Abstract:The increasing demands of oil energy has created burden on conventional oil recovery methods because of which use of synthetic chemicals is increasing and creating significant health and environmental issues. Therefore, this study reports the synthesis of alkali-surfactant-polymer (ASP) slug with the use a natural surfactant and natural polymer as an alternate for foaming in saline environment of chemical-EOR applications. The natural surfactant (used at CMC level) derived from fenugreek seeds and guar gum (4000 ppm) was used as natural polymer, while the concentration of NaHCO 3 (alkali) was tuned to curtail the impact of salt-ions on foam-ability of ASP slug for practical applications. It was observed that a stable air foam developed in saline medium due to the synergistic interaction between alkali-polymer. The desired ASP slug (nomenclature: 0.5ASP1) of 0.5 wt% alkali, 0.2 wt% surfactant (CMC), and 4000 ppm guar gum was developed after significant tuning in alkali concentration as per the variation in NaCl concentration (1–8 wt%). The desired slug 0.5ASP1 showed significant foaming potential till NaCl concentration of 2 wt% as demonstrated by superior foam height of 139.8 mm at span of 60 s which was only 113.4 mm for ASP slug (at salinity 2 wt%). The presence of alkali, capable of generating in-situ surfactant, and inclusion of additional natural surfactant in ASP formulation (0.5ASP1) resulted into minimum SFT of 38 mN/m and contact angle of 54°. This indicates a favorable impact of ASP slug on wettability alteration of reservoir rock and making them more water-wet. Microscopic investigations were also conducted to visualize packing and coverage of foam bubbles stabilized by 0.5ASP1 and ASP slugs. 0.5ASP1 slug sustained bubbles for longer duration than ASP slug. The results concluded that inclusion of natural derivative in form of surfactant and polymer along with inexpensive alkali makes ASP slug a green alternative for practical applications such as oil recovery, crude emulsification, CO 2 foams, and IFT reduction.

A novel sodium N-fatty acyl amino acid surfactant using silkworm pupae as stock material

Synthetic Ultra-Long Chain Fatty Acyl Based Amphiphilic Lipids As A Dual Function Excipient for the Production of Surfactant-Free Solid Lipid Nanoparticles (Sf-Slns): A Physico-Chemical Study

Synthesis and characterization of silk fibroin/acrylic acid/acrylamide superabsorbent polymer

Multiporous Microstructure for Enhancing the Water Absorption and Swelling Rate in Poly(sodium Acrylic Acid) Superabsorbent Hydrogels Based on a Novel Physical and Chemical Composite Foaming System

New Research on Application of Silkworm Pupa

Synthesis and Emulsification Properties of Organosilicone Modified Sodium Sulfonate of Alkanolamide Succinic Acid Monoester with Palm Oil

Formulation and stability of silkworm pupae oil microemulsion

Synthesis of Fatty Alcohol Ether Carboxylic Ester Surfactant and its Performance in an Anionic/Non-Ionic Mixed System

Characterization and Surface Active Properties of Aliphatic Glycerol Acetal Disodium Sulfosuccinates

Synthesis of Branched Surfactant Via Ethoxylation of Oleic Acid Derivative and Its Surface Properties

Production and Characterisation of High-Quality Silkworm Pupal Oil for Omega-3 Fatty Acid Supplementation

Sustainable Transportation, Leaching, Stabilization, and Disposal of Fly Ash Using a Mixture of Natural Surfactant and Sodium Silicate

Application of Aqueous Saline Process to Extract Silkworm Pupae Oil (Bombyx mori): Process Optimization and Composition Analysis

Design and performance evaluation of Alkaline-Surfactant-Polymer slug of a natural surfactant of fenugreek in saline media for Foaming/Emulsification applications

Synthesis of no-PFOA type amino acid fluorocarbon surfactant and the performance tests

Facile acid fermentation extraction of silkworm pupae oil and evaluation of its physical and chemical properties for utilization as edible oil

Microfluidic fatty acid rearrangement in silkworm pupae oil with magnetically responsive lipase under continuous-flow condition

Preparation of a Fluorocarbon Polymerizable Surfactant and Its Application in Emulsion Polymerization of Fluorine-Containing Acrylate

A New Zwitterionic Surfactant with High Interfacial Activity and High Salt Tolerance Derived from Methyl Oleate Through an Eco‐friendly Aryl‐introducing Method

Synthesis and properties of novel betaine fluorocarbon surfactants

Two-step enzymatic synthesis of α-linolenic acid-enriched diacylglycerols with high purities from silkworm pupae oil