Abstract:In the present study, we report the synthesis, characterization and assessment of the carbon dioxide adsorption capacity of a composite made of boron nitride and carbon. The material is obtained through a two-step process. In the initial step, ammonia borane is introduced into the porosity of a zeolitic imidazolate framework (ZIF-8) using a novel one-pot synthesis method. The ZIF-8 is formed in situ around the ammonia borane molecules, eliminating the need for an infiltration step. The successful confinement of ammonia borane within the ZIF-8 structure is verified through different characterization techniques (IR, XRD, TGA-DSC, 11B MAS NMR). In the second step, the ZIF-8 containing confined ammonia borane is pyrolyzed. Ammonia borane acts as a precursor of boron nitride and the process results in a composite comprised of carbon, boron and nitrogen. The composite was subsequently characterized and evaluated as a potential adsorbent for carbon dioxide. With a specific surface area of 56 m2 g-1, the composite demonstrates a CO2 uptake of 1.94 mmol g-1 (or 85.4 mg g-1) when exposed to 1.5 bar of CO2 at 30°C. This value surpasses reported capacities of other boron nitride-based materials as CO2 adsorbents. When comparing the CO2 adsorption capacity in terms of the specific surface area, a significant enhancement is observed (3410-3 mmol m-2). This suggests that the material provides more active sites for CO2 adsorption, such as polarized B─C, B─N, and C─N bonds. This key factor may be even more important than having a large specific surface area. Therefore, the potential for developing new boron-based materials with enhanced CO2 adsorption capacities lies in increasing both specific surface area and active sites.

Preparation and characterization of boron nitride/carbon fiber composite with high specific surface area

Preparation and imidization of polyimide composites filled with boron nitride

Preparation and characterization of t-BN coatings on the surface of carbon fibers

Preparation of Boron Nitride-Coated Carbon Fibers and Synergistic Improvement of Thermal Conductivity in Their Polypropylene-Matrix Composites

Preparation of High Surface Area Nano-Structured Graphene Composites

Construction of 3D nanostructures on carbon fiber surfaces by sizing for preparing high‐performance composites

Surface Growth of Boron Nitride Nanotubes Through Boron Source Design

Preparation of High-Surface-area Carbon Nanoparticle/graphene Composites

A boron nitride – carbon composite derived from ammonia borane and ZIF-8 with promises for the adsorption of carbon dioxide

Large-scale Fabrication of Boron Nitride Nanotubes and Their Application in Thermoplastic Polyurethane Based Composite for Improved Thermal Conductivity

Growth of Boron Nitride Nanotube Over Al-Based Active Catalyst and its Application in Thermal Management

Carbon nanotube mat/boron nitride composite materials for aerospace applications

A facile strategy to prepare boron nitride grafted carbon nanotubes coating for CF/ PEEK composites interfacial enhancement

Biomass-directed synthesis of 20 g high-quality boron nitride nanosheets for thermoconductive polymeric composites.

Simultaneous Exfoliation and Functionalization of Large-sized Boron Nitride Nanosheets for Enhanced Thermal Conductivity of Polymer Composite Film

Shear-Assisted Production of Few-Layer Boron Nitride Nanosheets by Supercritical CO2 Exfoliation and Its Use for Thermally Conductive Epoxy Composites

Thermal Conductive Composites Reinforced Via Advanced Boron Nitride Nanomaterials

The Properties and Preparation Methods of Different Boron Nitride Nanostructures and Applications of Related Nanocomposites

Growth of Boron Nitride Nanotubes from Magnesium-Based Catalysts

Preparation of Boron Nitride Nanosheet-Coated Carbon Fibres and Their Enhanced Antioxidant and Microwave-Absorbing Properties

A facile method to prepare oriented boron nitride-based polymer composite with enhanced thermal conductivity and mechanical properties