Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The accuracy of machining can be predicted during the design process of CNC machine tools, while the prediction accuracy depends on the prediction model. However, when establishing the prediction model, the coupling effect among the machine tool's different components is always ignored for modeling efficiency, so this will lead to its reliability cannot be guaranteed. To address this problem, the model reduction theory and the lumped parameter method are used in this study to set the state-space equations of the essential structural parts. Moreover, the electro-mechanical coupling parameter equation of the servo system is transformed into a state-space equation. Then the state-space equations of the components and the servo system are coupled to establish the machine tool dynamic model. Furthermore, a theoretical model of instantaneous undeformed chip thickness is found, and according to the linear relationship between the micro-cutting force and the instantaneous undeformed chip thickness, the instantaneous cutting force model of the cylindrical milling cutter is established. Based on these, the integrated model, which considers the mechanical structure, control system and cutting force, is obtained and further used in Simulink to build the machining accuracy prediction platform, as well as the accuracy of the integrated prediction model is verified. Moreover, the prediction model established by the integrated modeling method can effectively simulate the actual machining conditions of the machine tool, and the superiority of prediction is confirmed by comparing the simulated and measured results in peripheral milling applications. The results show the error in the system response efficiency is 14.8%, while the error in position accuracy and delay characteristics is less than 10%, the error between the predicted size of the prediction model and the actual size is within 28 μm, a minimum prediction error is 7 μm.

Machining cycle time prediction: Data-driven modelling of machine tool feedrate behavior with neural networks

Accurate Prediction Of Machining Feedrate And Cycle Time Prediction Considering Interpolator Dynamics

Accurate prediction of machining feedrate and cycle times considering interpolator dynamics

Adaptive Neural Network for Dynamic Prediction of Machine Tool Energy Consumption

Kinematic modelling of a 3-axis NC machine tool in linear and circular interpolation

A Time-Series Data-Driven Method for Milling Force Prediction of Robotic Machining

Intelligent prediction and simulation of tool wear in CNC turning system

Milling wear prediction using an artificial neural network model

A New Error Prediction Method for Machining Process Based on a Combined Model

Machining accuracy prediction and adaptive compensation method of CNC machine tool under absence of machining process sensing

A deep learning model for online prediction of in-process dynamic characteristics of thin-walled complex blade machining

An Integrated Model Based Prediction of Machining Accuracy for Milling Machine

Using Neural Networks for Tool Wear Prediction in Computer Numerical Control End Milling

Predictive Force Model Based Variable Feedrate Scheduling for High-Efficiency NC Machining

Qualified Rate Prediction of Typical Workpieces in Discrete Manufacturing Process

Data-driven tool wear prediction in milling, based on a process-integrated single-sensor approach

Modeling of Feed-Rate Prediction for Small Segment in High Speed Machining

Improving milling tool wear prediction through a hybrid NCA-SMA-GRU deep learning model

Feature signature prediction of a boring process using neural network modeling with confidence bounds

Accurate prediction and compensation of machining error for large components with time-varying characteristics combining physical model and double deep neural networks

A Data-Driven Method for Prediction of Surface Roughness with Consideration of Milling Tool Wear