy. With this initialization, state-of-the-art visual pose estimation methods yield satisfactory results in more than 75% of cases when plugged into our pipeline, and our solution, which takes advantage of the constraints, achieves even lower estimation errors on the downtilt and azimuth angles, both on average (0.13 and 0.3 degrees lower, respectively) and in the worst case (0.15 and 7.3 degrees lower, respectively), according to an evaluation conducted on a dataset consisting of 65 groups of data. We show that both of our enhancements contribute to the performance improvement offered by the proposed estimation pipeline, which achieves downtilt and azimuth accuracies of respectively 0.47 and 5.6 degrees on average and 1.38 and 12.0 degrees in the worst case, thereby satisfying the accuracy requirements for network optimization in the telecommunication industry.

NB-IoT based method for monitoring the tilt status of transmission towers

Transmission Tower Tilt Monitoring System Using Low-Power Wide-Area Network Technology

A Deformation Monitoring System Based on NB-IoT

Research on the Tower Pole Tilt Mechanism and Risk Assessment Technology Based on BeiDou reverse network RTK

A Transmission Line Tower Tilt Detection Method Based on BeiDou Positioning Signals and UAV Inspection Images

Design of Indoor Temperature Monitoring System Based on Narrowband Internet of Things.

The Research and Implementation Transmission Line Tower Rod and Monitoring System Using Reverse Network RTK Technology

Accurate Performance Modeling of Uplink Transmission in NB-IoT

Research about the on-line system for monitoring the geological subsidence of transmission tower based on high-precision positioning of Beidou

A WIRELESS REMOTE MONITORING SENSOR FOR AGRICULTURAL ENVIRONMENT BASED ON NB-IoT

A Novel Monocular Vision Technique for the Detection of Electric Transmission Tower Tilting Trend

Estimation of Antenna Pose in the Earth Frame Using Camera and Imu Data from Mobile Phones

A Design of Industrial Park Environment Monitoring System Based on NB-IoT

Design of Wireless Monitoring System for Power Terminal Equipment based on NB-IoT

City-Wide NB-IoT Network Monitoring and Diagnosing

Development of a monitoring system for disassembled towers with internal suspension poles

Lifelong Condition Monitoring Based on NB-IoT for Anomaly Detection of Machinery Equipment

An IoT-Based System for Monitoring the Health of Guyed Towers in Overhead Power Lines

Development of Monitoring Tower Using Gyroscope Sensor Based on Esp32 Microcontroller

An online monitoring technology of tower foundation deformation of transmission lines

Monitoring routing status of UAV networks with NB-IoT