Abstract:The advancement of industrial robot technology has opened up a new direction for stone sculpture machining. However, whether through traditional hand carving or modern industrial robotic grinding, a significant amount of natural stone must be removed, typically in the form of stone powder. This process not only decreases machining efficiency but also results in the wastage of stone resources due to the generation of stone powder, which can negatively impact the ecological environment. In order to enhance the efficiency of stone sculpture machining while reducing natural stone waste and environmental pollution, a method for the efficient and green sawing of natural stone sculptures using industrial robots is proposed. First, based on the processing characteristics of diamond wire saw, a mathematical model is developed for the ruled surface generated by the saw's movement and its corresponding compensated surface. Second, with the contour curve of the model as the directrix, an enveloping ruled surface is generated. Next, the minimum volume ruled surface model is generated by Boolean operation using the enveloping ruled surface and the model bounding box. Then, the contour curve corresponding to the minimum volume ruled surface model (the directrix of the envelope ruled surface) is utilized as the machining path for an integrated robotic diamond wire cutting system. A ruled surface model of Stanford Bunny was obtained by sawing a marble block using the robotic diamond wire cutting system. The experimental results show that the material removal rate of the robotic diamond wire cutting is 1.37 times that of saw blade cutting and 2.30 times that of grinding. The volume of stone powder generated during the processing was 0.16 × 107mm3, accounting for only 1.47% of the total stone powder produced during the grinding process. In summary, the proposed method not only enhances processing efficiency but also reduces natural stone waste and mitigates environmental pollution.

Structural design for a hybrid stone carving manipulator

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

The Modeling and Visual Control Simulation of Articulated Serpentine Manipulator

Mechanical Design of a Novel 4DOF Serial Manipulator

Conceptual Design and Kinematic Optimization of a Gantry Hybrid Machining Robot

Type synthesis of 5-DOF redundantly actuated parallel robots for super-large components with complicated surfaces.

Type Synthesis and Trajectory Planning of 5-DOF Redundantly Actuated Parallel Robots with Large Output Rotational Angles for Large Workpieces

Research on machining error prediction and compensation technology for a stone-carving robotic manipulator

A Mobile Hybrid Robot and Its Accuracy Issue in Machining of Large-Scale Structures

The structural design and simulation of the tubing handling manipulator

Configuration Design and Evaluation of Bionic Grinding Manipulator Based on Human Upper Limb

Design and Analysis of a Novel Hybrid Processing Robot Mechanism

Research on Configuration Design Optimization and Trajectory Planning of Manipulators for Precision Machining and Inspection of Large-Curvature and Large-Area Curved Surfaces

Design of a Mobile Manipulator for Curtain Wall Installation

An industrial robot based sawing method for natural stone sculpture

Modeling and design optimization of master manipulator for robot-assisted minimally invasive surgery

Optimization Design of a Novel 4-DOF Parallel Manipulator

Kinematics, dynamics and multi-objective optimization based on singularity-free task workspace for a novel SCARA parallel manipulator

Analysis and Dimensional Design of a Novel Hybrid Machine Tool

The structure design and kinematics analysis of the manipulator for the upper port remote maintenance in DEMO

Structure Design and Solution of Kinematics of Robot Manipulator for 3D Concrete Printing