Abstract:Electrochemical and energy storage properties of poly(styrene sulfonate) doped poly (3, 4-ethylenedioxythiophene) (PEDOT:PSS) conducting polymer hybridized with the multiwall carbon nanotubes (MWCNT) are studied as solid-state supercapacitor with anion-doped ionic liquid (IL) gel electrolyte. The PEDOT: PSS-MWCNT composite electrodes were formed by co-electrodeposition using sequential 4 mA cm −2 current density with 10 ms current pulses in an aqueous medium with highly dispersed MWCNTs using Na-dodecyl sulfate (SDS) surfactant, PSS dopant (10–20 %) and EDOT monomer. Raman spectral study confirms with ≤10% PSS, the MWCNTs are moored into PEDOT chains via covalent bonding with carbons at α and β-position as PEDOT grows over flexible graphite substrate. Specific capacitance of 138 F g −1 discerned from cyclic voltammetry in IL-gel electrolyte is higher than reported in liquid electrolytes and chemically polymerized electrodes. Electrical double layer (EDL) capacitance analysis shows high 71.2 mF cm −2 contribution originated from MWCNTs with 10 % PSS, and slightly lower 48.8 mF cm −2 with 20 % PSS. The performance optimized PEDOT: PSS (10 %)- MWCNT (1 mg) based supercapacitors show large (43 %) access to the electroactive nanoporous surface regions contributing to capacitive charge and 57 % electrode has access to charge storage via diffusion limited Faradaic process . Nyquist plots analyzed for Warburg coefficient show minimal charge transfer resistance unimpacted by ionic diffusion. From the frequency response of the real and imaginary impedances pulsed power is assessed as 6.33 kW kg −1 at energy density 3.43 Wh kg −1 . Charge-discharge behavior of optimized supercapacitor over 0.05–2.0 A g −1 current densities is triangular, highly symmetrical. Ragone plot shows high energy density of 7.7 Wh kg −1 at specific power 5.3 kW kg −1 plateauing out to 4.4 Wh kg −1 at higher specific power of 11.5 kW kg −1 . Charge-discharge cycle analysis shows merely 20 % loss of specific capacitance by ∼500 cycles largely stabilizing for over 2000 cycles while the Coulomb efficiency remaining invariant at 95 %.

Performance of ionic liquid–based quasi‐solid‐state hybrid battery supercapacitor fabricated with porous carbon capacitive cathode and proton battery anode

Hydroxypolybenzimidazole Electrolyte with Excellent Stability for High Power Density All-Solid-State Supercapacitors

High-Temperature and All-Solid-State Flexible Supercapacitors with Excellent Long-Term Stability Based on Porous Polybenzimidazole/Functional Ionic Liquid Electrolyte.

Performance of solid-state hybrid supercapacitor with LiFePO4/AC composite cathode and Li4Ti5O12 as anode

All‐Cellulose‐Based Quasi‐Solid‐State Sodium‐Ion Hybrid Capacitors Enabled by Structural Hierarchy

Highly Durable, Self-Standing Solid-State Supercapacitor Based on an Ionic Liquid-Rich Ionogel and Porous Carbon Nanofiber Electrodes.

Protic ionic liquid-based gel polymer electrolyte: structural and ion transport studies and its application in proton battery

Development and Supercapacitor Application of Ionic Liquid-Incorporated Gel Polymer Electrolyte Films

High-Performance Ionic Liquid-Based Gel Polymer Electrolyte Incorporating Anion-Trapping Boron Sites for All-Solid-State Supercapacitor Application.

Ionic Liquid Gel Electrolyte with WS2 Electrode for Highly Stable High-Voltage Solid-State Supercapacitors

Hybrid Aqueous Energy Storage Cells Using Activated Carbon and Lithium-Ion Intercalated Compounds - Iv. Possibility of Using Polymer Gel Electrolyte

Ionic Liquid–Heteropolyacid: Synthesis, Characterization, and Supercapacitor Study of Films Deposited by Electrophoresis

Electrochemical energy storage performance of asymmetric PEDOT and graphene electrode-based supercapacitors using ionic liquid gel electrolyte

Nanocomposite Perfluorosulfonic Acid/Montmorillonite-Na+ Polymer Membrane as Gel Electrolyte in Hybrid Supercapacitors

High Performance Flexible Quasi-Solid-state Zinc-Ion Hybrid Supercapacitors Enable by Electrode Potential Adjustment

Co-electrodeposited poly (3, 4-ethylenedioxythiophene) (PEDOT)-multiwall carbon nanotubes (MWCNT) hybrid electrodes based solid-state supercapacitors using ionic liquid gel electrolyte for energy storage with pulsed power capabilities

High energy density carbon supercapacitor with ionic liquid-based gel polymer electrolyte: Role of redox-additive potassium iodide

Cross-Linked Composite Gel Polymer Electrolyte Based on an H-Shaped Poly(ethylene oxide)-Poly(propylene oxide) Tetrablock Copolymer with SiO2 Nanoparticles for Solid-State Supercapacitor Applications

Nitrogen-doped hollow carbon nanoboxes in zwitterionic polymer hydrogel electrolyte for superior quasi-solid-state zinc-ion hybrid supercapacitors

High-stable, outstanding heat resistance ionogel electrolyte and the poly(3,4-ethylenedioxythiophene) electrodes with excellent long-term stability for all-solid-state supercapacitor

A Novel High-Power Battery-Pseudocapacitor Hybrid Based on Fast Lithium Reactions in Silicon Anode and Titanium Dioxide Cathode Coated on Vertically Aligned Carbon Nanofibers