Abstract:In this paper, we show the development steps for an iterative performance and impedance model of gridded radio-frequency (RF) ion thrusters. The input parameters are equivalent to those of the real propulsion system; i.e., coil current, propellant mass flow, and extraction grid voltages. Therefore, the model is easily validated and verified by experimental data and can furthermore be used to optimize the overall thruster performance. The model predicts volume-averaged plasma parameters such as electron temperature, conductivity, total pressure, and ionization fraction as well as thruster performance data like generated thrust, specific impulse, and mass and electrical efficiency. The above mentioned plasma parameters are obtained as functions of the discharge chamber’s geometry by using a charge balance equation that relates generated ions to ions lost at the chamber’s walls. The plasma related quantities influence the electromagnetic field penetration which is here evaluated by means of a diffusion equation for the vector potential. The vector potential is obtained by a 3D Finite-Difference-Method on a cubic and rectangular grid which, in principle, offers the opportunity to have arbitrary plasma chamber and coil geometries. An actual ion thruster geometry is evaluated in this study in favor of experimental verification of the numerically obtained data. The thruster’s coil generates highly asymmetric electromagnetic fields which motivates the use of a three-dimensional solver. A dissipation model based on Ohm’s law and Poynting’s theorem is used to determine the absorbed power within the discharge. To obtain a stable solution, the electromagnetically absorbed power is equated to the power lost due to elastic and inelastic collisions and electron wall flux. This whole process is iteratively repeated until the degree of ionization converges within a given threshold. To relate the stable discharge parameters to the thruster performance an extraction model based on a modified version of Child-Langmuir’s law is used. Within the model, the extracted ion beam current is calculated as a function of extraction aperture, applied extraction voltage, and plasma sheath size. A particle balance equation is then used to iteratively compute the total pressure combining neutral, electron, and ion pressures. After convergence, the plasma impedance, typically described by a transformer model, is transformed to its equivalent series representation as seen by the RF source at its terminals. Furthermore, thruster performance data are evaluated which gives rise to use this model for optimization purposes. It can thus be regarded as a toolbox for virtual prototyping.Graphical abstract

2-D Electromagnetic and Fluid Models for Inductively Coupled Plasma for RF Ion Thruster Performance Evaluation

Numerical research of a 2D axial symmetry hybrid model for the radio-frequency ion thruster

Multiphysics Model for Radio-Frequency Gridded Ion Thruster Performance

Implementation and verification of a hybrid performance and impedance model of gridded radio-frequency ion thrusters

Numerical Simulation of Weakly Ionized Dynamic Plasma for Reentry Vehicles

Coupled plasma transport and electromagnetic wave simulation of an ECR thruster

Integral electrical characteristics and local plasma parameters of a RF ion thruster

Better Prediction of the Performance of a Radio-frequency Ion Thruster

Global model of a radio-frequency ion thruster based on a holistic treatment of electron and ion density profiles

Numerical Simulation of Radio Frequency Induction Plasma Spray Processing

Kinetic simulations of low-pressure inductively coupled plasma: an implicit electromagnetic PIC/MCC model with the ADI-FDTD method

Two-dimensional Model and Experimental Comparison of an Inductively Coupled Plasma

Two-Dimensional Discharge Simulation of Inductively Coupled Plasma Etcher

Optimization of a coaxial electron cyclotron resonance plasma thruster with an analytical model

Numerical simulation and experimental research of LRIT-30 radio frequency ion thruster

Self-Consistent Kinetic Modeling of Low-Pressure Inductively Coupled Radio-Frequency Discharges

Numerical investigation of plasma properties for the microwave discharge ion thruster μ10 using PIC-MCC simulation

Two-Dimensional Simulation of Inductively Coupled Plasma Based on Comsol and Comparison with Experimental Data

Numerical Study of Particle In-Flight Characteristics in a RF Induction Plasma Spray

Vector Resolved Energy Fluxes and Collisional Energy Losses in Magnetic Nozzle Radiofrequency Plasma Thrusters

0-D composition and performance analysis of an air-breathing radiofrequency ion thruster