Abstract:_ This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 211546, “Intelligent Pipe: A Multiannuli Monitoring Solution,” by Francois-Xavier Bulard, Vallourec; Emmanuel Tavernier, OpenField Technology; and Lucas Kling, Vallourec. The paper has not been peer reviewed. _ The authors describe a multiannular monitoring solution that measures pressure and temperature for each well annulus. These key parameters are captured by sensors based on microelectromechanical-system technology. A transmission methodology is used that allows power supply and data retrieval even for annuli beyond the B annulus. All electronic elements of the solution will be qualified through an international recommendation protocol [Advanced Well Equipment Standards (AWES)] that consists of a series of mechanical and long-term tests to ensure that the system will survive for 20 years at 125°C. The solution could be used in all storage applications, especially those related to the energy transition. Introduction The initial goal of the intelligent-pipe solution was to add functionality to tubulars by embedding miniaturized sensors into the pipe body. The secondary objective was to monitor the pipe’s environment to properly characterize well loads and compare them to its strength resistance. The main application of the solution was then to monitor annulus conditions in real time during the whole life of the well and to anticipate any leakage or annular-pressure-buildup issue that could not be monitored currently on subsea wells. A tubular design was developed to incorporate pressure and temperature sensors without affecting the integrity of the pipe. The design was verified by a testing protocol performed by an in-house testing laboratory. This protocol consisted, first, of finite-element analysis (FEA) performed on different tubular designs with the objective of optimizing the different shapes of the grooves created to incorporate the sensors. The second steps included physical tests performed on a specimen inside test frames that confirmed that the tubular integrity was not affected after several pressure and axial load cycles, even when applying maximum pipe-resistance loads. This mechanical test qualification demonstrated that the monitoring mandrel was able to withstand the constraints observed in a well. The qualification level achieved was the same as that achieved on the premium pipe connection. Much of the complete paper is dedicated to the development of the permanent solution; this synopsis focuses on the system’s pilot deployment and its global system qualification. First Deployment in a Deepwater Subsea Well The operator’s objective was to monitor several annuli of a subsea well to determine the effect of completion operations. This characterization was completed before the well-production phase. The main outputs of the pilot were annuli trapped pressure and temperature. The pilot was defined initially in two stages. The first was to monitor the B and C annuli conditions (pressure and temperature) immediately after casing deployment. The second was to do so again after running completions and various stimulation operations. A secondary objective was to retrieve historical sensor data, pressure, and temperature records from the time of sensor deployment to data-retrieval operation.

First Permanent Inflow Monitoring Experience in a Smart-Liner, Intelligent-Completion, Multi-Lateral Adnoc Offshore Well

Full Analytical Modeling Of Intrawell Chemical Tracer Concentration For Robust Production Allocation In Challenging Environments

A Game Changer Data Acquisition Technology : Field Wide Gaslift Optimization through the Application of Welltracer Technology in a Mature Offshore Field

Bullhead Stimulation and First Real-Time Fiber-Optic Surveillance in Extended-Reach Horizontal Laterals to Maximize Reservoir Recovery in a Giant Offshore Carbonate Oil Field Abu Dhabi

Identification & Mapping of Water Slumping Fronts by Ultra-Deep Electromagnetic Logging While Drilling Technology in Lower Cretaceous Reservoirs of Adnoc Onshore

Evaluation of the Release Mechanism of Sustained-Release Tracers and its Application in Horizontal Well Inflow Profile Monitoring

Reservoir Description Insights from Inter-well Gas Tracer Test

Three-Phase Flow Profile Determination of A Horizontal Well in Offshore by Tracer Technology

Using New Intervention-less Surveillance Technology to Optimize the Implementation of Waterflood

Overview of Tracer Applications in Oil and Gas Industry

Multiannuli Solution Uses Intelligent Pipe for Real-Time Monitoring

An Intelligent Artificial Lift Technology and its Trial in Middle East: Integration of Remote Wireless Control and Artificial Automation for Zonal Water Injection

Interwell Connectivity Study

Technology Focus: Production Monitoring (March 2023)

Ultra–deep Resistivity Technology as a Solution for Efficient Well Placement; Geosteering and Fluid Mapping to Reduce Reservoir Uncertainty and Eliminate Pilot Hole-First Time in Offshore Abu Dhabi, UAE

Application of Isotope Tracer in Cross-Well Nanometre Tracer Testing

Multi Zone Smart Well Completions Challenges in Highly Deviated Wells and Its Impact on Well Planning and Field Development

Downhole Surveillance During the Well Lifetime Using Distributed Temperature Sensing

The Development of Advanced Fluorescent Tracers Aimed at Drill Cuttings Labelling and Depth Correlation via Injection with Oil-Based Drilling Mud

Application of Successful New Downhole Fluid Sampling Technique in Ultra Low Permeability Reservoir in Abu Dhabi Onshore

14 C-AMS TECHNOLOGY AND ITS APPLICATIONS TO AN OIL FIELD TRACER EXPERIMENT