Abstract:Finding new adsorbents for the desulfurization of flue gases is a challenging task but is of current interest, as even low SO2 emissions impair the environment and health. Four Zr- and eight Al-MOFs (Zr-Fum, DUT-67(Zr), NU-1000, MOF-808, Al-Fum, MIL-53(Al), NH2-MIL-53(Al), MIL-53(tdc)(Al), CAU-10-H, MIL-96(Al), MIL-100(Al), NH2-MIL-101(Al)) were examined toward their SO2 sorption capability. Pore sizes in the range of about 4-8 Å are optimal for SO2 uptake in the low-pressure range (up to 0.1 bar). Pore widths that are only slightly larger than the kinetic diameter of 4.1 Å of the SO2 molecules allow for multi-side-dispersive interactions, which translate into high affinity at low pressure. Frameworks NH2-MIL-53(Al) and NH2-MIL-101(Al) with an NH2-group at the linker tend to show enhanced SO2 affinity. Moreover, from single-gas adsorption isotherms, ideal adsorbed solution theory (IAST) selectivities toward binary SO2/CO2 gas mixtures were determined with selectivity values between 35 and 53 at a molar fraction of 0.01 SO2 (10.000 ppm) and 1 bar for the frameworks Zr-Fum, MOF-808, NH2-MIL-53(Al), and Al-Fum. Stability tests with exposure to dry SO2 during ≤10 h and humid SO2 during 5 h showed full retention of crystallinity and porosity for Zr-Fum and DUT-67(Zr). However, NU-1000, MOF-808, Al-Fum, MIL-53(tdc), CAU-10-H, and MIL-100(Al) exhibited ≥50-90% retained Brunauer-Emmett-Teller (BET)-surface area and pore volume; while NH2-MIL-100(Al) and MIL-96(Al) demonstrated a major loss of porosity under dry SO2 and MIL-53(Al) and NH2-MIL-53(Al) under humid SO2. SO2 binding sites were revealed by density functional theory (DFT) simulation calculations with adsorption energies of -40 to -50 kJ·mol-1 for Zr-Fum and Al-Fum and even above -50 kJ·mol-1 for NH2-MIL-53(Al), in agreement with the isosteric heat of adsorption near zero coverage (ΔHads0). The predominant, highest binding energy noncovalent binding modes in both Zr-Fum and Al-Fum feature μ-OHδ+···δ-OSO hydrogen bonding interactions. The small pores of Al-Fum allow the interaction of two μ-OH bridges from opposite pore walls with the same SO2 molecule via OHδ+···δ-OSOδ-···δ+HO hydrogen bonds. For NH2-MIL-53(Al), the DFT high-energy binding sites involve NHδ+···δ-OS together with the also present Al-μ-OHδ+···δ-OS hydrogen bonding interactions and C6-πδ-···δ+SO2, Nδ-···δ+SO2 interactions.

Temperature-Dependent Nitrous Oxide/Carbon Dioxide Preferential Adsorption in a Thiazolium-Functionalized NU-1000 Metal–Organic Framework

Trace Flue Gas Contaminants Poison Coordinatively Unsaturated Metal–Organic Frameworks: Implications for CO2Adsorption and Separation

Increased CO2 Affinity and Adsorption Selectivity in MOF-801 Fluorinated Analogues

A new anionic metal–organic framework showing tunable emission by lanthanide(III) doping and highly selective CO2 adsorption properties

Benchmarking Nitrous Oxide Adsorption and Activation in Metal-Organic Frameworks Bearing Coordinatively Unsaturated Metal Centers

Nitrogen-enriched flexible metal-organic framework for CO2 adsorption

Enhanced CO2 Sorption and Selectivity by Functionalization of a NbO-type Metal-Organic Framework with Polarized Benzothiadiazole Moieties.

Substituent-Induced Electron-Transfer Strategy for Selective Adsorption of N 2 in MIL-101(Cr)-X Metal–Organic Frameworks

Selective Carbon Dioxide versus Nitrous Oxide Adsorption in Cerium(IV) Bithiazole and Bipyridyl Metal‐Organic Frameworks

Investigating the Influence of Hexanuclear Clusters in Isostructural Metal-Organic Frameworks on Toxic Gas Adsorption.

Hierarchical porous MOF/CTF hybrid frameworks used as protection against acidic harmful gases

Selective carbon dioxide sorption by a new breathing three-dimensional Zn-MOF with Lewis basic nitrogen-rich channels

A stable metal-organic framework with suitable pore sizes and rich uncoordinated nitrogen atoms on the internal surface of micropores for highly efficient CO2 capture

NO2 Removal under Ambient Conditions by Nanoporous Multivariate Zirconium-Based Metal–Organic Framework

Efficient adsorption removal of NO 2 by covalent triazine frameworks with fine-tuned binding sites

Regulation on Topological Architectures and Gas Adsorption for Cadmium-Azolate-Carboxylate Frameworks by the Ligand Flexibility

Reversible Adsorption of Nitrogen Dioxide Within a Robust Porous Metal–organic Framework

New Frontiers of Triazolate-based MOFs: Amine-Functionalization for Enhanced Diluted CO2 Capture Performance

Zirconium and Aluminum MOFs for Low-Pressure SO2 Adsorption and Potential Separation: Elucidating the Effect of Small Pores and NH2 Groups

Synergistic Nitrogen Binding Sites in a Metal-Organic Framework for Efficient N2/O2 Separation.

Computational study of adsorption and separation of CO2, CH4, and N2 by an rht-type metal-organic framework