Abstract:The aim of this study was to evaluate the effect of alumina (Al2O3) additive and sintering temperature on the microstructural, physical, mechanical, and in vitro bioactivity properties of hydroxyapatite (HA). The composites consisting of 2.5 and 5 wt% Al2O3 and monolithic HA were uniaxially pelleted at 350 MPa with the size of ∅11 and 11 mm2 and sintered at five different temperatures ranging from 900 to 1300 °C for 4 h. A series of thermal analysis methods and tests were used to evaluate both phase changes that occurred during sintering and the physical/mechanical properties of the sintered samples. The bioactivity property of the samples having the highest compressive strength value was investigated in a simulated body fluid (SBF) solution for 3, 7, 15, and 30 days. Results showed that HA without Al2O3 had started to decompose at 1200 °C, and the addition of Al2O3 led to the reduction of decomposition temperature from 1200 to 900 °C. However, the main phase was HA for all the sintered samples. The highest mechanical strength values were 130.20 ± 6.22, 60.27 ± 9.93, and 0.96 ± 0.05 MPa m1/2 for compressive strength, three-point bending strength, and fracture toughness, respectively, for monolithic HA when it was sintered at 1100 °C. All of these mechanical strength values of monolithic HA were improved higher than the rate of 60% as the grain growth of HA was inhibited by the addition of Al2O3. The highest mechanical strength values of HA–Al2O3 composites were obtained for the samples sintered at 1200 °C when the densification rate reached 90%. In vitro investigations showed that Al2O3 led to a reduction in the in vitro bioactivity of HA, but it could be used in the human body since its surface is coated by apatite layers when in vitro time reached 30 days.

Fluoridation and sintering of hydroxyapatite material and their mechanical properties

Fluoridation and Mechanical Properties of Hydroxyapatite with Addition of TiF<sub>3</sub>, Al<sub>2</sub>O<sub>3</sub> and Fe<sub>2</sub>O<sub>3</sub> by Sintering

[Wet Synthesis and Characterization of Fluoride-Substituted Hydroxyapatite].

Synthesis of Boronized Ti6Al4V/FHA Composites by Microwave Sintering for Dental Applications

Effect of Hydroxyapatite on Sinterability, Mechanical Properties, and Bioactivity of Chemically Synthesized Alumina–Zirconia Composites

Fluoridation of Synthetic Apatite: Effect on the Formation of Calcium-Deficient Hydroxyapatite and the Properties of Porous Scaffold

Characterization, mechanical properties, corrosion behaviour and bone-like apatite formation ability of fluorine substituted hydroxyapatite coating

Effects of the sintering process on the different properties of alumina/hydroxyapatite nanobiocomposites

Coatings of needle/stripe-like fluoridated hydroxyapatite on H2O2-treated carbon/carbon composites prepared by induction heating and hydrothermal methods

Mechanical Properties of ZrO<sub>2</sub> (Y<sub>2</sub>O<sub>3</sub>)-Al<sub>2</sub>O<sub>3</sub> Nanocomposites with Addition of Hydroxyapatite Prepared by Spark Plasma Sintering

The effect of alumina additive and sintering temperature on the microstructural, physical, mechanical, and bioactivity properties of hydroxyapatite–alumina composites

Effects of Sintering Temperature on the Properties of Alumina/hydroxyapatite Composites

Microwave-Assisted Solid-State Synthesis of Fluorinated Hydroxyapatite

Dense alumina-based carbonated fluorapatite nanobiocomposites for dental applications

Effect of Process Parameters on the Microstructure and Property of Hydroxyapatite Precursor Powders and Resultant Sintered Bodies

Synthesis of Ti6Al4V/SrFHA Composites by Microwave-Assisted Liquid Phase Deposition and Calcination

Synthesis and Characterization of Fluorine-Substituted Hydroxyapatite Powder by Polyacrylamide-Gel Method

Evaluation of adhesion strength and toughness of fluoridated hydroxyapatite coatings

Crystallization Characteristics and Thermal Stability of Fluor-Hydroxyapatite Composites with Zirconia

Mechanical Properties of ZrO<sub>2</sub> (Y<sub>2</sub>O<sub>3</sub>)-Al<sub>2</sub>O<sub>3</sub> Nanocomposites with Addition of Hydroxyapatite Prepared by Spark Plasma Sintering

Mechanical performance and in-vitro biological behaviors of boronized Ti6Al4V/HA composites synthesized by microwave sintering

Fluoridation and sintering of hydroxyapatite material and their mechanical properties

Fluoridation and Mechanical Properties of Hydroxyapatite with Addition of TiF<sub>3</sub>, Al<sub>2</sub>O<sub>3</sub> and Fe<sub>2</sub>O<sub>3</sub> by Sintering

[Wet Synthesis and Characterization of Fluoride-Substituted Hydroxyapatite].

Synthesis of Boronized Ti6Al4V/FHA Composites by Microwave Sintering for Dental Applications

Effect of Hydroxyapatite on Sinterability, Mechanical Properties, and Bioactivity of Chemically Synthesized Alumina–Zirconia Composites

Fluoridation of Synthetic Apatite: Effect on the Formation of Calcium-Deficient Hydroxyapatite and the Properties of Porous Scaffold

Characterization, mechanical properties, corrosion behaviour and bone-like apatite formation ability of fluorine substituted hydroxyapatite coating

Effects of the sintering process on the different properties of alumina/hydroxyapatite nanobiocomposites

Coatings of needle/stripe-like fluoridated hydroxyapatite on H2O2-treated carbon/carbon composites prepared by induction heating and hydrothermal methods

Mechanical Properties of ZrO&lt;sub&gt;2&lt;/sub&gt; (Y&lt;sub&gt;2&lt;/sub&gt;O&lt;sub&gt;3&lt;/sub&gt;)-Al&lt;sub&gt;2&lt;/sub&gt;O&lt;sub&gt;3&lt;/sub&gt; Nanocomposites with Addition of Hydroxyapatite Prepared by Spark Plasma Sintering

The effect of alumina additive and sintering temperature on the microstructural, physical, mechanical, and bioactivity properties of hydroxyapatite–alumina composites

Effects of Sintering Temperature on the Properties of Alumina/hydroxyapatite Composites

Microwave-Assisted Solid-State Synthesis of Fluorinated Hydroxyapatite

Dense alumina-based carbonated fluorapatite nanobiocomposites for dental applications

Effect of Process Parameters on the Microstructure and Property of Hydroxyapatite Precursor Powders and Resultant Sintered Bodies

Synthesis of Ti6Al4V/SrFHA Composites by Microwave-Assisted Liquid Phase Deposition and Calcination

Synthesis and Characterization of Fluorine-Substituted Hydroxyapatite Powder by Polyacrylamide-Gel Method

Evaluation of adhesion strength and toughness of fluoridated hydroxyapatite coatings

Crystallization Characteristics and Thermal Stability of Fluor-Hydroxyapatite Composites with Zirconia

Mechanical Properties of ZrO<sub>2</sub> (Y<sub>2</sub>O<sub>3</sub>)-Al<sub>2</sub>O<sub>3</sub> Nanocomposites with Addition of Hydroxyapatite Prepared by Spark Plasma Sintering

Mechanical performance and in-vitro biological behaviors of boronized Ti6Al4V/HA composites synthesized by microwave sintering

Mechanical Properties of ZrO<sub>2</sub> (Y<sub>2</sub>O<sub>3</sub>)-Al<sub>2</sub>O<sub>3</sub> Nanocomposites with Addition of Hydroxyapatite Prepared by Spark Plasma Sintering