Abstract:We propose a methodology for the rheological characterization of a semisolid metal slurry using experimental squeeze flow data. The slurry is modeled as a structural thixotropic viscoplastic material, obeying the regularized Herschel-Bulkley constitutive equation. All rheological parameters are assumed to vary with the structure parameter that is governed by a first-order kinetics accounting for the material structure breakdown and build-up. The squeeze flow is simulated using finite elements in a Lagrangian framework. The evolution of the sample height has been studied for wide ranges of the Bingham and Reynolds numbers, the power-law exponent as well as the kinetics parameters of the structure parameter. Systematic comparisons have been carried out with available experimental data on a semisolid aluminium alloy (A356), where the sample is compressed from its topside under a specified strain of 80% at a temperature of 582 oC while the bottom side remains fixed. Excellent agreement with the experimental data could be achieved provided that at the initial instances (up to 0.01s) of the experiment the applied load is much higher than the nominal experimental load and that the yield stress and the power-law exponent vary linearly with the structure parameter. The first assumption implies that a different model, such as an elastoviscoplastic one, needs to be employed during the initial stages of the experiment. As for the second one, the evolution of the sample height can be reproduced allowing the yield stress to vary from 0 (no structure) to a maximum nominal value (full structure) and the power-law exponent from 0.2 to 1.4, i.e., from the shear-thinning to the shear-thickening regime. These variations are consistent with the internal microstructure variation pattern known to be exhibited by semisolid slurries.

Viscosity measurements in semi-solid metal processing: current status and recent developments

Measurement and calculation of the viscosity of metals—a review of the current status and developing trends

Review on criteria for assessing the processability of semisolid alloys

The measurement of viscosity of alloys—a review of methods, data and models

An Overview on the Process Development and the Formation of Non-Dendritic Microstructure in Semi-Solid Processing of Metallic Materials

Viscosity of liquid Ni-based industrial alloys: experiments versus theory

Multiscale Analysis of the Correlation of Processing Parameters on Viscidity of Composites Fabricated by Automated Fiber Placement

Grain refinement in semi-solid metal processing: current status and recent development

Viscosity Estimation of Semi-Solid Alloys Based on Thermal Simulation Compression Tests

Progress of the Viscosity Measurement Methods

Semi-solid processing of aluminum and magnesium alloys: Status, opportunity, and challenge in China

Rheological characterization of a thixotropic semisolid slurry by means of numerical simulations of squeeze flow experiments

ReCognition of Semi-Solid Metal Forming Technologies

D7.2 - Inline viscometery for non-Newtonian viscosity characterization

Rheological Study of Microstructures and Properties for Polymeric Materials

From semisolid metal processing to thixotropic 3D printing of metallic alloys

Ultrasonic shear wave reflectometry applied to the determination of the shear moduli and viscosity of a viscoelastic bitumen

A Study of Concentrated Suspensions in Polyethylene Melts and the Impact on Viscosity and Polymer Processing Operations

Investigations on tribological behavior under lubricated condition of post heat treated additively manufactured SS316L parts

Processing and Characterization of AA2618/Sicp Metal Matrix Composites by Stir Casting Method

Electromagnetically spinning viscometer designed for measurement of low viscosity in low shear rate region