Abstract:_ Controlling inorganic sulphate and carbonate scales with polymer, phosphonate, and phosphate ester scale inhibitors is commonplace in the oilfield services industry. It is well understood in what environments induvial inhibitor types work best; for example, sulphonates are very effective for sulphate scale control in low temperatures (SPE 80229) whereas phosphonates are much less effective under these same conditions but improve at higher temperatures (SPE 179889). Less well understood is the potential for scale inhibitors utilizing synergistic interactions with blends of polymers, phosphonates, and phosphate esters to reduce chemical cost, treatment rates, and transport logistics, resulting in a more effective scale management program with a reduced operational footprint. To evaluate performance of a selected range of blended inhibitors, ChampionX performed a trial on a North Sea produced water system, which was applying monoethanolamine (MEA) phosphonate-type scale inhibitor as well as novel cleaning programs to counter a high carbonate saturation ratio in the heater (SPE 204365). The objective was to find an improved scale inhibitor formulation that would outperform MEA phosphonate to control the high calcite saturation ratio brine. In this application, produced fluids pass through a heater with a skin temperature between 90°C and 105°C. Identifying the Scale Challenge Studies of synergistic properties of phosphonates and polymer scale inhibitors show there is potential to create blends of existing chemicals to make a formulation that shows a performance greater than either inhibitor component on its own. Four generic scale inhibitors that could effectively prevent scale at 105°C were considered. 1. A poly aspartate acid, generally found to be thermally stable to 120°C 2. The incumbent MEA phosphonate chemical, which is widely used for this type of scale inhibition at elevated temperature 3. A phosphate ester, found to be thermally stable at temperatures of 90°C 4. Phosphonate-functionalized biopolymer, which showed good carbonate inhibition properties and excellent environmental properties The goal was to develop a synergistic blend that would mitigate the legislative (cost of REACH registration) and economic (cost of new raw material product set up within the supply chain system) issues associated with the development of new classes of scale inhibitor for a relatively small market. There are two primary methods of scale inhibition in produced water. The first is crystal nucleation inhibition, which prevents the onset of scale formation itself by keeping the ions in solution. This mechanism of inhibition is best evaluated via dynamic scale loop (DSL) tests. The polymer-type scale inhibitors (such as carboxylic acid functionated homo and copolymers, for example VS-Co) work well within this test, as they prevent deposition at low treatment rate. The other principal inhibition mechanism is crystal-growth inhibition. This prevents the continued growth of microscale crystals as the inhibitor interacts with the scale crystal surface to prevent further addition of sulphate/barium ions. This is best evaluated via static bottle tests. Phosphonate-type scale inhibitors, for example, diethylenetriamine penta (methylene phosphonic acid), work well within this type of test.

Scale Control for Long Term Well and Facility Preservation

Developments on Calcium Sulfate Scaling Prediction and Control in Oil and Gas Production

Development of Scale Inhibitor for High Salinity High Iron Containing Brines

Iron Carbonate Scale Inhibitor Selection for Low-Permeability, High-Temperature, Low-Pressure, and Low Water-Cut Gas Wells in Chalk Formation

Well Production Optimization under the Scale Effect and CO2-WAG Injection in a Carbonate Model of the Brazilian Pre-Salt

A New Precipitation Squeeze Alternative for Treating Harsh Barium Sulphate Scaling in a Highly Naturally Fractured North Sea Carbonate Reservoir

A Study of Formation of Calcium Carbonate Scale in Circulating Cooling Water System and Its Control

Enhanced Carbonate Scale Inhibition in the North Sea via Synergistic Inhibitor Molecule Blends

Study of the kinetic behavior of chemical inhibitors in calcium carbonate scale formation

Study on the Sustained Release Behavior of a Slow-Release Scale-Inhibiting Material

Review of Synthesis and Evaluation of Inhibitor Nanomaterials for Oilfield Mineral Scale Control

Novel strategy to control the elevated drizzle scale in chemical EOR pilot with unfavorable harsh environment of sandstone reservoir

Synthesis and Performance Evaluation of Modified Polyaspartic-Acid-Based Scale Inhibitor

A review of scale inhibitor methods during modified smart water injection

A New Kinetic Turbidity Test Method for Calcite Scale Inhibition Study and Updates on Barite Scale Inhibition Model

Study on Performance of New Corrosion and Scale Inhibitor Composed of CA/HEDP/IA-SSA Copolymer

Improved Scale Prediction for High Calcium Containing Produced Brine and Sulfide Scales

Scale Inhibitors for Industrial Circulating Water Systems: A Review

Study on the scale inhibition performance of organic chelating agent aided by surfactants on CaCO 3 at high salinity condition

Performance and mechanism study of PESA-IA as a green oilfield scale inhibitor: experimental and molecular dynamics simulation

CaCO3scaling of Oilfield Produced Water in “electrochemical Pre-Oxidation–coagulation Sedimentation–filtration” Process: Reason, Mechanism, and Countermeasure