Abstract:Abstract Multilayer adhesive bonded structures/materials (MABS) are widely used as structural components, especially in the field of aerospace. However, for MABS workpieces, the facts that the weak echo of the deep interfacial debonding defects (DB) caused by the large acoustic attenuation coefficient of each layer and this echo, which generally aliases with the excitation wave and the backwall echo of the surface layer, pose a great challenge for the conventional longitudinal wave ultrasonic nondestructive testing methods. In this work, an ultrasonic resonance evaluation method for deep interfacial DBs of MABS is proposed based on the ultrasonic resonance theory and the aliasing effect of ultrasonic waves in MABS. Theoretical and simulation analysis show that the optimal inspection frequency for II-interfacial DBs is 500 kHz when the shell thickness is 1.5 mm and the ethylene propylene diene monomer (EPDM) thickness is 1.5 mm, and the optimal inspection frequency is 250 kHz when the shell thickness is 1.5 or 2.0 mm and the EPDM thickness is 2.0 mm. Verification experiments show that the presence of a DB in the II-interface causes a resonance effect, and in the same inspection configuration, the larger the defect size, the more pronounced this effect is. This resonance effect manifests itself as an increase in the amplitude and an increase in the vibration time of the A-scan signal as well as a pronounced change in the frequency of the received ultrasonic wave. In addition, the increase in the excitation voltage further highlights the ultrasonic resonance effect. Four imaging methods – the integrations of the signal and the signal envelope curve, the maximum amplitude of the fast Fourier transform (FFT) of the signal, and the signal energy – were used for C-scan imaging of ultrasonic resonance evaluation of MABS’s deep interfacial DBs and all these methods can clearly show the sizes and locations of the artificial defects and internal natural defect. The normalized C-scan imaging method proposed in this study can further highlight the weak changes in the signals in the C-scan image. The research results of this study have laid a solid theoretical and practical foundation for the ultrasonic resonance evaluation of MABS.

Ultrasonic near-surface contact imaging of foam-based hybrid composite materials

Ultrasonic assessment of bonding integrity in foam-based hybrid composite materials

Surface Wave Transducer for Ultrasonic Nondestructive Testing of Polymer Components

Contactless Inspection of CFRP Artificial Disbonds Using Combined Laser Thermography and Laser Ultrasonics with Optical Microphone

Ultrasonic guided wave monitoring of composite wing skin-to-spar bonded joints in aerospace structures

Applications of Thermography and Ultrasonics for Detection of Debonding in Carbon Fibre Reinforced Composite Panels

Nondestructive Evaluation of Bond Quality of Adhesively Joined Carbon Fiber/nylon 6 Composites

Comparative Study of Ultrasonic Techniques for Reconstructing the Multilayer Structure of Composites

Non-contact detection of the interfacial microdefects in metal/CFRP hybrid composites using air-coupled laser ultrasound

Ultrasonic Phased Array Imaging Approach Using Omni-Directional Velocity Correction for Quantitative Evaluation of Delamination in Composite Structure

Mechanical and Microstructural Assessment of Inhomogeneities in Oxide Ceramic Matrix Composites Detected by Air-Coupled Ultrasound Inspection

Adhesive Porosity Analysis of Composite Adhesive Joints using Ultrasonic Guided Waves

Ultrasonic detection and characterization of delamination and rich resin in thick composites with waviness

Impact Damage Imaging and Quantification in Composite Structures Utilizing Nonlinear Ultrasonics Measured by Scanning Laser Doppler Vibrometry

Ultrasonic resonance evaluation method for deep interfacial debonding defects of multilayer adhesive bonded materials

Nondestructive Testing of Composite Materials: An In-Depth Study Using Ultrasonic Immersion Inspection

Nonlinear Ultrasonic C-Scan Imaging for Contact-Type Defects in Diffusion-Bonded Joints—A Case Study

Visualization of hidden delamination and debonding in composites through noncontact laser ultrasonic scanning

Interfacial Debonding Detection for Steel-Concrete Composite Structures Part II: Scanning Doppler Laser-Based MASW and Microphone Combination-Based Impact-Acoustic Vibration

Low Frequency Ultrasonic Multi-mode Lamb-like Wave Method for Characterizing the Ultra-thin Bonding Composite

Air-coupled transducer tilted C-scan for delamination introduced during the manufacturing process in CFRP plates