Abstract:Functionalized aluminosilicate materials were studied as catalysts for the conversion of different cyclic carbonates to the corresponding epoxides by the addition of CO2. Aluminum was incorporated in the mesostructured SBA-15 silica network. Thereafter, functionalization with imidazolium chloride or magnesium oxide was performed on the Al_SBA-15 supports. The isomorphic substitution of Si with Al and the resulting acidity of the supports were investigated via 27Al magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy and NH3 adsorption microcalorimetry. The Al content and the amount of MgO were quantified via inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis. The anchoring of the imidazolium salt was assessed by 29Si and 13C MAS NMR spectroscopy and quantified by combustion chemical analysis. Textural and structural properties of supports and catalysts were studied by N2 physisorption and X-ray diffraction (XRD). The functionalized systems were then tested as catalysts for the conversion of CO2 and epoxides to cyclic carbonates in a batch reactor at 100 or 125 °C, with an initial CO2 pressure (at room temperature) of 25 bar. Whereas the activity of the MgO/xAl_SBA-15 systems was moderate for the conversion of glycidol to the corresponding cyclic carbonate, the Al_SBA-15-supported imidazolium chloride catalysts gave excellent results over different epoxides (conversion of glycidol, epichlorohydrin, and styrene oxide up to 89%, 78%, and 18%, respectively). Reusability tests were also performed. Even when some deactivation from one run to the other was observed, a comparison with the literature showed the Al-containing imidazolium systems to be promising catalysts. The fully heterogeneous nature of the present catalysts, where the inorganic support on which the imidazolium species are immobilized also contains the Lewis acid sites, gives them a further advantage with respect to most of the catalytic systems reported in the literature so far.

Characterization and use of MoO3 modified alumosilicates in Prins cyclization of isoprenol and isovaleraldehyde

The Synergy Effect in Tio2 Supported Bi-Mo Catalysts for Facile and Environmentally-Friendly Synthesis of Pyridylaldehydes from Oxidation of Picolines

MoO3-MCM-41 materials as effective catalysts in Prins reaction of isoprenol with butanal followed by esterification in one-pot reaction arrangement

Synthesis and characterization of alumina supported molybdosilicic acid (SiMo12/Al2O3): Efficient solid acid catalyst for the synthesis of pyranopyrazole derivatives

Preparation of PtCl_6~(2-) Intercalated Mg/Al-hydrotalcite Catalyst and Its Catalytic Activities for the Hydrosilylation of Olefins

Preparation of PtCl62-Intercalated Mg/Al-hydrotalcite Catalyst and Its Catalytic Activities for the Hydrosilylation of Olefins

Micro and Mesoporous Materials Based on Zeolite Y for the Florol Synthesis Via the Prins Cyclization of Isoprenol

Olefin Metathesis over Heterogeneous Catalysts: Interfacial Interaction Between Mo Species and a Hβ−Al2O3 Composite Support

Preparation of silica-supported late transition metal catalyst and ethylene polymerization

Synthesis and Characterization of Alkyl-Imidazolium-Based Periodic Mesoporous Organosilicas: A Versatile Host for the Immobilization of Perruthenate (Ruo4-) in the Aerobic Oxidation of Alcohols

MAS NMR, TPR, and TEM Studies of the Interaction of NiMo with Alumina and Silica–alumina Supports

Modifier Effect in Silica-Supported FePO4 and Fe-Mo-O Catalysts for Propylene Glycol Oxidation

ZnAlMCM-41: a very ecofriendly and reusable solid acid catalyst for the highly selective synthesis of 1,3-dioxanes by the Prins cyclization of olefins

The Molybdenum Species of MoO3/SiO2 and Their Catalytic Activities for the Epoxidation of Propylene with Cumene Hydroperoxide

Iron Chloride Supported on Pyridine-Modified Mesoporous Silica: an Efficient and Reusable Catalyst for the Allylic Oxidation of Olefins with Molecular Oxygen

Synthesis, characterization and catalytic performance of SAPO-34 molecular sieves for methanol-to-olefin (MTO) reaction

Aluminosilicate-Supported Catalysts for the Synthesis of Cyclic Carbonates by Reaction of CO2 with the Corresponding Epoxides

Effects of Preparation Procedure in Sol–gel Method on Performance of MoO3/SiO2 Catalyst for Liquid Phase Epoxidation of Propylene with Cumene Hydroperoxide

Acidity and porosity properties of zeolites affect their catalytic performance in thymol synthesis

Dehydration of Isopropanol over Silica-Supported Heteropoly Acids

Synthesis of SAPO-44 molecular sieve and its catalytic performance in methanol-to-olefins reaction