Abstract:Improving the measurement accuracy is a necessary condition for sea surface altimetry using the Global Navigation Satellite System Reflectometry (GNSS-R). The ionosphere and troposphere delay the transmission of satellite signals, which directly affect the measuring accuracy. The influence of the atmospheric environment on GNSS-R altimetry differs from different platforms. By analyzing and sorting out the altimetry data of airborne and spaceborne platforms, this paper studies the variation law of signal delay in the altimetry process from the point of view of mathematical geometry, which provides an example for improving the precision of GNSS-R altimetry measurements. Firstly, in order to facilitate data analysis, this paper constructed an altimetry model with the GNSS satellite position, specular reflection point position, receiver position as nodes, classified direct signals, and reflected signals. Secondly, calculate ionospheric puncture point coordinates , and interpolate GIM products provided by IGS using time and puncture point coordinates to obtain the VTEC value in the vertical direction of the puncture point, which was converted into the path direction STEC by projection function, the ionospheric delay of each part was obtained in this way. The tropospheric delay of each part is considered for the along-path component and the geometric component, the delay of along-path component was calculated by the UNB3m model, and the delay of geometric component was calculated by the equation provided by Nikolaidou (Nikolaidou et al., 2021). Thirdly, by comparing the sea surface height inversion results with or without atmospheric delay correction with the mean sea surface height provided by DTU15, the measurement accuracy with atmospheric delay correction is obviously improved. The study results of the influence of atmospheric delay on the altimetry experiments precision error of airborne and spaceborne platforms show that the error magnitude is consistent with the existing literature. In the airborne experiment, the influence of the ionosphere is negligible and the troposphere has sub-meter influence on altimetry results, among which the tropospheric along-path delay component occupies a high proportion. The geometric delay component has a high correlation with the satellite elevation angle and its influence on the measurement accuracy decreases with the elevation angle increase. The effect of this factor can be effectively weakened by setting a high satellite cutoff angle. In the spaceborne experiment, the effect of atmospheric delay on altimetry results fluctuates in the range of 3∼5 m when the satellite elevation angle is greater than 60°. In this paper, the method of calculating signal atmospheric delay through geometric relation to improving the measurement accuracy can provide an example for the atmospheric delay correction of GNSS-R ocean altimetry with high precision and spatial resolution in future research.

Multimode Hybrid Geometric Calibration of Spaceborne SAR Considering Atmospheric Propagation Delay

Improvement of the spaceborne synthetic aperture radar stereo positioning accuracy without ground control points

Geometric Calibration and Accuracy Verification of the GF-3 Satellite

Geometric Auto-Calibration of SAR Images Utilizing Constraints of Symmetric Geometry

A Geometric Auto-Calibration Method for Multiview UAV-Borne FMCW SAR Images

Joint Estimation of Ground Displacement and Atmospheric Model Parameters in Ground-Based Radar

High Precision Airborne Sar Geometric Calibration And Geolocation Based On An Improved Near Range Model

Feasibility of Replacing the Range Doppler Equation of Spaceborne Synthetic Aperture Radar Considering Atmospheric Propagation Delay with a Rational Polynomial Coefficient Model

Geometric Calibration and Geolocation of Airborne SAR Images

Spaceborne SAR Image Geometric Rectification Method Without Ground Control Points Using Orbit Parameters Modulation

Geometric Accuracy Improvement Method for High-Resolution Optical Satellite Remote Sensing Imagery Combining Multi-Temporal SAR Imagery and GLAS Data

In-orbit Geometric Calibration for Long-linear-array and Wide-swath Whisk-broom TIS of SDGSAT-1

First Assessment of Bistatic Geometric Calibration and Geolocation Accuracy of Innovative Spaceborne Synthetic Aperture Radar LuTan-1

Calibration of airborne interferometric SAR data by external dem without artificial calibrators

A Method by using predefined windows to improve the InSAR atmospheric correction model based on GNSS ZTD and its horizontal delay gradient

Geo-Positioning Accuracy Improvement of Multi-Mode GF-3 Satellite SAR Imagery Based on Error Sources Analysis

Time- and Space-Varying Atmospheric Phase Correction in Discontinuous Ground-Based Synthetic Aperture Radar Deformation Monitoring

A New Combined Adjustment Model for Geolocation Accuracy Improvement of Multiple Sources Optical and SAR Imagery

Position and Orientation System Error Analysis and Motion Compensation Method Based on Acceleration Information for Circular Synthetic Aperture Radar

Spaceborne SAR Radiometric Cross-Calibration Considering Typical Scattering Effects in Building Areas

Correction of Atmospheric Delay Error of Airborne and Spaceborne GNSS-R Sea Surface Altimetry