Abstract:Energy efficiency enhancement methods have received considerable attention within the industry and scientific community, owing to the rising concern of global energy sustainability. The present article attempts to scrutinize the effects of electrohydrodynamics and nanofluids on the rate of heat transfer and fluid flow in the 3-D chain microchannels. Improved heat exchangers (e.g., chain microchannel) would have a key role in increasing of the performance of such systems since they provide efficient thermal management needed for more robust computational power. To date, analysis of electrohydrodynamics and nanofluids in the chain microchannel was not comprehensively discussed. Here, steady-state, laminar, and three-dimensional chain microchannel are numerically modeled based on a control volume method in Fluent. Results show that by increasing the volume fraction of nanoparticles, the viscosity of the nanofluid increases leading to an increase in pressure drops. Moreover, Nusselt at Re = 125, 250, 500 and 1000 for hybrid nanofluid ( ∅AL2O3=∅CuO=4% ) is 1.206, 1.541, 2.075 and 2.707, respectively which, in turn, depicts surging by 22.94%, 24.17%, 24.70% and 24.707% in comparison to water, respectively. In addition, at low Reynolds number (0.416 ≤Re≤4.166), the lower Reynolds results in decreasing of percentage of pressure drop. Meanwhile, imposing electrohydrodynamic (V = 30 KV) at Re= 125, 250, 500 and 1000 leads to increasing by 23%, 22%, 20% and 18% of Nusselt number in comparison to absence of electric field, respectively. It means that the considered effect of the increasing the Nusselt number at lower Reynolds number is more effective. Moreover, heat transfer rises with augmentation of supplied voltage and Reynolds number. Using active (electrohydrodynamics and hybrid nanofluid) and passive (3-D chain microchannel) methods to enhance heat transfer rate. Adding two additional equations (including ρc and V) in Fluent With Using UDS (User Defined Scalar). Writing UDM to achieve E ( E→=−∇V ) as well as UDF to solve source terms ( ρc. E and J→.E→ ) Considering the charge convection term ( ρcu→ ) in the electric current density ( j→=ρ(ρcβE→+ρcu→+De∇ρc)) owing to used fluids (water and nanofluids) in this article, whilst it is negligible for air. Investigation of effects of different types of nanofluid and their concentration as well as impacts of adding electrode and its voltages. Imposing electrohydrodynamic (V = 30 KV) at Re= 125, 250, 500 and 1000 leads to increasing by 23%, 22%, 20% and 18% of Nusselt number in comparison to absence of electric field, respectively.

Machine learning regression-CFD models for the nanofluid heat transfer of a microchannel heat sink with double synthetic jets

Flow and Heat Transfer Characteristics in a Microchannel with a Circular Synthetic Jet

Machine learning approach to predict heat transfer and fluid flow characteristics of integrated pin fin-metal foam heat sink

Artificial neural network and numerical analysis for performance enhancement of hybrid microchannel-pillar-jet impingement heat sink using Al2O3-water and CuO-water nanofluids

Machine Learning Assisted Microchannel Geometric Optimization—A Case Study of Channel Designs

Enhancing performance of nanofluid mini-channel heat sinks through machine learning and multi-objective optimization of operating parameters

Investigation of fluid flow and heat transfer characteristics in a microchannel heat sink with double-layered staggered cavities

Optimization of Microjet Location Using Surrogate Model Coupled with Particle Swarm Optimization Algorithm

Machine learning algorithms to study the relative roles of jet convection and natural convection in the presence of surface roughness elements on enhancement of jet impingement heat transfer

Development of machine learning algorithm for assessment of heat transfer of ternary hybrid nanofluid flow towards three different geometries: Case of artificial neural network

Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure: sinusoidal cavities and rectangular ribs

Applying machine learning to reveal the microscopic heat transfer mechanism of nanofluids as coolants

Advancing heat transfer modeling through machine learning: A focus on forced convection with nanoparticles

Experimental and numerical analysis on thermal-dynamic performance in designed impingement-jet double-layer nested microchannel heat sinks with streaming vertical bifurcations

A Predictive Surrogate Model for Heat Transfer of an Impinging Jet on a Concave Surface

Nanofluids in microchannel heat sinks for efficient flow cooling of power electronic devices

Multi-objective hydrothermal performance optimization of a microchannel heat sink equipped with delta winglet vortex generators using NSGA-II genetic algorithm

Three-dimensional numerical investigation of hybrid nanofluids in chain microchannel under electrohydrodynamic actuator

Multi-objective optimization of a hybrid nanofluid jet impinging on a microchannel heat sink with semi-airfoil ribs based on field synergy principle

Investigation of Nanofluid Heat Transfer in a Microchannel Under Magnetic Field Via Lattice Boltzmann Method: Effects of Surface Hydrophobicity, Viscous Dissipation, and Joule Heating

Multimodal machine learning for predicting heat transfer characteristics in micro-pin fin heat sinks