Abstract:The preparation process and stress analysis of hybrid printed plastic/metal joint. Printing polymers on metal surfaces using fused deposition modeling could enhance the versatility of hybrid structures. However, the differences between metals and plastics prevented the effective spreading of molten plastic on metal surfaces, challenging reliable plastic printing on metal substrates. This study employed a nanosecond laser to fabricate laser‐textured grids of varying widths (0.2–0.5 mm) on a 6061 aluminum alloy (6061Al) surface. Carbon fiber reinforced thermoplastic plastic (CFRTP) was printed on 6061Al surface in different printing directions (0°, 45°, and 90°). The influence of laser texturing and printing direction on joint performance was evaluated. The findings indicated the laser‐texturing increased 6061Al surface roughness, enhancing wettability of CFRTP on 6061Al surface. The 45° printing direction provided the best wetting, resulting in a tensile‐shear force of 1631.7 N, 218% higher than at 90°. Optimal performance was achieved with a 0.5‐mm texture width, increasing tensile‐shear force by 180% compared to 0.2 mm and 67% compared to 0.6 mm. Interfacial stress concentration decreased and then increased with the increase of laser‐textured width and the 45° printing direction provided the longest print path and best resin spreading. This research presented a novel approach to metal‐polymer joining, with significant implications for advanced lightweight hybrid structures. Highlights Printing carbon fiber reinforced thermoplastic plastic (CFRTP) on 6061 aluminum alloy (6061Al) surface was achieved by fused deposition modeling via laser texturing. The print direction affected the wetting and spreading space of the molten resin. Pinning effect of printed CFRTP/6061Al by laser texturing was studied. The spreading and wetting of resin determined the mechanical properties.

Femtosecond laser fabricated micro/nano interfacial structures to strengthen CFRPEEK/A6061-T6 FLJ hybrid joints

Adhesion Enhancement of PEEK/6161-T6 FLJ Joints Via Laser Surface Modification

Achievement of High-strength Al/CFRP Hybrid Joint Via High-speed Friction Stir Lap Joining and Laser Texturing Pretreatment Parameters Variation

Biomimetic papilla texture by femtosecond laser for high-strength CFRTP/A6061-T6 FSSW hybrid structures

Interlayer bonding improvement of PEEK and CF-PEEK composites with laser-assisted fused deposition modeling

Enhanced interfacial joining strength of laser wobble joined 6061-T6 Al alloy/CFRTP joint via interfacial bionic textures pre-construction

Nanosecond laser ablation for improving the strength of CFRTP and aluminum alloy adhesively bonded joints

Comparison of the effects of femtosecond and nanosecond laser tailoring on the bonding performance of the heterojunction between PEEK/CFRP and Al–Li alloy

Optimization of Friction Lap Joining Parameters and Exploration Connection Mechanism of CFRPA6/6061-T6 Aluminum Alloy Hybrid Structures

Optimization of microstructural morphology via laser processing to enhance the bond strength of Al-CFRP

Improving the interfacial bonding strength and suppressing shrinkage porosity of 6061Al/GFRTP hot-pressing joints via interfacial modification

Study on microstructures and mechanical performance of laser transmission welding of poly-ether-ether-ketone (PEEK) and carbon fiber reinforced PEEK (CFR-PEEK)

Influence of laser texturing on the properties of fusion joints between aluminum alloys and carbon fiber reinforced thermoplastic composites

Bi-scale Interfacial Bond Behaviors of CCF/PEEK Composites by Plasma-Laser Cooperatively Assisted 3D Printing Process

Laser Joining of Continuous Carbon Fiber-Reinforced PEEK and Titanium Alloy with High Strength

Robust Heterojunctions of Metallic Alloy and Carbon Fiber-Reinforced Composite Induced by Laser Processing

Direct printing of carbon fiber reinforced thermoplastic plastic on metal sheets via fused deposition modeling assisted by laser texturing

Parameter optimization of friction stir spot welded Al 6061 and CFRTP PA6 with surface treatment and interfacial adhesion

Enhancing interfacial bonding in friction stir lap welding of light metal and carbon fiber reinforced polymer composite

Effect of Groove Configuration on Mechanical Properties and Fracture Behavior of 6061 Al Alloy and CFRTP Laser Joint

Achieving a Strong Friction‐Lap Joint of Continuous Carbon‐Fiber‐Reinforced Plastic/Aluminum Alloy via a Surface Laser‐Processing Pretreatment