Reservoir Characteristics of the Lower Permian Marine-Continental Transitional Shales: Example from the Shanxi Formation and Taiyuan Formation in the Ordos Basin

H. Wang,L. Zhang,Q. Zhao,Z. Qiu,D. Liu,Q. Zhang,Y. Wang,D. Dong
DOI: https://doi.org/10.1155/2021/9373948
IF: 2.006
2021-12-07
Geofluids
Abstract:The pore types and pore structure parameters of the heterogenetic shale will affect the percolation and reservoir properties of shale; therefore, the research on these parameters is very important for shale reservoir evaluation. We used X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), low-pressure CO2 adsorption analysis, mercury injection capillary pressure (MICP), and high-pressure methane adsorption analysis to analyze the characteristics of different pore types and their parameters of the Lower Permian Shanxi Formation and Taiyuan Formation in the Ordos Basin. The influence of different mineral contents on the porosity and pore size is also investigated. The Shanxi Formation (SF) is composed of quartz (average of 38.4%), plagioclase, siderite, Fe-dolomite, calcite, pyrite, and clay minerals (average of 50.1%), while the Taiyuan Formation (TF) is composed of calcite (average of 37%), siderite, Fe-dolomite, quartz, pyrite, and clay minerals (average of 32.3%). The most common types of pores observed in this formation are interparticle pores (InterP pores), intraparticle pores (IntraP pores), interclay pores, intercrystalline pores (InterC pores), organic matter pores (OM pores), and microfractures. CO2 adsorption analysis demonstrates the type I physisorption isotherms, showing microporous solids having comparatively small external surfaces. The similar types of isothermal shapes of the Shanxi Formation (SF) and Taiyuan Formation (TF) suggest that both types have similar pore size distribution (PSD) within the measured pore range by the low-pressure CO2 adsorption experiment. The micropore pore size of the TF is larger than that of the SF. MICP shows the larger pores (>50 nm), and most of the volume was adsorbed by macropores. Methane gas sorption capacity increases with increasing pressure. Clay minerals and quartz played an important role in providing adsorption sites for methane gas. The overall analysis of both formations shows that TF has good reservoir properties than SF.
geochemistry & geophysics,geology
What problem does this paper attempt to address?
The problem that this paper attempts to solve is about the reservoir characteristics and their evaluation of the Carboniferous - Permian transitional facies shale in the Ordos Basin. Specifically, the research aims to evaluate the reservoir characteristics of the Lower Permian Shanxi Formation and Taiyuan Formation shales by analyzing different pore types and their parameters. These parameters are very important for the evaluation of shale gas reservoirs, because pore types and pore structure parameters will affect the seepage and reservoir properties of shale. ### Main research questions: 1. **Analysis of pore types and pore structure parameters**: Through X - ray diffraction (XRD), scanning electron microscopy (SEM), low - pressure CO2 adsorption analysis, mercury injection capillary pressure (MICP) analysis and high - pressure methane adsorption analysis, study different types of pores and their parameters in the Shanxi Formation and Taiyuan Formation shales. 2. **The influence of mineral content on porosity and pore diameter**: Explore the influence of different mineral contents on porosity and pore diameter. 3. **Comprehensive evaluation of reservoir characteristics**: Through the comprehensive evaluation of the above - mentioned analysis results, determine the reservoir characteristics of the Shanxi Formation and Taiyuan Formation shales. ### Research background: - **The importance of unconventional oil and gas resources**: Shale gas resources play an important role in global energy demand, especially in the case of the gradual depletion of conventional oil and gas resources. - **Geological background of the Ordos Basin**: The Ordos Basin is located in the western part of the North China Platform in China. It is a rectangular sedimentary basin with an area of about 370,000 square kilometers. The basin has experienced four tectonic evolution stages and formed a rich carbonate rock sequence. - **Characteristics of the Shanxi Formation and Taiyuan Formation**: The Shanxi Formation and Taiyuan Formation have thick sequences, medium maturity, high total organic carbon (TOC) content and good gas reservoir potential. ### Research methods: - **X - ray diffraction analysis (XRD)**: Used to identify the whole - rock mineral composition. - **Scanning electron microscopy (SEM)**: Used to observe the comparative characteristics of different minerals and the distribution of micro - nano pores, micro - fractures and organic matter. - **Low - pressure CO2 adsorption analysis**: Used to study the pore size distribution, pore volume and specific surface area of micropores (< 2 nm). - **Mercury injection capillary pressure analysis (MICP)**: Used to measure the pore size distribution of macro - pores (> 50 nm). - **High - pressure methane adsorption analysis**: Used to study the adsorption capacity of methane gas. ### Results and discussion: - **Mineral composition**: The Shanxi Formation is mainly composed of quartz (average 38.4%), plagioclase, siderite, ankerite, calcite, pyrite and clay minerals (average 50.1%); the Taiyuan Formation is mainly composed of calcite (average 37%), siderite, ankerite, quartz, pyrite and clay minerals (average 32.3%). - **Pore types**: The main pore types observed include inter - particle pores (InterP pores), intra - particle pores (IntraP pores), inter - clay pores, inter - crystalline pores (InterC pores), organic matter pores (OM pores) and micro - fractures. - **Pore structure parameters**: CO2 adsorption analysis shows that the isothermal adsorption curves of both shales are type I physical adsorption isotherms, indicating that the microporous solid has a small outer surface. MICP analysis shows that the pore size distribution of the Taiyuan Formation is wider than that of the Shanxi Formation, and most of the volume is adsorbed by macro - pores. - **Reservoir characteristics**: Comprehensive analysis shows that the reservoir characteristics of the Taiyuan Formation are better than those of the Shanxi Formation. Through these studies, the authors hope to provide a scientific basis for the evaluation of shale gas reservoirs, thereby promoting the effective development of unconventional oil and gas resources.