Abstract:Calculating wind resistance is an important process in the design of highway bridges. The current codes of many countries include different rules and formulas regarding the calculation of wind resistance. In this paper, the transverse-direction wind loads on long-span girder bridges with tall piers were calculated using six codes from different countries under various terrain, pier height, and girder length conditions. The pier-bottom shear force and moment results of transverse wind loads calculated using these six codes were compared with those obtained using the buffeting frequency domain method. Results showed that, in Class B terrain, wind load results predicated on China's 2004 general codes for the design of highway bridges and culverts, China's 2004 wind-resistant design specifications for highway bridges, Japan's 2007 wind-resistant design manual for highway bridges, and Part 2 of Britain's 2006 steel, concrete, and composite bridge specifications for loads resembled each other closely. Some difference was found to exist among Classes A, C, and D terrain. The 2007 AASHTO LRFD bridge design specifications and China's 2001 load codes for the design of building structures showed significant differences from the other four codes on all kinds of terrain. The applicability of the wind load rules in the AASHTO LRFD bridge design specifications to long-span girder bridges with tall piers merits further discussion. China's wind load calculations of load code for the design of building structures mainly depended on the empirical parameters of architectural structures with large dimensions, and had limited applicability to bridge structures. For long-span girder bridges with tall piers, such as bridges with span length-to-width or -depth ratios exceeding 30, or pier height-to-transverse-width ratio exceeding 10.7, the wind load calculated using these codes was generally underestimated due to the neglect of the effects of aeroelastic forces, which must be taken into account in the design of these kinds of bridges. DOI: 10.1061/(ASCE)BE.1943-5592.0000316. (C) 2012 American Society of Civil Engineers.

CFD-Based Wind Field Correction Method for Terrain Wind Tunnel Tests

NUMERICAL WIND TUNNEL TECHNIQUE FOR THE WIND RESISTANCE ANALYSIS OF LONG SPAN SPATIAL STRUCTURES

The Numerical Simulation for the Wind Fields and Wind Loads Around Spatial Structures

Wind tunnel test and numerical simulation of wind characteristics at a bridge site in mountainous terrain

NUMERICAL SIMULATION OF WIND PRESSURES ON CANTILEVER GRANDSTAND ROOFS

Field Measurement of Wind Pressure on a Large-Scale Spatial Structure and Comparison with Wind Tunnel Test Results

Numerical simulation of wind characteristics at bridge site considering thermal effects

A new atmospheric boundary layer wind tunnel simulation methodology for wind effects on large cooling towers considering wind environment variations

Validation and application of pressure-driven RANS approach for wind parameter predictions in mountainous terrain

Large Eddy simulation of the fluctuating wind environment at a bridge site in the mountainous area

Methods of calculating wind loads on long-span girder bridges with tall piers and comparison of values

Numerical study of wind characteristics at a long-span bridge site in mountain valley

Investigation of hilly terrain wind characteristics considering the interference effect

An On-Site Measurement Coupled CFD Based Approach for Wind Resource Assessment over Complex Terrains.

Numerical simulation and validation of local wind environment of twin-box girder with wind barriers

Wind characteristics at bridge site in a deep-cutting gorge by wind tunnel test

EXPERIMENTAL STUDY OF STABILITY OF NATURAL DRAFT COOLING TOWER MODEL BASED ON 3D PRINTING

CFD-Based numerical simulation of wind field characteristics on valley and col terrain

Numerical Simulation of Atmospheric Boundary Layer Turbulence in a Wind Tunnel Based on a Hybrid Method

Wind Tunnel Test on the Aerodynamic Parameters of Tianxingzhou Highway-Railway Bridge Across Yangtze River

Numerical investigation on aerodynamic characteristics of a high-speed train travelling through a bridge–tunnel section under non-uniform airflows caused by mountain terrain effect